• Korean Journal of Materials Research
• /
• v.30 no.9
• /
• pp.447-452
• /
• 2020

In this work, α-Fe₂O₃ nanocrystals are synthesized by co-precipitation method and used as adsorbent to remove Cr⁶⁺, Cd²⁺, and Pb²⁺ from wastewater at room temperature. The prepared sample is evaluated by XRD, BET surface area, and FESEM for structural and morphological characteristics. XRD patterns confirm the formation of a pure hematite structure of average particle size of ~ 40 nm, which is further supported by the FESEM images of the nanocrystals. The nanocrystals are found to have BET specific surface area of ~ 39.18 m² g^-1. Adsorption experiments are carried out for the different values of pH of the solutions, contact time, and initial concentration of metal ions. High efficiency Cr⁶⁺, Cd²⁺, and Pb²⁺ removal occur at pH 3, 7, and 5.5, respectively. Equilibrium study reveals that the heavy metal ion adsorption of the α-Fe₂O₃ nanocrystals followed Langmuir and Freundlich isotherm models. The Cr⁶⁺, Cd²⁺, and Pb²⁺ adsorption equilibrium data are best fitted to the Langmuir model. The maximum adsorption capacities of α-Fe₂O₃ nanocrystals related to Cr⁶⁺, Cd²⁺, and Pb²⁺ are found to be 15.15, 11.63, and 20 mg g^-1, respectively. These results clearly suggest that the synthesized α-Fe₂O₃ nanocrystals can be considered as potential nano-adsorbents for future environmental and health related applications.

• Journal of Electrochemical Science and Technology
• /
• v.2 no.1
• /
• pp.39-44
• /
• 2011

Sub-micrometer $La_{0.8}Ca_{0.2}CrO_3$ powders for ceramic interconnects of solid oxide fuel cells were synthesized by the aqueous combustion process. The materials were prepared from the precursor solutions with different glycine (fuel)-to-nitrate (oxidant) ratios (${\phi}$). Single-phase $La_{0.8}Ca_{0.2}CrO_3$ powders with a perovskite structure were obtained after combustion when ${\phi}$ was equal to or larger than 0.480. Especially, the stoichiometric precursor with ${\phi}$ = 0.555 yielded the spherical $La_{0.8}Ca_{0.2}CrO_3$ particles with 150-250 nm diameters after calcination at $1000^{\circ}C$. When compared with the powders synthesized by the solid-state reaction, the combustion-derived, fine powders exhibited improved sinterability, leading to near-full densification at $1400^{\circ}C$ in oxidizing atmospheres. Moreover, a small quantity of glass additives was used to reduce the sintering temperature, and considerable densification was indeed achieved at temperatures as low as $1100^{\circ}C$.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.6
• /
• pp.2895-2899
• /
• 2016

Background: Increasing breast cancer (BC) incidence rates have been reported from India; causal factors for this increased incidence are not understood and diagnosis is mostly in advanced stages. Trivandrum exhibits the highest BC incidence rates in India. This study aimed to estimate trends in incidence by age from 2005-2014, to predict rates through 2020 and to assess the stage at diagnosis of BC in Trivandrum. Materials and Methods: BC cases were obtained from the Population Based Cancer Registry, Trivandrum. Distribution of stage at diagnosis and incidence rates of BC [Age-specific (ASpR), crude (CR) and age-standardized (ASR)] are described and employed with a joinpoint regression model to estimate average annual percent changes (AAPC) and a Bayesian model to estimate predictive rates. Results: BC accounts for 31% (2681/8737) of all female cancers in Trivandrum. Thirty-five percent (944/2681) are <50 years of age and only 9% present with stage I disease. Average age increased from 53 to 56.4 years (p=0.0001), CR (per $10^5$ women) increased from 39 (ASR: 35.2) to 55.4 (ASR: 43.4), AAPC for CR was 5.0 (p=0.001) and ASR was 3.1 (p=0.001). Rates increased from 50 years. Predicted ASpR is 174 in 50-59 years, 231 in > 60 years and overall CR is 80 (ASR: 57) for 2019-20. Conclusions: BC, mostly diagnosed in advanced stages, is rising rapidly in South India with large increases likely in the future; particularly among post-menopausal women. This increase might be due to aging and/or changes in lifestyle factors. Reasons for the increased incidence and late stage diagnosis need to be studied.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.1
• /
• pp.59-63
• /
• 2008

