• 반도체디스플레이기술학회지
• /
• 제4권4호
• /
• pp.27-31
• /
• 2005

This article contains the development of FPC bonder that used for repair or trial product. Nowadays, in FPO module process (including PDP) accept the thermo-compress bonding method when attach FPC(Flexible Printed Circuit Board), TCP(Tape Carrier Package) and COF(Chip on the FPC) by ACF(Anisotropic Conductive Film). This system consists of ACF attachment part, pre-bonding part, main bonding part, loading / unloading part. This composition is a stand-alone system, not an in-line system. Hereafter, this composition should be developing into in-line system in all area of FPD industry.

• 제어로봇시스템학회논문지
• /
• 제16권2호
• /
• pp.172-176
• /
• 2010

Recently, LCD (Liquid Crystal Display) requires various technical challenges; high definition, high quality, big size, and low price. These demands more pixels in the fixed area of the LCD and very fine lead pitch of the driving IC which controls the pixels. Therefore, a new packaging technology is needed to meet such technical requirement. NCP (Non Conductive Paste) is one of the new packaging methods and has excellent characteristics to overcome the problems of the ACF (Anisotropic Conductive Film). In this paper, we analyzed the process of the NCP for COF (Chip on FPCB) and proposed the key design parameters of the NCP process. Through a series of experiments, we obtained the stable values of the design parameters for successful NCP process.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2004년도 춘계학술대회 발표 논문집
• /
• pp.101-107
• /
• 2004

각종 전자기기의 소형화, 고성능화 요구에 따라 회로 또는 기판의 고집적화에 따른 대안으로 도입된 COF(Chip On Film)공정에서 PI(polyimide)/buffer layer/Cu의 접착력 개선을 목적으로 본 연구가 진행 되었다. 그리고 buffer layer로써 Cr을 증착 할 때 부착력의 개선을 목적으로 개질처리를 할 때는 RF plasma장비를 사용하였다. 실험 변수로는 peel strength에 대한 buffer layer의 종류와 증착시간, 표면 개질처리시 $O_2$/Ar비이다. Buffer layer의 종류에 따른 접착력은 Cr보다 Ni이 우수하였고 peel strength와 Cu THK는 같은 buffer layer의 증착 structure에서 비례 관계를 나타냈으며, Cr의 증착 시간과 Cu의 증착 시간을 변수로 peel strength test한 값은 Cr증착시간이 30초, Cu증착시간이 20분일때 40g/mm로 최적의 접착력이 나타났다. 증착전 PI의 개질 처리시 $O_2$/Ar 유량비에 따른 peel strength값은 $O_2$/Ar유량비가 증가 할수록 향상되었으며, 2/5에서 최고값인 58g/mm가 나타났다. 그 이상에서는 오히려 감소하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.113.2-113.2
• /
• 2010

We report that the novel covalent organic frameworks (COFs) are capable of reversibly providing an extremely high uptake capacity of carbon dioxide and hydrogen at room temperature. These COFs are designed based on the multiscale simulations approach via the combination of ab initio calculations and force-field calculations. For this goal, we explore the adsorption sites of carbon dioxide and hydrogen on COFs, their porosity, as well as carbon dioxide adsorption isotherms. We identify the binding sites and energies of $CO_2$ on COFs using ab initio calculations and obtain the carbon dioxide adsorption isotherms using grand canonical ensemble Monte Carlo calculations. Moreover, the calculated adsorption isotherms are compared with the experimental values in order to build the reference model in describing the interactions between the $CO_2/H_2$ and the COFs and in predicting the $CO_2$ and $H_2$ adsorption isotherms of COFs. Finally, we design three new COFs, 2D COF-05, 3D COF-05 (ctn), and 3D COF-05 (bor), for the high capacity $CO_2/H_2$ and $H_2$ storage.

• 한국운동역학회지
• /
• 제23권4호
• /
• pp.377-385
• /
• 2013

Fall is very fatal accident causes death to older people. Shoe may affect to fall. Shoe influences risk of slips, trips, and falls by altering somatosensory feedback to the foot. The purpose of this study was to investigate the analysis of non-slip shoes for older people and influence on older people's lower extremity. For this study twenty three healthy older people were recruited. Each subjects walked over slippery surfaces (COF 0.08). Four pairs of non-slip shoes (shoe A had the greatest COF, 0.23 while shoe B, C, and D had smaller COF relatively) for older people were selected and tested mechanical and biomechanical experiment. For data collection motion capture and ground reaction forces were synchronized. There were statistically significant differences for slip-displacement, coefficient of friction, braking force, propulsion force, knee range of motion and knee joint stiffness by shoes. It was concluded that shoe A was the best for non-slip function because of the lowest slip displacement, the highest braking and propulsion forces, and the highest mechanical and biomechanical coefficient of friction where as shoe B, C, D were identified as a negative effect on the knee joint than shoe A. To prevent fall and slip, older people have to take a appropriate non-slip shoes such as shoe A.

