• Analytical Science and Technology
• /
• v.6 no.2
• /
• pp.217-223
• /
• 1993

Thin films of the Au/Cr, Au/Ni/Cr and Au/Pd/Cr systems were deposited on alumina substrates at ambient temperature and $250^{\circ}C$ in a high-vacuum resistance heating evaporator and annealed at $300^{\circ}C$, $450^{\circ}C$ and $600^{\circ}C$ for 1 hour in air, respectively. The film thicknesses of Au, Ni(or pd), and Cr were $1000{\AA}$, $300{\AA}$, and $50{\AA}$, respectively. The substrate temperature during deposition and the post-deposition annealing temperature affected the sheet resistance of thin-films due to the inter-diffusion of each layer. As a result of Auger depth profile analysis, in the Au/Cr system Cr already diffused out to Au surface during deposition at the substrate temperature of $250^{\circ}C$ and Au distribution changed after heat treatment. In the Au/Ni/Cr and Au/Pd/Cr systems, diffusion phenomena of Ni and Pd were found and especially Ni (approximately 45 at.%) diffused out to Au surface and oxidized.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1675-1680
• /
• 2012

Three new cyanide-bridged $Cr^{III}Mn^{II}$ binuclear complexes, $[Mn(phen)_2Cl][Cr(bpmb)(CN)_2]{\cdot}H_2O$ ($\mathbf{1}$) (phen = 1,10-phenanthroline, $bpdmb^{2-}$ = 1,2-bis(pyridine-2-carboxamido)-4-methyl-benzenate), $[Mn(phen)_2Cl][Cr(bpmb)-(CN)_2]{\cdot}H_2O$ ($\mathbf{2}$) ($bpdmb^{2-}$ = 1,2-bis(pyridine-2-carboxamido)-4,5-dimethyl-benzenate), and $[Mn(phen)_2Cl]-[Cr(bpClb)(CN)_2]{\cdot}CH_3OH{\cdot}H_2O$ ($\mathbf{3}$) ($bpClb^{2-}$ = 1,2-bis(pyridine-2-carboxamido)-4-chloro-benzenate) were obtained based on $Mn(phen)_2Cl_2$ and a series of dicyanidechromate(III) building blocks. Single crystal X-ray diffraction analysis shows the structures of the three complexes are dimeric type with two different metal centers linked by a cyanide group from corresponding dicyanidechromate(III) building block. Magnetic investigations indicate the existence of relatively weak antiferromagnetic coupling between Cr(III) and Mn(II) ions with best-fit constants $J_{CrMn}=-2.78(5)cm^{-1}$ for $\mathbf{1}$, $J_{CrMn}=-3.02(2)cm^{-1}$ for $\mathbf{2}$ and $J_{CrMn}=-2.27(3)cm^{-1}$ for $\mathbf{3}$ based on the spin exchange Hamiltonian = $-2J_{CrMn}\hat{S}_{Cr}\hat{S}_{Mn}$. The magneto-structural correlation of cyanide-bridged $Cr^{III}Mn^{II}$ complexes has been discussed at last.

• Journal of the Korean Ceramic Society
• /
• v.54 no.6
• /
• pp.511-517
• /
• 2017

With different working pressures and substrate biases, Cr-Al-N coatings were deposited by hybrid physical vapor deposition (PVD) method, consisting of unbalanced magnetron (UBM) sputtering and arc ion plating (AIP) processes. Cr and Al targets were used for the arc ion plating and the sputtering process, respectively. Phase analysis, and composition, binding energy, and microstructural analyses were performed using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and field emission scanning electron microscopy (FESEM), respectively. Surface droplet size of Cr-Al-N coatings was found to decrease with increasing substrate bias. A decrease of the deposition rate of Cr-Al-N films was expected due to the increase of substrate bias. The coatings were grown with textured CrN phase and (111), (200), and (220) planes. X-ray diffraction data show that all Cr-Al-N coatings shifted to lower diffraction angles due to the addition of Al. The XPS results were used to determine the $Cr_2N$, CrN, and (Cr,Al)N binding energies. The compositions of the Cr-Al-N films were measured by XPS to be Cr 23.2~36.9 at%, Al 30.1~40.3 at%, and N 31.3~38.6 at%.