Purpose: Ti thin films were deposited on slide glass and CR-39 lenses using small magnetron sputtering apparatus to of Ti thin films. Methods: The thickness of Ti thin films were measured by cross section SEM, the transmittance and reflectance of them were obtained using spectrophotometer, the refractive index and extinction of them were obtained from VASE data. Results: The transmittances of Ti thin films with 60 nm, 120 nm, 140 nm thickness were a little change within the visual region from 400 nm to 750 nm, but were increased a little amount at near 400 nm. The transmittance of 60 nm, 120 nm, 140 nm Ti thickness in d-line was 30%, 25%, 20%, respectively. Also, it was shown that the refractive indices and extinction coefficients of the Ti thin films obtained from VASE were similar to those of Ti thin film offered macleod program. Conclusions: Ti films on CR-39 with these transmittances were available for sunglass lens. It was indicated that the refractive indices and extinction coefficients of the Ti thin films were decreased with the thickness of Ti thin film, for the thickness of Ti thin films was due to very thin.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.355-362
• /
• 2000

The objective of this paper is to estimate the pollutant load based on event mear concentrations(EMC) in industrial complex. Eight sub-basins in the Chongju industrial complex were selected for sampling and study with different characteristics during the period from June 1997 to August 1998. During the storm events, measured EMC ranges of $BOD_5$, COD, SS, TKN, TP, HEM, $NO_3-N$, $PO_4-P$, Cr, Pb, Cu and Fe in the industrial complex watersheds were 11~176mg/L, 40~502mg/L, 23~633mg/L, 104~20.9mg/L, 0.22~7.51mg/L, 12.7~548.7mg/L, 0.06~2.66mg/L, 0.12~3.39mg/L, 0.01~0.50mg/L. 0.02~0.42mg/L, 0.01~0.15mg/L and 1.29~11.51mg/L respectively. And the calculated annual average pollutant unit loadings of $BOD_5$ COD, SS, TKN, $NO_3-N$, $PO_4-P$, TP, HEM, Cr, Pb, Cu and Fe were 374.4kg/ha/yr 924.1kg/ha/yr, 983.6kg/ha/yr, 48.8kg/ha/yr, 8.1kg/ha/yr, 9.7kg/ha/yr, 17.8kg/ha/yr 943.0kg/ha/yr, 0.7kg/ha/yr, 0.9kg/ha/yr, 0.3kg/ha/yr and 28.9kg/ha/yr, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.3
• /
• pp.112-117
• /
• 2017

Ion exchange fiber, PADD was synthesized by the reaction between PAN based acrylic fiber and DETA with $AlCl_3{\cdot}6H_2O$, and was analyzed by FT-IR and SEM to investigate its characteristics. The experimental results of Cr(VI) removal by PADD were better fitted with Langmuir adsorption isotherm, and the maximum uptake value ($Q_{max}$) was calculated to be 6.93 mmol/g. The kinetic data can be well described by Lagergen pseudo-second order rate model. The Cr(VI) adsorption capacity of PADD was 4.11 mmol/g at pH 2, which shows the effect of pH changes on the removal of Cr(VI). The adsorption selectivity of Cr(VI) was higher than phosphate and As(V). Total ion exchange capacity of PADD was 4.70 mmol/g, which was measured by acid-base back titration.

• Journal of Environmental Health Sciences
• /
• v.39 no.5
• /
• pp.408-417
• /
• 2013

