• 한국의학물리학회지:의학물리
• /
• 제14권1호
• /
• pp.1-7
• /
• 2003

본 연구에서는 팬텀에 인가된 강한 자기장에서 전자선에 대한 선량분포 계산을 위하여 EGS4 제어코드를 개발하였다. 이를 위하여 먼저 자기장에서 전자의 운동을 고찰하고 전자의 방향변화에 관한 수학적 결과를 EGS4 제어코드에 삽입하였다. 개발된 코드를 이용하여 6 MeV 전자선에 대하여 세로자기장 1-3T가 인가된 물팬텀 속에서 팬슬빔 전자들의 경로를 계산하였고 0.6-1 T가 인가된 물팬텀 속에서 직경 1cm의 조사면의 깊이선량율과 빔측면도를 계산하였다. 전자의 경로추적 계산결과 3 T의 자기장에서 전자들의 측면변위가 현저히 감소하는 것으로 나타났다. 직경 1 cm 전자선에 대한 깊이선량율은 비정근처에서 자기장의 세기에 따라 미소한 증가를 보였으며, 반음영은 1 T에서 약 0.15 cm 감소가 나타났다. 선량분포의 변화에 관한 계산결과들은 모두 이론적 해석이 가능하였으며 이로부터 본 계산코드의 신뢰성을 평가할 수 있었다.

• Journal of Preventive Medicine and Public Health
• /
• 제56권4호
• /
• pp.312-318
• /
• 2023

Objectives: We reviewed the operational definitions of colorectal cancer (CRC) from studies using the Korean National Health Insurance Service (NHIS) and compared CRC incidence derived from the commonly used operational definitions in the literature with the statistics reported by the Korea Central Cancer Registry (KCCR). Methods: We searched the MEDLINE and KoreaMed databases to identify studies containing operational definitions of CRC, published until January 15, 2021. All pertinent data concerning the study period, the utilized database, and the outcome variable were extracted. Within the NHIS-National Sample Cohort, age-standardized incidence rates (ASRs) of CRC were calculated for each operational definition found in the literature between 2005 and 2019. These rates were then compared with ASRs from the KCCR. Results: From the 62 eligible studies, 9 operational definitions for CRC were identified. The most commonly used operational definition was "C18-C20" (n=20), followed by "C18-C20 with claim code for treatment" (n=3) and "C18-C20 with V193 (code for registered cancer patients' payment deduction)" (n=3). The ASRs reported using these operational definitions were lower than the ASRs from KCCR, except for "C18-C20 used as the main diagnosis." The smallest difference in ASRs was observed for "C18-C20," followed by "C18-C20 with V193," and "C18-C20 with claim code for hospitalization or code for treatment." Conclusions: In defining CRC patients utilizing the NHIS database, the ASR derived through the operational definition of "C18-C20 as the main diagnosis" was comparable to the ASR from the KCCR. Depending on the study hypothesis, operational definitions using treatment codes may be utilized.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.81-84
• /
• 2001

Some trials to simulate the spinning process by which V-belt pulley is usually being manufactured are done in this study. 2D finite element analysis (FEA) for the whole process to produce a mono-typed pulley including preforming, 1st spinning, axial compression and 2nd spinning processes is carried out using the commercial code $DEFORM2D^{TM}$. The sectional shape after each process is compared with that of real product. The deformed shape obtained from the FEA, on the whole, coincides with the experimental result well, but the thickness around the bottom of the V-groove is somewhat different each other.

• Journal of Astronomy and Space Sciences
• /
• 제27권2호
• /
• pp.81-88
• /
• 2010

A total of 583 observations (193 in ${\Delta}b$, 190 in ${\Delta}v$, 200 in ${\Delta}r$) for V523 Cas was made on 9 nights from September to December in 2008 using the 100 cm telescope with 2K CCD camera of the Chungbuk National University Observatory. With our data BVR light curves were constructed and 9 times of minimum light were determined. We also obtained physical parameters of the V523 Cas system by analysis of the BVR light curves using the Wilson-Devinney code.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.327-332
• /
• 2008

For the cracked component under combined primary and secondary stress, an interacion between the loads occurs and the secondary stress is relaxed by the primary load. To account for this phenomena, R6 code provides the correction factor which is called V-factor. However, evaluation corrected with V-factor need to be examined for its conservatism. In this paper the conservatism of the current V-factor is examined for the circumferentially cracked pipe under the combined load and new evaluation method is proposed to reduce the conservatism.

