• Metals and materials international
• /
• v.24 no.6
• /
• pp.1309-1314
• /
• 2018

In this study, we investigated the state of $Y_2O_3$, as a major additive element in Fe-based ODS alloys, during mechanical alloying (MA) processes by thermodynamic approaches and experimental verification. For this purpose, we introduced $Ti_2O_3$ that formed different reaction products depending on the state of $Y_2O_3$ into the Fe-based ODS alloys. In addition, the reaction products of $Ti_2O_3$, Y, and $Y_2O_3$ powders were predicted approximately based on their formation enthalpy. The experimental results relating to the formation of Y-based complex oxides revealed that $YTiO_3$ and $Y_2Ti_2O_7$ were formed when $Ti_2O_3$ reacted with Y; in contrast, only $Y_2Ti_2O_7$ was detected during the reaction between $Ti_2O_3$ and $Y_2O_3$. In the alloy of $Fe-Cr-Y_2O_3$ with $Ti_2O_3$, $YTiO_3$ (formed by the reaction of $Ti_2O_3$ with Y) was detected after the MA and heat treatment processes were complete, even though $Y_2O_3$ was present in the system. Using these results, it was proved that $Y_2O_3$ decomposed into monoatomic Y and O during the MA process.

• Journal of Powder Materials
• /
• v.29 no.3
• /
• pp.240-246
• /
• 2022

Novel Ni- and Fe-based alloys are developed to impart improved mechanical properties and corrosion resistance. The designed alloys are manufactured as a powder and deposited on a steel substrate using a high-velocity oxygen-fuel process. The coating layer demonstrates good corrosion resistance, and the thus-formed passive film is beneficial because of the Cr contained in the alloy system. Furthermore, during low-temperature heat treatment, factors that deteriorate the properties and which may arise during high-temperature heat treatment, are avoided. For the heattreated coating layers, the hardness increases by up to 32% and the corrosion resistance improves. The influence of the heat treatment is investigated through various methods and is considered to enhance the mechanical properties and corrosion resistance of the coating layer.

• Physical Therapy Rehabilitation Science
• /
• v.9 no.4
• /
• pp.230-237
• /
• 2020

Objective: To investigate the physical appearance and therapeutic changes that occur with the performance of Schroth exercise in patients with scoliosis. Design: Randomized controlled trial. Methods: Fifteen subjects with maximum curvature of the lumbar who were diagnosed with idiopathic scoliosis had volunteered to participate in the study. Eight subjects were included in the experimental group where they performed the Schroth Therapeutic Exercise and the other seven were included in the control group. The experimental group underwent 2 hours of weekly treatment for 12 weeks, while the control group did not during the same period based on the decisions of patients or guardians. The Mann-Whitney rank test was carried out to compare the treatment results of the two groups, and the comparison within the group was done by Wilcoxon signed-rank test. The vertebral rotation angle (VRA) was by Scoliometer, and difference of rotated and curved portion volume (DV) between both sides on the major curvature portion measured by 3D human body scanning system. Results: In the experimental group, 12 weeks of Schroth exercise therapy has significant improved in correction rate (CR) in Cobb's angle (CA), VRA, and DV between both sides on the major curvature portion (p<0.05), while significant differences were not found between the groups regarding weight bearing difference in both feet (WD) and DV (p<0.05). Conclusions: Schroth exercise performance showed significant changes in the patient's therapeutic changes (CA, VRA), but the physical appearance (DV, WD) was not significant, indicating that external changes in the treatment goal setting are more difficult goals to achieve.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.2
• /
• pp.13-27
• /
• 2021

Stainless steel, which includes Ni and Cr with Fe balance, is most often applied for a wide range of applications such as structure and equipment material. It is not only suitable for use in these applications due to its good corrosion resistance, but also can be applied to catalyst, supporting material, and current collector due to intrinsic properties of Ni and Fe contained in stainless steel. Therefore, in recent years, a lots of surface treatment methods have been studied to activate stainless steel, developing application of water splitting system. In this review paper, the research on the surface treatment technology of stainless steel for water splitting is summarized. It is expected to be able to propose the diverse surface treatment approaches of stainless steel for application to low-cost and highly efficient water splitting electrode.