• 마이크로전자및패키징학회지
• /
• 제13권2호
• /
• pp.9-13
• /
• 2006

COF에 사용되는 구리배선은 폴리이미드 필름에 subtractive 방법을 이용하여 만들어지고 있으나 선폭이 작아짐에 따라 subtractive 방법은 폭방향으로 에칭 현상으로 인하여 사용에 제한이 되고 있다. Semi-additive 방법은 리소그래피 공정과 전기도금범을 사용하여 구리배선을 만드는 방법으로 $10-40{\mu}m$의 좁은 선폭에 대한 연구를 하였다. AZ4620과 PMER900의 두꺼운 PR을 사용하였으며 전기도금법을 이용하여 구리 배선을 형성하였다. 기존의 용액은 높은 잔류응력으로 인하여 구리도금층에 crack이 발생하였으며 via filling에 사용된 도금액을 사용한 경우 잔류응력이 낮아서 crack이 없는 구리배선을 얻을 수 있었다. 기지층의 에칭시 배선의 폭방향으로의 에칭 현상은 관찰되지 않았다.

• 대한기계학회논문집A
• /
• 제37권10호
• /
• pp.1291-1296
• /
• 2013

위험도 평가 기술은 주로 플랜트의 많은 운영설비 중 대형사고나 피해를 유발할 수 있는 위험설비를 선별하는 목적으로 개발되었다. 설비의 위험도를 평가하여 위험도의 크기에 따라 순위를 정하고 이 순위를 기준으로 정비자원을 투입하는 순서나 정비작업의 시급성을 판단한다. 위험도란 고장이 발생할 확률과 고장이 발생할 경우에 수반되는 파손피해의 곱으로 정의된다. 위험도 평가방법으로는 간단한 손상 및 고장 평가기법을 이용하여 기본적인 고장확률 데이터를 확보하고 정성적인 문진을 통해 이를 보완하는 준 정량적 방법이 많이 사용되고 있다. 본 논문에서는 준 정략적 평가를 이용하여 석탄화력발전소의 보일러설비에 대한 위험도 평가를 수행하고 이를 기반으로 설비 별차기 정비주기를 선정하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제5권3호
• /
• pp.455-459
• /
• 1992

Five type of formulated diet from agricultural by-products (ABP) were fed to four breedtype of cattle in feedlot. The ABP used are palm kernel cake (PKC), palm press fibre (PPF), palm oil mill effluent (POME), cocoa pod (COP), coffee pulp (COF) and pineapple waste (PAP). The formulated diets are PS (52% PKC, 15% PPF and 30% POME), PF (57% PKC, 20% PPF and 20% POME), PA (2% PKC and 55% PAP), CO (42% PKC and 55% COP) and CF (67% PKC and 30% COF) with 1% urea, 1% NaCl and 1% vitamins premix. The cattle breedtypes are Kedah-Kelantan (KK), Brahman-KK (BK), Hereford-KK (HK) and Sahiwal-Friesian (SF). The result showed that breedtype significantly affect all the carcass characteristic except dressing percentage. Each breedtype has it's specific carcass characteristics. HK cattle gave high marbling, BK has high % of carcass bone, KK has high % of carcass meat and low % of carcass fat (lean meat type) and SF has high % of carcass fat. Diet-type significantly affect the deposition of fat in the carcass. High moisture diets (PA and CO) produced significantly higher % carcass bone, the lowest % carcass fat and the highest % carcass meat (65.3%). PF, CF, PA and CO diets produced 63.4%, 59.9%, 55.3% and 54.1% carcass meat respectively.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.135-138
• /
• 2002

The purpose of this study is to investigate the lubricated wear properties of Saffil/Al, Saffil/$Al_2O_3/Al$ and Saffil/SiC/Al hybrid metal matrix composites fabricated by squeeze casting method. Wear tests were done on a pin-on-disk friction & wear tester with long sliding distance. The wear properties of the three composites were evaluated in many respects. The effects of Saffil, $Al_2O_3$ particles and SiC particles on the wear behavior of the composites under lubricated conditions were elucidated. Wear mechanisms were analyzed by observing the worn surfaces of the composites. The variation of coefficient of friction (COF) during the wear process was recorded by using a computer. Comparing with the dry sliding condition, all three composites showed excellent wear resistance when lubricated by liquid paraffin. Under intermediate load, Saffil/Al showed best wear resistance among them, and its COF value is the smallest. The dominant wear mechanism of the composites was microploughing, but microcracking also occurred for them to different extent.

• 한국세라믹학회지
• /
• 제40권1호
• /
• pp.104-108
• /
• 2003

스크래칭 시험(scratching test)을 이용하여 단결정 실리콘의 수직하중에 대한 마찰계수, AE(Acoustic Emission) 신호와 긁힌 자취의 미세균열을 관찰하고 그 결정구조를 분석하였다. 스크래칭 시험은 하중인가속도(loading rate)를 100N/min으로 하고 스크래칭 속도(scratching speed)를 1, 3, 6, 10mm/min의 4가지로 하여 최대 30N이 될 때까지 행하였다. 그 결과, 수직하중 또는 스크래칭 속도가 증가할 때 마찰계수, AE, 균열밀도는 증가하는 경향을 나타내었다. 스크래칭, 자취에 대한 마이크로 라만 분광법을 이용한 결정구조 분석결과, 스크래칭 속도가 느린 조건에서 압력인가에 따른 실리콘의 다이아몬드 구조에서 다른 고압상의 구조로의 상전이 현상을 관찰할 수 있었다.