• 제목/요약/키워드: COPS3

검색결과 39건 처리시간 0.019초

Silencing of the COPS3 Gene by siRNA Reduces Proliferation of Lung Cancer Cells Most Likely via induction of Cell Cycle Arrest and Apoptosis

  • Wang, Xue-Mei;Cui, Jiu-Wei;Li, Wei;Cai, Lu;Song, Wei;Wang, Guan-Jun
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제13권3호
    • /
    • pp.1043-1048
    • /
    • 2012
  • The COPS3 gene has stimulating effect on cell proliferation and progression of osteosarcomas and related cells. However, the features of COPS3 and its potential application as a therapeutic target in other cancers has not yet been studied. In this study, therefore, the effect of COPS3 silencing via COPS3 siRNA on lung cancer cell proliferation was examined. Expression levels of COPS3 gene in COPS3 siRNA infected cells and control siRNA infected cells were compared with real time PCR and Western blot analysis. Cell proliferation levels were comprehensively analyzed by MTT, BrdU incorporationy, and colony formation assays. For mechanistic assessment the effects of COPS3 silencing on cell cycle and apoptosis were analyzed using flow cytometry. Results showed that successful silencing of the COPS3 gene at both translational and transcriptional levels significantly reduced the proliferation and colony formation by lung cancer cells (p<0.01). Flow cytometry showed cell cycle arrest in the G0/G1 phase after COPS3 silencing, and more importantly, apoptosis was induced as a result of COPS3 knockdown, which negatively affected cell survival. Therefore, these results provide another piece of important evidence that the COPS3 gene expressed in lung cancer cells may play a critical role in stimulating proliferation. Down-regulation of COPS3 could significantly inhibit lung cancer cell growth, which was most likely mediated via induction of cell cycle arrest in G0/G1 phase and apoptosis.

Part 1 : Styrene과 COPS-I의 무유화공중합 (Part 1 : Soap-Free Emulsion Copolymerization of Styrene with COPS-I)

  • 이기창;추헌승;하정미
    • 접착 및 계면
    • /
    • 제15권3호
    • /
    • pp.93-99
    • /
    • 2014
  • 본 Styrene (ST)과 sodium 1-allyloxy-2-hydroxypropane sulfonate (COPS-I)의 무유화 공중합을 다양한 중합조건(ST, COPS-I, KPS, DVB의 농도 및 중합온도)하에서 실시하여, 165~550 nm 입자경 범위의 단분산 라텍스를 제조하였다. 일반적으로 COPS-I와 KPS의 농도, 중합온도, DVB의 농도 등의 변화는 고분자 입자수(입자경), 중합속도, 분자량, 제타전위 등에 밀접한 영향을 미침을 발견하였다. 입자수의 증가는 중합속도와 제타전위를 증가시켰으나 분자량은 감소하였다.

Influence of Cooking, Storage Period, and Re-heating on Production of Cholesterol Oxides in Chicken Meat

  • Choe, Juhui;Min, Joong-Seok;Lee, Sang-Ok;Khan, Muhammad Issa;Yim, Dong Gyun;Lee, Mooha;Jo, Cheorun
    • 한국축산식품학회지
    • /
    • 제38권3호
    • /
    • pp.433-441
    • /
    • 2018
  • The objective of present study was to investigate the effect of cooking and their combinations with re-heating methods on the formation of cholesterol oxidation products (COPs) in stored chicken thigh meat. Pan roasting, steaming, oven grilling, charcoal grilling, and microwaving were used for cooking. Re-heating of samples was done using the same cooking methods or microwaving after 3 and 6 d of refrigerated storage. Cooking and re-heating resulted in reduction of crude fat and cholesterol contents of chicken thigh meat depending on storage period before re-heating. Cooking and storage period had no influence on the total amount of COPs. The highest total amount of COPs was observed in meat samples cooked by steaming and reheated by microwaving after 6 d of storage, which showed similar value to raw chicken meat stored for 6 days. However, different re-heating methods formed different types of COPs depending on storage period before re-heating. The high amount (p<0.05) of 25-hydroxycholesterol or ${\alpha}-epoxide$ was detected in meat samples reheated by steaming or microwaving at 3 or 6 d of storage after steamed cooking, respectively. As a result, the combination of steaming and re-heating with microwaving could increase the total amount of COPs in chicken thigh meat and different cooking/re-heating methods could form different types of COPs, even though no significant difference in the total amount of COPs depending on storage period.