• Smart Structures and Systems
• /
• v.29 no.2
• /
• pp.267-278
• /
• 2022

Pre-stressed concrete circular spun piles are widely used in various infrastructure projects around the world and offer an economical deep foundation system with consistent and superior quality compared to cast in-situ and other concrete piles. Conventional methods for measuring the lateral response of piles have been limited to conventional instrumentation, such as electrical based gauges and pressure transducers. The problem with existing technology is that the sensors are not able to assist in recording the lateral stiffness changes of the pile which varies along the length depending on the distribution of the flexural moments and appearance of tensile cracks. This paper describes a full-scale bending test of a 1-m diameter spun pile of 30 m long and instrumented using advanced fibre optic distributed sensor, known as Brillouin Optical Time Domain Analysis (BOTDA). Optical fibre sensors were embedded inside the concrete during the manufacturing stage and attached on the concrete surface in order to measure the pile's full-length flexural behaviour under the prescribed serviceability and ultimate limit state. The relationship between moments-deflections and bending moments-curvatures are examined with respect to the lateral forces. Tensile cracks were measured and compared with the peak strains observed from BOTDA data which corroborated very well. By analysing the moment-curvature response of the pile, the structure can be represented by two bending stiffness parameters, namely the pre-yield (EI) and post-yield (EI_cr), where the cracks reduce the stiffness property by 89%. The pile deflection profile can be attained from optical fibre data through closed-form solutions, which generally matched with the displacements recorded by Linear Voltage Displacement Transducers (LVDTs).

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.2_2
• /
• pp.341-347
• /
• 2023

The subway is one of the most common and important means of transportation in modern society. In order to use the subway safely, tracks are necessary, but trains are prone to derailment and collisions. In order for the train to run safely on the track, the fishplate that connects the line connection is used. The damaged railway was a fishplate for connecting subway lines used for 11 years, and damage analysis and countermeasures were presented. Beach marks were observed on both fracture surfaces, and striations appeared at the range of crack propagation. The damaged part is Cr carbide, which has a higher hardness than the base metal, and is judged to be embrittled and destroyed by fatigue. The SM50C fishplate was subjected to a cyclic stress of about 59% of the upper limit of tensile-compression fatigue limit, but inclusions were the cause of failure. In order to prevent fatigue failure of the SM50C steel fishplate, the occurrence of inclusions should be minimized and processed to have a homogeneous structure when manufacturing the fishplate. In addition, compressive residual stress is given through surface modification such as peening to control crack generation. It is necessary to minimize the change in shape that can become a stress concentration part along with accurate fastening of the bolt, and to design the stress distribution to be as uniform as possible.

• Korean small business review
• /
• v.41 no.3
• /
• pp.95-106
• /
• 2019

The Economic Gab-Jil, where the stronger are forcing the weaker to sacrifice, is not only a serious social problem, but also it exhausts the vitality of the national economy. Especially, the issue of 'cost reduction (CR) of delivery price' in automobile industry, and the issue of 'tolls' and 'retaliating' in the franchise business are becoming more controversial. This paper suggests some measures to rectify the problems by an analysis using a game-theoretic model. One of the ways to change the 'bad equilibrium', where economic Gab-Jil is prevalent, to the 'good equiblium' is to strengthen the bargaining power of the weak by legal and institutional measures. It is also a more market-friendly system that is self-enforcing, where the regulation is automatically enforced by the incentives of the participants, without relying solely on the enforcement power of regulatory or supervisory bodies

• Journal of the Korean Electrochemical Society
• /
• v.27 no.1
• /
• pp.8-14
• /
• 2024