• ETRI Journal
• /
• 제37권5호
• /
• pp.972-978
• /
• 2015

This paper proposes an accurate tunable-gain 1/x circuit. The output voltage of the 1/x circuit is generated by using a capacitor charging time that is inversely proportional to the input voltage. The output voltage is independent of the process parameters, because the output voltage depends on the ratios of the capacitors, resistors, and current mirrors. The voltage gain of the 1/x circuit is tuned by a 10-bit digital code. The 1/x circuit was fabricated using a $0.18{\mu}m$ CMOS process. Its core area is $0.011mm^2$ ($144{\mu}m{\times}78{\mu}m$), and it consumes $278{\mu}W$ at $V_{DD}=1.8V$ and $f_{CLK}=1MHz$. Its error is within 1.7% at $V_{IN}=0.05V$ to 1 V.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.309-310
• /
• 2012

Modeling of biodiesel combustion on compression ignition engine was conducted by using the KIVA3v-Release 2 code coupled with Chemkin chemistry solver2. In order to calculate the chemical kinetics of combustion of biodiesel, a reduced mechanism of methyl decanoate and methyl 9-decanoate was used. It is composed of 123 species and 394 reactions. Also, the experiments were performed on a single-cylinder engine. The simulation results agreed well with experiments results. And soot concentrations of biodiesel were lower than those of diesel.

• 대한수학회논문집
• /
• 제28권1호
• /
• pp.123-134
• /
• 2013

Operational techniques have drawn the attention of several researchers in the study of sequence of functions and polynomials. An attempt is made to introduce a new sequence of functions by using operational techniques. Some generating relations and finite summation formulae have been obtained. The corresponding MAPLE code for obtaining above sequence of functions for different values of parameters was also discussed.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.105-106
• /
• 2012

This study is numerical analysis about optimal conditions of GDICI (gasoline direct injection compression ignition) engine operation using intake preheating. Numerical modeling was performed by using the KIVA-3V Release2 code integrated Chemkin chemistry solver II. For validation of numerical model, experiments were performed on a single-cylinder engine. Throughout the numerical simulations under variable conditions, the ranges of optimal conditions were found.

• Nuclear Engineering and Technology
• /
• 제56권6호
• /
• pp.2163-2173
• /
• 2024

This study introduces a transient analysis module developed for RAST-V and validates it using the Kalinin-3 benchmark problem. For the benchmark analysis, RAST-V standalone and STREAM/RAST-V calculations were performed. STREAM supplies the few-group constants and RAST-V conducts a 3D core simulation utilizing few-group cross-sectional data. To improve accuracy, the main solver was developed based on the advanced semi-analytic nodal method. To evaluate the computational capability of the transient analysis module in RAST-V, Kalinin-3 benchmark is employed. Kalinin-3 represents a coolant transient benchmark that offers experimental data during the deactivation of the Main Circulation Pumps. Consequently, the transient calculations reflected the changes in the reactor flow rate. Benchmark comprising steady-state and transient calculations. During the steady state, the STREAM/RAST-V combination demonstrated a 30 ppm root mean square difference from 0 to 128.50 EFPD. For the transient calculations, STREAM/RAST-V showed power differences within ±7 % over a range of 0-300 s. Axial offset differences were within ±3 %, and the RMS difference in radial power ranged within 2.596 % at both 0 and 300 s. Overall, this study effectively demonstrated the newly developed transient solver in RAST-V and validated it using the Kalinin-3 benchmark problem.