Simultaneous Analysis of Cholesterol Oxidation Products (COPs) in Powdered Milk Using HPLC/UV-Vis

  • Lee, Jin Joo;Myung, Seung-Woon
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권9호
    • /
    • pp.2787-2794
    • /
    • 2013
  • Cholesterol and cholesterol oxidation products (COPs) may accumulate in foods of animal origin during processing or storage. An effective and sensitive analytical method was developed by increasing the UV absorption of compounds through derivatization by attaching a chromophore to the functional groups of cholesterols (cholesterol, 20-hydroxycholesterol, 7-ketocholesterol, cholestane-$3{\beta}$-$5{\alpha}$-$6{\beta}$-triol, 25-hydroxycholesterol, and $5,6{\alpha}$-epoxycholesterol). The influences of the reaction time, volume of reaction solvent, amounts of derivatizing reagent, and extraction solvents were investigated, as they may influence the reaction and extraction yield. The derivatized COPs were analyzed simultaneously on a C18 column (2.1 mm i.d. ${\times}$ 100 mm length, $3.5{\mu}m$ particle size) using a gradient elution with water and acetonitrile. The derivatized COPs showed increased sensitivity and selectivity in HPLC/UV-Vis. The LOD and LOQ were in the concentration ranges of 0.018-0.55 mg/kg and 0.059-1.84 mg/kg from the powdered milk. And the accuracy and precision were 78.1-116.7% and 1.1-9.9%, respectively.

ON THE MINIMUM ORDER OF 4-LAZY COPS-WIN GRAPHS

  • Sim, Kai An;Tan, Ta Sheng;Wong, Kok Bin
    • 대한수학회보
    • /
    • 제55권6호
    • /
    • pp.1667-1690
    • /
    • 2018
  • We consider the minimum order of a graph G with a given lazy cop number $c_L(G)$. Sullivan, Townsend and Werzanski [7] showed that the minimum order of a connected graph with lazy cop number 3 is 9 and $k_3{\square}k_3$ is the unique graph on nine vertices which requires three lazy cops. They conjectured that for a graph G on n vertices with ${\Delta}(G){\geq}n-k^2$, $c_L(G){\leq}k$. We proved that the conjecture is true for k = 4. Furthermore, we showed that the Petersen graph is the unique connected graph G on 10 vertices with ${\Delta}(G){\leq}3$ having lazy cop number 3 and the minimum order of a connected graph with lazy cop number 4 is 16.

Effects of Various Cooking and Re-heating Methods on Cholesterol Oxidation Products of Beef Loin

  • Lee, S.O.;Lim, D.G.;Seol, K.H.;Erwanto, Y.;Lee, M.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제19권5호
    • /
    • pp.756-762
    • /
    • 2006
  • The objective of this study was to define the effects of various cooking and re-heating methods (pan roasting, steaming, oven grilling and micro-waving) on the cholesterol and formation of cholesterol oxidation products in beef loin during storage at $4^{\circ}C$. Raw samples showed lower total cholesterol content than cooked products sampled during storage for 6 d. The following cholesterol oxidation products (COPs) were separated by gas chromatography: $7{\beta}$-hydroxy cholesterol, $20{\alpha}$-hydroxy cholesterol, 25-hydroxy cholesterol, cholestane-$3{\beta}$, $5{\alpha}$, $6{\beta}$ triol (triol), ${\alpha}$-epoxide and 7-ketocholesterol. Total amounts of COPs/cholesterol at 0 d were 0.74, 0.63, 0.76, 1.23 and 0.83% for the raw sample, pan roasting, steaming, oven grilling and micro waving methods, respectively. After 6 d storage almost of the samples had higher content of total COPs than at 0 and 3 d; the lowest (0.55%) COPs was found in the steaming cooking and re-heating method. The highest (5.96%) of COPs was found in the pan roasting cooking and re-heating method after 6 d storage. In conclusion, the concentration of total cholesterol and cholesterol oxidation of beef loin were increased as a consequence of cooking and re-heating methods. Steaming and micro-waving methods showed the lowest of cholesterol oxidation products under refrigerated storage for 6 d. However, each cooking and re-heating method had its own distinctive cooking effects.

운전조건 변화에 따른 이산화탄소 열펌프의 냉난방 성능특성 비교 (Cooling and Heating Performances of a CO2 Heat Pump with the Variations of Operating Conditions)

  • 조홍현;백창현;이응찬;강훈;김용찬
    • 대한기계학회논문집B
    • /
    • 제32권6호
    • /
    • pp.454-462
    • /
    • 2008
  • Since operating conditions are significantly different for heating and cooling mode operations in a $CO_2$ heat pump system, it is difficult to optimize the performance of the $CO_2$ cycle. In addition, the performance of a $CO_2$ heat pump is very sensitive to outdoor temperature and gascooler pressure. In this study, the cooling and heating performances of a variable speed $CO_2$ heat pump with a twin-rotary compressor were measured and analyzed with the variations of EEV opening and compressor frequency. As a result, the cooling and heating COPs were 2.3 and 3.0, respectively, when the EEV opening was 22%. When the optimal EEV openings for heating and cooling were 28% and 16%, the cooling and heating COPs increased by 3.3% and 3.9%, respectively, over the COPs at the EEV opening of 22%. Beside, the heating performance was more sensitive to EEV opening than the cooling performance. As the compressor speed decreased by 5 Hz, the cooling COP increased by 2%, while the heating COP decreased by 8%.

