• Korean Journal of Materials Research
• /
• v.8 no.10
• /
• pp.912-917
• /
• 1998

화학적 산화막(SiOx)이 형성된 Si(100)기판 위에 Co-silicide의 형성과 계면 형상에 관한 연구를 하였다. 화학적 산화막은 과산화수소수(H2O2)의 인위적 처리에 의해 약 2nm을 형성시켰다. 그 위에 5nm 두께의 Co 박막을 전자빔 증착기에 의해 증착시킨 후 열처리하여 Co-silicide를 형성하였다. 화학적 산화막 위에서 Co-silicide 반응기구를 알아 보기 위해 $500^{\circ}C$-$900^{\circ}C$의 온도 범위에서 ex-situ와 in-situ 열처리를 하였다. 이와같이 형성된 Co-silicide 시편의 상형성, 표면 및 계면 형상, 그리고 화학적 조성을 XRD, SEM, TEM, 그리고 AES를 이용하여 분석하였다. 분석 결과 es-situ 열처리시 $700^{\circ}C$까지 CoSi2 상은 형성되지 않았고 Co의 응집화현상이 일어났다. $800^{\circ}C$ 열처리한 경우에는 CoSI2가 형성되었고 facet 현상이 크게 나타났으며 불연속적인 grain 들이 형성되었다. In-situ 열처리한 경우에는 저온에서 ($550 ^{\circ}C$)반응하여 Co-silicide가 형성되기 시작하였으며 $600^{\circ}C$부터는 facet에 의해 박막의 특성이 나빠지기 시작했다. $550^{\circ}C$에서 Co가 화학적 산화막 층을 통해 확산하여 균질한 Co-silicide를 형성하였다. 이와같이 형성된 균질한 실리사이드 층을 이용하여 다단계(55$0^{\circ}C$-$650^{\circ}C$-$800^{\circ}C$)열처리에 의해 균질한 다결정 CoSI2의 형성이 관찰되었다.

• Journal of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.22-29
• /
• 1988

The reaction of methanol-water mixture to $CO_2$ and $H_2$ on alkaline earth metal-copper-zinc oxide has been studied in the temperature range of 150 ${\sim}\;300^{\circ}C$. Generally the addition of the alkaline earth metal to Cu/ZnO resulted in an enhancement of selectivity for $CO_2$ formation and a reduction of catalytic activity. Measurable activities were found from 150$^{\circ}C$, 200$^{\circ}C$, and 250$^{\circ}C$ on Mg/Cu/ZnO, Ca/Cu/ZnO, and Ba/Cu/ZnO respectively. However, the highest selectivity for $CO_2$ formation was observed in Ba/Cu/ZnO catalyst at 250$^{\circ}C$. The effect of alkaline earth metal or ZnO on the reactivity was investigated using temperature programmed desorption of $CO_2$ or temperature programmed reduction with $H_2$ over catalysts respectively. It was found that $CO_2$ interacts more strongly in the sequence of MgO < CaO < BaO and ZnO decereases the reduction temperature of CuO. From the results, it was suggested that ZnO activates $H_2$ in the redox process of Cu component and alkaline earth metals adsorbs $CO_2$ in the catalytic process.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.602-609
• /
• 1997

The seed formation and growth of $\alpha$-ferric oxyhydroxide with aerial oxidative precipitation from aqueous solution of ferrous sulfate with KOH, NaOH, $Na_2CO_3$ and $K_2CO_3$ as precipitants have been studied by free pH drift experiment. It has been shown that all precipitants give same particle formation and growth path, and average particle length from KOH and NaOH as precipitants was about 1.5 times shorter than that of $K_2CO_3$ and $Na_2CO_3$. When initial mole ratio, $R_o=[Fe^{2+}]_o/[OH^-]_o$ of KOH was decreased the particle was grown oxyhydroxide seed growth from aqueous solution of ferrous sulfate with KOH has been studied. The influence of the air flow rate, reaction temperature and initial mole ratio, $R_o=[Fe^{2+}]_o/[OH^-]_o$, on the kinetics of seed growth are investigated by static pH experiment. The oxidation rate of seed growth increased with increase in the air low rate, reaction temperature and initial mole patio. The activation energy of seed growth is 16.16 KJ/mol and the rate equation of seed growth can be written as follows: $-\frac{d[Fe^{2+}]}{dt}=1.46{\times}10^4[P_{o2}]^{0.66}[OH^-]^{2.19}exp(-\frac{16.16}{dt})$.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2007.05a
• /
• pp.526-529
• /
• 2007