• Nano
• /
• v.13 no.10
• /
• pp.1850118.1-1850118.17
• /
• 2018

Nanoparticles of the semiconductor catalyst $Cd_xZn_{1-x}S$ were embedded into the metal organic framework MIL-101(Cr) to obtain $Cd_xZn_{1-x}S@MIL-101$(Cr) nanocomposites. These materials not only possess high surface areas and mesopores but also show good utilization of light energy. The ultraviolet-visible diffuse reflectance patterns of $Cd_xZn_{1-x}S@MIL-101$(Cr) nanocomposites showed that $Cd_{0.8}Zn_{0.2}S@MIL-101$(Cr) possessed good visible light response ability among the synthesized nanocomposites. The photocatalytic performance of the $Cd_xZn_{1-x}S@MIL-101$(Cr) nanocomposites were tested via degradation and mineralization of methylene blue in neutral water solution under light irradiation using a 300W xenon lamp. As a result, using $Cd_{0.8}Zn_{0.2}S@MIL-101$(Cr) as a catalyst, 99.2% of methylene blue was mineralized within 30 min. Due to the synergistic effect of adsorption by the MIL-101(Cr) component and photocatalytic degradation provided by the $Cd_{0.8}Zn_{0.2}S$ component, the $Cd_{0.8}Zn_{0.2}S@MIL-101$(Cr) catalyst displayed superior photocatalytic performance relative to $Cd_{0.8}Zn_{0.2}S$ and MIL-101(Cr). Furthermore, $Cd_{0.8}Zn_{0.2}S@MIL-101$(Cr) possessed excellent stability during photodegradation and exhibited good reusability. The remarkable photocatalytic performance of $Cd_{0.8}Zn_{0.2}S@MIL-101$(Cr) is likely due to the effective transfer of electrons and holes at the heterojunction interfaces.

• Journal of Advanced Navigation Technology
• /
• v.28 no.4
• /
• pp.532-537
• /
• 2024

In this study, wear characteristics and microstructure changes due to changes in alloy composition of Ni-Cr-Mo-V and Ni-Cr-Mo low-alloy steels used in brake discs for transportation system such as aircraft and high-speed trains. As a result of the hardness test, the hardness of C-Mo-V steel was the highest at 39.4±0.9HRc, and the hardness of Ni-Cr-Mo steel was the lowest at 32.4±0.6HRc. The friction coefficient tended to decrease as the vertical load increased. At a vertical load of 1 N, the friction coefficient of Ni-Cr-Mo steel was the highest at 0.842, and at a vertical load of 5 N, Mn-Cr-V steel was the highest at 0.696. Ni-Cr-Mo showed the largest wear scar width, depth, and wear amount, with a width of 711 ㎛, a depth of 8.24 ㎛, and a wear amount of 11 mg under a vertical load of 1 N, and a width of 1,017 ㎛, a depth of 19.17 ㎛, and a wear amount of 17 mg under a vertical load of 5 N. As a result of wear mechanism analysis, ploughing, delamination, and adhesion in all specimens, with plastic deformation being more prominently observed in Ni-Cr-Mo.

• Journal of Powder Materials
• /
• v.30 no.3
• /
• pp.233-241
• /
• 2023

In this study, we evaluated the effects of acid leaching on the properties of Cr powder synthesized using self-propagating high-temperature synthesis (SHS). Cr powder was synthesized from a mixture of Cr2O3 and magnesium (Mg) powders using the SHS Process, and the byproducts after the reaction were removed using acid leaching. The properties of the recovered Cr powder were analyzed via X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), particle size analysis (PSA), and oxygen content analysis. The results show that perfect selective leaching of Cr is challenging because of various factors such as incomplete reaction, reaction kinetics, the presence of impurities, and incompatibility between the acid and metal mixture. Therefore, this study provides essential information on the properties under acidic conditions during the production of high-quality Cr powder using a self-propagating high-temperature synthesis method.

• Korean Journal of Materials Research
• /
• v.11 no.4
• /
• pp.324-328
• /
• 2001

CrN films were deposited onto STD61 steel substrates using an arc-ion plating apparatus, with and without ion-nitriding pretreatment, and their oxidation was studied between 700 and $900^{\circ}C$ for 40hr in air. The oxidation behavior was examined by thermogravimetric analyses, X-ray diffraction. EDS and SEM. The deposited CrN films consisted of CrN and $Cr_2$N phases. The CrN films increased the oxidation resistance of the substrate by forming a protective $Cr_2$$O_3$ layer. The ion-nitriding pretreatment has not affected the oxidation resistance of the CrN film.