지하수 수위가 개방형 지열시스템 성능에 미치는 영향에 관한 연구 (A Study of the Influence of Groundwater Level on the System Performance of Open Loop Geothermal System)

  • 김진상;남유진
    • 한국지열·수열에너지학회논문집
    • /
    • 제9권3호
    • /
    • pp.1-10
    • /
    • 2013
  • Open loop geothermal heat pumps have great potential where the groundwater resources are sufficient. Performance of open loop geothermal heat pump systems is considered higher than that of ground source heat pumps. Head and power calculation of submersible pumps, heat pump units, and piping are numerically based on regression data. Results shows that the system performance drops as the water level drops, and the lowest flow rates generally achieve the highest system COPs. The highest achievable cooling system COPs become 6.34, 6.12, and 5.95 as the groundwater levels are 5m, 15m, and 25m. The highest heating system COPs also become 4.59, 4.37, and 4.20. Groundwater level and submersible pump selection greatly influence the system performance of open loop geothermal heat pumps. It needs to be analysed during the design process of open loop geothermal heat pump system, possibly with analysis tools that include wide range of pump product data.

가열방법과 포장조건이 칠면조육 패티의 저장중 지방산화와 콜레스테롤 산화물에 미치는 효과 (Effect of Cooking and Packaging Methods on the Thiobarbituric Acid Reactive Substances and Cholesterol Oxidation Products of Turkey Thigh Meat Patties During Storage)

  • 허선진;주선태;박구부;김일석;진상근
    • Journal of Animal Science and Technology
    • /
    • 제46권3호
    • /
    • pp.397-404
    • /
    • 2004
  • 가열방법과 포장방법이 저장기간 동안 칠면조육 패티의 지방산화(TBARS)와 콜레스테롤 산화물 함량에 미치는 효과를 조사하기 위하여, 칠면조 다리육을 분쇄하여 패티를 제조하였다. 칠면조육 패티는 5가지 가열방법(oven cooking, pan frying, deep frying, boiling, microwaving)으로 가열한 후 각각 함기포장과 진공포장한 후 저장하면서 시험에 공시하였다. 지방산패도는 함기포장과 진공포장 모두 저장초기에는 boiling 방법이 유의적으로(P < 0.05) 높게 나타났으나, 저장 말기에는 microwaving 방법이 가장 높은 지방산패도를 나타내었다(P < 0.05). 총 콜레스테롤 산화물의 량은 전 저장기간동안 boiling 방법이 가장 낮은 함량을 나타내었고(P < 0.05), microwaving 방법이 가장 높은 함량을 나타내었다(P < 0.05).각각의 콜레스테롤 산화물의 함량을 보면,7$\alpha$-hydroxycholesterol은 pan frying 방법이 가장 낮은 함량을 나타내었고(P < 0.05), microwaving 방법이 가장 높은 함량을 나타내었다(P < 0.05). $\lpha$-epoxide의 량은 boiling 방법이 가장 낮은 함량을 나타내었으며, pan frying 방법에서 가장 높게 나타났다(P < 0.05). $\beta$-epoxide 함량은 pan frying 방법이 가장 낮은 함량을 나타내었으며(P < 0.05), deep frying 방법과 microwaving 방법에서 가장 높은 함량을 나타내었다(P < 0.05). 또한 7-ketocholesterol의 함량은 microwaving 방법에서 가장 높게 나타났다(P < 0.05).

통신해양기상위성 Ka 통신탑재체 개발 공동 및 용역 개발 참여기관 제품보증 연구 (A study on Sub-contractor Product Assurance for development of Ka band Communication Payload System of COMS)

  • 정철오;이성팔
    • 항공우주시스템공학회지
    • /
    • 제3권1호
    • /
    • pp.6-11
    • /
    • 2009
  • It is anticipated that quality assurance for the Ka band Communication Payload System(COPS) development program of the communication, Ocean & Meteorological Satellite(COMS) may be a core technical factor to be concerned in order to avoid any failure, and to assure its final performance during the mission lifetime in space. Those can be managed and verified and assessed by performing the Quality Assurance (QA) and risk management which helps to prevent and to reduce the critical fails. This paper introduces the Product Assurance (PA) system and procedures for controlling and monitoring sub-contractors which were participated in Ka band Communication Payload System (COPS) development. Also this paper shows Quality Assurance (QA) procedures and detailed their processes for assured the product performed by local companies from site survey for selecting companies to delivery of their equipment.

  • PDF