Objectives: Phthalates are used as plasticizers in polyvinyl chloride (PVC) plastics. As phthalate plasticizers are not chemically bound to the PVC, they can leach, migrate or evaporate into indoor air and atmosphere, foodstuffs, other materials, etc. Therefore, humans are exposed through ingestion, inhalation, and dermal exposure over their entire lifetime, including during intrauterine development. In particular, university students have a great number of opportunities to contact products including phthalates during campus life (food packaging, body care products, cosmetic, lotions, aftershave, perfume etc.). The purpose of this study was to examine levels of phthalate exposure as undergraduate students begin to use pharmaceuticals and personal care products including phthalates. Methods: Phthalate metabolites, mono-ethyl phthalate (MEP), mono-n-butyl phthalate (MnBP), mono-isobutyl phthalate (MiBP), mono-2- ethylhexyl phthalate (MEHP), {(mono-(2-ethyl-5-hydroxyhexyl) phthalate (MEHHP}, and mono-(2-ethlyl-5-oxohexyl) phthalate (MEOHP} were examined. 80 urine samples collected from university students were analyzed using LC/MS/MS(API 4000, Applied Bioscience) with on-line enrichment and columnswitching techniques. This study was carried out at Y university located in Gyonggi Province from 2008 to 2011. Results: The detection limit of phthalate metabolites were 0.03 ng/mL for MEP, 0.11 ng/mL for MnBP, 0.08 ng/mL for MiBP, 0.93 ng/mL for MEHP, 0.19 ng/mL for MEOHP and 0.16ng/mL for MEHHP. MnBP showed the highest urinary levels (median: 31.6 ug/L, 24.8 ug/g creatinine (cr)). Concentrations were also high for MEHHP (median: 24.1 ug/L, 19.0 ug/g cr), followed by MEOHP (median: 22.8 ug/L, 17.9 ug/g cr). In individual cases, the maximum level reached up to 348 ug/L, and 291 ug/g cr, respectively. The urinary and creatinine adjusted levels of MEP were lower than those for DBP and DEHP metabolites, but were higher in 95th percentiles. As a result, the mean daily DEP intake value was 2.3 ${\mu}g/kg$ bw/day, 3.5 ${\mu}g/kg$ bw/day for DEHP and 4.9 ${\mu}g/kg$ bw/day for DBP. Conclusion: These students' phthalate exposure levels were below the international safe level set by the EU, but higher than the 2012 KFDA survey of the age group from 3 to 18.

• Korean Journal of Plant Taxonomy
• /
• v.36 no.4
• /
• pp.335-360
• /
• 2006

The distribution on 88 taxa of wild orchids in the Korean Peninsula was investigated by the examinations of specimens and the distribution maps were presented. The species numbers distributed at each eight floral regions in the Korean Peninsula are as the followings; Gapsan Province 27 taxa, Gwanbuk 21, Gwanseo 13, Middle 37, South 39, Southern-coast 33, Jeju 64 and Ulleung 19. Most species (72.7%) of Korean wild orchids are found in the Jeju Island. Eighteen taxa of them are restricted to the island in the Korean Peninsula. Among Korean species, 30 taxa grow at evergreen broad-leaved forests, and 16 are northern elements distributed at high mountains or northern part. In terms of distribution, the Korean wild orchid species are classified into IUCN Red List Categories by a modified criterion for Korean plants. No orchid species included EX or EW categories is found in the Korean Peninsula. Ten species are designated to be in CR category; Cymbidium kanran, C. lancifolium, C. ensifolium, Cypripedium japonicum, Cyrtosia septentrionalis, Dendrobium moniliforme, Habenaria chejuensis, H. radiata, Neofinetia falcata and Sedirea japonica, of which C. ensifolium and H. chejuensis are regarded as CR species for the first time. On the other hand, 22 taxa are classified into EN category, and the following nine taxa are newly proposed to be EN species; Gastrochilus japonicum, G. fuscopunctatus, Gastrodia verrucosa, Habenaria flagellifera, Herminium lanceum var. longicrure, Chamaegastrodia sikokiana, Lecanorchis kiusiana, Neottia hypocastanoptica and Tipularia japonica.

• Journal of the Korean Ceramic Society
• /
• v.39 no.9
• /
• pp.851-856
• /
• 2002

Tribological behavior of plasma-sprayed $Cr_2O_3$-based coatings containing $MoO_3$ at 450$^{\circ}C$ was investigated to understand the influence of $MoO_3$. A reciprocal disc-on-plate type tribo-tester was employed to examine fricition and wear behavior of the specimens. The microstructure and phase composition of the coating was characterized with Transmission Electron Microscopy(TEM). The TEM analysis indicated that $MoO_3$ was dispersed into the grain boundary, resulting in the increase of the hardness and density of the coating. Worn surfaces were investigated by scanning electron microscopy and chemistry of the worn surfaces was analyzed using a X-ray Photoelectron Spectrometer(XPS). The results showed that the friction coefficient of the $MoO_3$-added coatings was lower than that without $MoO_3$ addition. The larger protecting layers were observed at the worn surface of plasma spray coated specimens with $MoO_3$ composition in the protecting layer appears to be more favorable in reducing the friction.

• Proceedings of the Optical Society of Korea Conference
• /
• 2007.02a
• /
• pp.191-192
• /
• 2007