• Horticultural Science & Technology
• /
• v.29 no.6
• /
• pp.610-616
• /
• 2011

Clubroot disease caused by Plasmodiophora brassicae, induces damage to cruciferous vegetables worldwide. For control of the disease, many CR (clubroot resistant) $F_1$ hybrid cultivars of Chinese cabbage have been bred and released in Korea. In this study, we determined the race of 10 field isolates of P. brassicae collected from ten regions in Korea using Williams' differential varieties and investigated the degree of resistance of 25 commercial CR cultivars of Chinese cabbage to the isolates. The clubroot pathogens were assigned into two (HS and YC), two (HN1 and HN2), two (DJ and SS) and four (GS, GN, JS, and PC) isolates for race 2, race 4, race 5, race 9, respectively. All CR cultivars showed similar response, resistant or susceptible, to each isolate and the P. brassicae isolates were divided into two groups. Among them, the DJ, GS, GN, HS, and JS isolates could not infect the CR cultivars. In contrast, the SS, HN1, HN2, PC, and YC isolates caused severe clubroot disease on the CR cultivars like susceptible cultivars. Even though they belong to the same race, the CR cultivars showed a different response to the pathogens. The results suggest that the breakdown of CR in Chinese cabbage has already occurred in cultivation areas of Korea and resistance source introduced in CR cultivars may be very limited. In addition, it is likely that resistance genes of Williams' differential varieties to P. brassicae are different from the gene of CR cultivars of Chinese cabbage used in the study.

• Korean Journal of Materials Research
• /
• v.9 no.11
• /
• pp.1137-1143
• /
• 1999

Microstructure and mechanical properties of Mod.9Cr-1Mo and W added 9Cr-0.5Mo2W steels were investigated for liquid metal reactor (LMR) heat exchange tube. The tempering temperatures at which cell structure was formed were $700^{\circ}C$ for Mod.9Cr-1Mo steel and $750^{\circ}C$ for W added 9Cr0.5Mo-2W steel. indicating the recovery of dislocation was delayed by the addition of W. 9Cr-0.5Mo-2W steel had the same kinds of precipitates with Mod.9Cr-1Mo steel, but the W was included in the precipitates in 9Cr-0.5Mo-2W steel. Micro-hardness and ultimate tensile strength of 9Cr-0.5Mo-2W steel were higher than those of Mod.9Cr-1Mo steel. The impact property of Mod.9Cr-1Mo steel was superior to that of 9Cr-0.5Mo-2W steel.

• Journal of Animal Science and Technology
• /
• v.50 no.3
• /
• pp.355-362
• /
• 2008

This study was carried out to evaluate effects of either organic or inorganic sources of both chromium and copper on growth performances, nutrients digestibility and fecal Cr, Cu, and Zn excretion in growing pigs. A total of 36 growing pigs((Landrace×Yorkshire)×Duroc, weighing 61.2kg in average) were allotted to 4 treatments with 3 replicates and 3 pigs per replicate. Four treatments were designated by supplemental sources of both chromium and copper as follows: ①200ppb Cr as Cr-methionine chelate(CrMet) and 200ppm Cuas copper methionine chelate(CuMet), ②200ppb Cr as CrMet and 200ppm Cu as copper sulfate(CuSO4), ③200ppb Cr as chromium chloride(CrCl3) and 200ppm Cu as CuMet, ④200ppb Cr as CrCl3 and 200ppm Cu as CuSO4. Growth performance was highest(p<0.05) in CrMet and CuMet supplemented diet treatment. Nutrients digestibility of diets was lowest(p<0.05) in CrMet and CuSO4 supplemented diet treatment, and highest(p<0.05) in CrMet and CuMet supplemented diet treatment. Fecal copper, zinc and chromium excretion was highest(p<0.05) in CrCl3 and CuSO4 supplementation treatment and lowest(p<0.05) in CrMet and CuMet supplementation treatment. This study showed a relatively high degree of utilization of Cr and Cu as well as Zn by supplementation of CrMet and CuMet compared with those of the inorganic sources.