Austenitic stainless steel 316L has been used a lot of applications because of its high corrosion resistance and formability. In addition, copper brazing is employed to create complex shape of 316L stainless steel for various engineering parts. In such system, copper-based filler metals make galvanic cell at metal/filler metal interface, and it accelerates corrosion of stainless steel. Furthermore, Cu-rich region formed by diffused copper in austenitic stainless steel can promote a pitting corrosion. In this study, we used an ammonia (NH₃) gas to nitride the 316L stainless steel for improving the corrosion resistance. The thickness of the nitride (nitrogen high) layer increased with the treatment temperature, and the surface hardness also increased. The potentiodynamic polarization test showed the improvement of corrosion resistance of 316L stainless steel by enhancing the passivation on nitride layer. However, in case of high temperature nitriding, a chromium nitride was formed and its fraction increased, so that the corrosion resistance was decreased compared to the intact 316L stainless steel.

• Journal of Animal Environmental Science
• /
• v.10 no.3
• /
• pp.163-168
• /
• 2004

This research was carried out to investigate the moisture evaporation and property change depenging on the composting temperature for the escalator reversing composting system. The system was supported by the Y livestock cooperative composting factory. According to the test, the composting remperature eas varied in the range of $65\~80^{\circ}C$. The water content was de-creased to $75\%$ and became about $60\%$ at the end of the phase. Total nitrogen became $0.58\%$, total phosphoric acid $1.47\%$ and potashium $0.49\%$ at the end of the phase.

• The Korean Journal of Nuclear Medicine
• /
• v.1 no.1
• /
• pp.1-19
• /
• 1967

The effects of X-ray irradiation and the thyroid gland on the erythropoietic system were studied in the white male rabbits. The total body irradiation was done in doses of 250 r and 500 r to each of 5 rabbits for 10days. The factors were 220KV, 10mA, FLI/4 Cu+1 mmAI(HVL:2.0 mm Cu) 50 cm F.S.D. The thyroid dysfunction was experimentally induced, by giving 2mg of thyroid tablets per kg body weight for 15 days in 5 rabbits for hyperthyroidism and by giving 1.5 mC of $^{131}I$ per kg body weight in another 5 rabbits for hypothyroidism. Fourteen healthy rabbits were used as control. The hematologic changes and ferrokinetic data obtained from $^{59}Fe$ and apparent half survival of the red blood cells obtained from $^{51}Cr$ were compared. Following were the results: A. X-ray irradiated group; 1. There were no significant changes in hematologic findings except for leucopenia. A slight decrease of red blood cells was observed in 500 r irradiated animals. 2. The decreases in the iron turnover rates of the plasma and red blood cells as well as in the red cell renewal rate were found in both groups. A :significant decrease of the red cell iron utilization rate was observed in the 500 r irradiated animals. 3. The apparent half survival times of the red blood cells were slightly, in the 250 r ($12.1{\pm}0.80$ days), and markedly shortened in the 500 r irradiated animals ($9.8{\pm}1.38$ days), the normal being $14.0{\pm}1.6$ days. 4. It appears, therefore, that the anemia caused by X-ray irradiation is due to the inhibition of hemopoietic function and the excess destruction of the red blood cells. B. Thyroid dysfunction group; 1. The slight increases of the red blood cell count and circulating blood volume with the normal serum iron level were observed in the hyperthyroid group, while the decreases of the red and white blood cell counts, hemoglobin and hematocrit values with a marked decrease of the serum iron level in the hypothyroid group. 2. A marked decrease of the plasma iron disappearance rate with increases of plasma iron turnover, red cell iron utilization and red cell iron turnover were observed in the hyperthyroid group, while the marked delay and decreases in the hypothyroid group. 3. The apparent half survival times of the red blood cells were almost the same with the control in the hyperthyroid group, ($14.0{\pm}1.58$ while a marked shortening in the hypothyroid group $10.6{\pm}0.30$. 4. It was reconfirmed that the thyroid hormones bear a close relationship with the erythropoietic system, namely, the latter is stimulated by the former. The lack of the thyroid hormones thus induces the bone marrow depression leading to anemia the major cause of which, therefore, is not hemolysis.