본 연구에서는 일정선량(600kGy)에서 전자빔 에너지(0.7, 1, 2 MeV)를 달리하여 조사한 $Ni/g-Al_2O_3$ 촉매를 이용하여 세 가지 다른 종류의 합성가스 전환반응(메탄의 이산화탄소 개질반응, 메탄의 수증기 개질반응, 메탄의 부분산화반응)을 수행하였다. 전자빔 조사는 He 분위기, 실온에서 수행하였으며, 조사된 촉매의 표면상태 변화를 살펴보기 위하여 XRD, XPS 분석을 수행하였다. 고에너지 전자빔 처리된 $Ni/g-Al_2O_3$ 촉매의 표면 특성분석 결과 촉매 표면의 Ni종은 metallic Ni, NiO, $NiAl_2O_4$의 3가지 상태로 존재함을 알 수 있었으며, 전자빔 에너지 증가에 따라 촉매 표면의 전체적인 Ni 함량과 촉매 표면의 Ni 분산도를 나타내는 Ni/Al ratio가 증가하였다. 또한, 전자빔 에너지 증가에 따라 Ni에 결합된 산소가 더 크게 감소되어 표면에서 산소 vacancy가 증가하는 결과를 가져왔으며, 이는 결국 세 가지 Ni의 상태 중 metallic Ni과 $NiAl_2O_4$를 증가시켰다. 이러한 결과들은 메탄의 이산화탄소 개질 반응과 메탄의 수증기 개질반응에서 반응물($CH_4$, $CO_2$)의 전환율과 생성물(CO, $H_2$)의 수득율을 증가시켰으며 메탄의 부분산화반응은 반응의 특성상 메탄의 전환율은 증가하나 생성물인 CO, $H_2$는 오히려 감소하는 결과를 가져옴을 알 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.4
• /
• pp.405-413
• /
• 2013

The char oxidation characteristics of high ash coal were experimentally investigated at several temperatures (from 900 to $1300^{\circ}C$) for 4 types of coals (Gunvor, Glencore, Noble, and ECM) under atmospheric pressure in a drop tube furnace (DTF). The char reaction rate was calculated from the exhaust gas concentrations (CO and $CO_2$) using FT-IR, and the particle temperature was measured using the two-color method. In addition, the activation energy and pre-exponential factor for high ash coal char were calculated based on the Arrhenius equation. The results show that as the ash content increases, the particle temperature and area reactivity decreases. This is because in high ash coal, the large heat capacity of the ash, ash vaporization, and relatively low fixed carbon content of ash suppress combustibility during char oxidation. As a result, the higher ash content of coal leads to high activation energy.

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.657-662
• /
• 2002

The reduced ferrites, reduced NiF $e_2$ $O_4$ and CuF $e_2$ $O_4$, by C $H_4$ were applied to $CO_2$ decomposition to avoid the greenhouse effects. At the reduction reaction above $700^{\circ}C$, $H_2$ and CO were generated by partial oxidation of C $H_4$ After the reduction reaction up to 80$0^{\circ}C$, the spinel structure ferrites changed to mixture of the oxygen deficient iron oxide (Fe $O_{(1-{\delta})}$(0$\leq$$\delta$$\leq$1)) and the metallic Ni or Cu. The rate and quantity of $CO_2$ decomposition with reduced CuF $e_2$ $O_4$ were larger than those with reduced NiFe $O_4$. The $CO_2$ gas was decomposed by oxidation of the oxygen deficient iron oxide. The metallic Cu and Ni were not oxidized and remained in a metallic state up to 80$0^{\circ}C$. The $CO_2$ decomposition reaction with the reduced ferrite by C $H_4$ gas is excellent process preparing useful gas such as $H_2$and CO and decomposing $CO_2$ gas.

• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.54-63
• /
• 2007

Even traces of CO in the hydrogen-rich feed gas to proton exchange membrane fuel cells (PEMFC) poison the platinum anode electrode and dramatically decrease the power output. In this work, a variety of catalytic materials consisting of $Cu/Ce_xZr_{1-x}O_2$, (x = 0.0-1.0) were synthesised, characterized and tested for CO oxidation and preferential oxidation of CO (PROX). These catalysts prepared by hydrothermal and deposition-precipitation methods. The catalysts were characterized by XRD, XRF, SEM, BET, $N_2O$ titration and oxygen storage capacity (OSC) measurement. The effects of composition of the support and degree of excess oxygen were investigated fur activity and $CO_2$ selectivity with different temperatures. The composition of the support markedly influenced the PROX activity. Among the various $Cu/Ce_xZr_{1-x}O_2$ catalysts having different composition, $Cu/Ce_{0.9}Zr_{0.1}O_2$ and $Cu/Ce_{0.7}Zr_{0.3}O_2$ showed the highest activities (>99%) and selectivities (ca.50%) in the temperature range of $150{\sim}160^{\circ}C$. It was found that by using of $Ce_xZr_{1-x}O_2$ mixed oxide support which possesses a high oxygen storage capacity, oxidation-reduction activity of Cu-based catalyst was improved, which resulted in the increase of catalytic activity and selectivity of CO oxidation in excess $H_2$ environments.

• Clean Technology
• /
• v.8 no.1
• /
• pp.53-59
• /
• 2002

$Cu-CeO_2$ catalysts were prepared by co-precipitation and liquid phase oxidation (CP-LPO) and the prepared catalysts were examined as selective oxidation of carbon monoxide catalysts for the application of fuel cell vehicles. The prepared $Cu-CeO_2$ catalysts showed high reaction activity, but it was hard to find the correlation between the amount of Cu loaded and the reaction activities. As increase of the amount of Cu loaded, the micro pore structure of the catalyst was changed. It is due to the formation of solid solution between Cu and $CeO_2$. During pretreatment, the catalyst formed the solid-solution of Cu-Ce-O, resulting in the improvement of catalytic activity.

• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.328-332
• /
• 2010

In this study, porous ZnO sphere and Cu-ZnO composite were synthesized by coprecipitation method in diethylene glycol solvent. The physicochemical properties of as-prepared composite materials were characterized by SEM, XRD, $N_2$-sorption and $H_2$-TPR. A series of porous Cu-ZnO with different Cu contents (0, 6.6, 21.3, 36.4, 54.6, 77.8 wt%) was investigated for CO oxidation activity in a fixed bed reactor system. With increasing Cu content in Cu-ZnO the surface area and micropore volume of Cu-ZnO are decreased and Cu (36.4 wt%)-ZnO shows higher activity for CO oxidation compared to the others.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.843-849
• /
• 2012

When we use NiO based particle as an oxygen carrier in a chemical looping combustion system, the fuel conversion and the $CO_2$ selectivity decreased with increasing reaction temperature within high temperature range (> $900^{\circ}C$) due to the increment of exhaust CO concentration from reduction reactor. To improve reduction reactivity at high temperature, the applicable metal oxide component was selected by calculation of the equilibrium CO concentration of metal oxide components. After that, feasibility of reduction reactivity improvement at high temperature was checked by using solid mixture of the selected metal oxide particle and NiO based oxygen carrier. The reactivity was measured and investigated using batch type fluidized bed. The solid mixture of $Co_3O_4/CoAl_2O_4$(10%) and OCN706-1100(90%) showed higher fuel conversion, higher $CO_2$ selectivity and lower CO concentration than OCN706-1100(100%) cases. Consequently, we could conclude that improvement of reduction reactivity at high temperature range by adding some $Co_3O_4$ based oxygen carrier was feasible.