Browse > Article
http://dx.doi.org/10.4191/KCERS.2002.39.9.851

Friction and Wear Properties of Plasma-sprayed Cr2O3-MoO3 Composite Coatings at High Temperature  

Lyo, In-Woong (Tribology Research Center, Korea Institute of Science and Technology)
Ahn, Hyo-Sok (Tribology Research Center, Korea Institute of Science and Technology)
Lim, Dae-Soon (Department of Material Science and Engineering, Korea University)
Publication Information
Abstract
Tribological behavior of plasma-sprayed $Cr_2O_3$-based coatings containing $MoO_3$ at 450$^{\circ}C$ was investigated to understand the influence of $MoO_3$. A reciprocal disc-on-plate type tribo-tester was employed to examine fricition and wear behavior of the specimens. The microstructure and phase composition of the coating was characterized with Transmission Electron Microscopy(TEM). The TEM analysis indicated that $MoO_3$ was dispersed into the grain boundary, resulting in the increase of the hardness and density of the coating. Worn surfaces were investigated by scanning electron microscopy and chemistry of the worn surfaces was analyzed using a X-ray Photoelectron Spectrometer(XPS). The results showed that the friction coefficient of the $MoO_3$-added coatings was lower than that without $MoO_3$ addition. The larger protecting layers were observed at the worn surface of plasma spray coated specimens with $MoO_3$ composition in the protecting layer appears to be more favorable in reducing the friction.
Keywords
Plasma-sprayed coatings; $Cr_2O_3$; $MoO_3$; Friction; Wear;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 J. M. Cuetos, E. Fernandez, R. Vijande, A. Rincon and MC. Perez, 'Plasma-sprayed Coatings Treated with Lasers: Tribological Behavior of${Cr}_2O_3$,' Wear, 169 173-79 (1993)   DOI   ScienceOn
2 H-S. Ahn and S. K. Lee, 'Sliding Wear of Plasma-sprayed Chromium Oxide-silica Coating,' Proceedings of 1st World Tribology Congress, 115 (1997)
3 H-S. Ahn, I. W. Lyo and D. S. Lim, 'Influence of Molybdenum Composition in Chromium Oxide-based Coatings on Their Tribological Behavior,' Surface and Coatings Technology, 133-134 351-36 (2000)
4 H-S. Ahn and O. K. Kwon, 'Tribological Behaviour of Plasma-sprayed Chromium Oxide Coating,' Wear, 225-229 814-824 (1999)
5 I. W. Lyo, H-S. Ahn and D. S. Lim, 'Friction and Wear Properties of Plasma-sprayed ${Cr}_2O_3-MoO_3$ Composite Coatings at Room Temperature,' J. Kor. Ceram. Soc., 39 [1] 79-85 (2002)   DOI   ScienceOn
6 J. Y. Kim. D. S. Lim and H-S. Ahn, 'High Temperature Wear of Plasma-sprayed Zr$O_2-Y_2O_3$ Coatings,' J. Kor. Ceram. Soc., 30 [12] 1059-65 (1993)
7 J. Y. Kim and D. S. Lim, 'The Effects of the Annealing Temperature and Environments on Room Temperature Wear Behavior of Plama-sprayed Partially Stabilized Zirconia Coatings,' J. Kor. Ceram. Soc., 31 [10] 1176-80 (1994)
8 H-S. Ahn, J. Y. Kim and D. S. Lim, 'Tribological Behavior of Plasma-sprayed Zirconia Coatings,' Wear, 203-204 77-87 (1997)   DOI   ScienceOn
9 W. Bryzik and R. Kamo, 'TACOM/Cummins Adiabatic Engine Program,' SAE Tech. Paper 830314 (1983)
10 Thermal Barrier Coatings for Reciprocal Engines, Newsletter, Surface Architecture, ANAPS-Materials Publication, 2 No. 3
11 L. M. Sheppard, 'Reliable Ceramics for Heat Engines,' Advanced Materials and Processes, 130 54-66 (1986)
12 I. W. Lyo and H-S. Ahn, 'Study on The Spraying Parameters of a Plasma-sprayed Hydroxyapatite Coating,' J. Kor. Ceram. Soc., 36 [4] 444-50 (1999)
13 A. A. Ibrahim and G. A. El-Shobaky. 'Solid-solid Interactions in The $MoO_3-Al_2O_3$ System,' Thermochim. Acta, 147 175-88 (1989)   DOI   ScienceOn
14 K. Komvopoulos and H. Li, 'The Effect of Tribofilm Formation and Humidity on the Friction and Wear Properties of Ceramic Materials,' J. Tribo., 114 131-40 (1992)   DOI
15 R. J. Bratton and S. K. Lau, 'Zirconia Thermal Barrier Coatings,' Advances in ceramics, 3 226-40 (1981)
16 H-S. Ahn and O. K. Kwon., 'Wear Behavior of Plasmasprayed Partially Stabilized zirconia on a Steel Substrate,' Wear, 162-164 636-44 (1993)   DOI   ScienceOn