• 제목/요약/키워드: CO2

검색결과 5,065건 처리시간 0.039초

고 CO2농도 기체조성으로 자동제어된 용기에 저장된 삼겹살의 품질특성 (Quality Characteristics of Pork Belly Meat Stored in a Container Automatically Controlled under High CO2 Atmosphere)

  • 정수연;이동선;안덕순
    • 한국포장학회지
    • /
    • 제28권3호
    • /
    • pp.217-221
    • /
    • 2022
  • 저온에서 신선육을 보관 저장하는 용기의 기체조성을 고CO2/저O2 농도로 자동적으로 제어하는 용기 시스템을 제작하고, 0℃에서 21일간 돼지고기 삼겹살을 담아 저장하면서 품질보전의 측면에서 진공 포장과 함기 대조구 조건과 비교하였다. CO2 주입 시간 프로그램에 의하여 CO2 농도는 47~60%, O2 농도는 7~10%로 유지될 수 있었고, 이는 호기적 세균 증식과 pH 증가의 억제의 효과와 함께 관능적 품질유지에 기여하였다. 진공포장은 함기 대조구에 비하여 낮은 미생물 성장과 pH 증가를 보여주었으나 높은 drip 손실의 단점을 보였다. 전체적 품질보존의 측면에서 고안된 고CO2 치환 용기는 육류의 품질유지에 효과적이며, 육류의 종류와 특성에 맞게 기체 농도 조건을 변경하여 활용범위를 확장할 수 있을 것이다.

CO2 양생을 이용한 시멘트계 재료의 압축강도 발현에 관한 실험적 연구 (The experimental study on the compressive strength for cementitious material using CO2 curing)

  • 성명진;류화성;신상헌;이한승
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2014년도 춘계 학술논문 발표대회
    • /
    • pp.264-265
    • /
    • 2014
  • Currently, CO2 existed in the air usually reacts concrete, and then CaCO3 can be appeared. As time goes by, pH of concrete is decreased and corrosion of steel can be happened. This phenomenon is called carbonation. For preventing carbonation of concrete, various methods like using corrosion inhibitor, high compressive strength concrete, and enough covering depth are adopted. But these method are usually passive methods focused on corrosion of steel and have limitation on economic. Thus, as basic study for active method of carbonation, cement pastes with CO2 reactive material (γ-C2S, MgO) and GBFS were in accelerated carbonation, and the compressive strengths were measured. On the result, the compressive strength was improved better than non-carbonation. Through measuring the weight change using TG-DTA, as specimens were carbonated, according to decreasing of Ca(OH)2 and Mg(OH)2, CaCO3 and MgCO3 were increased. Therefore it can be shown that carbonation curing can be realized.

  • PDF

CO2 고부가화를 위한 로도박터 스페로이데스를 활용한 미생물 전기합성 최적화 연구 (Optimization of Microbial Electrosynthesis Using Rhodobacter sphaeroides for CO2 Upcycling)

  • 김희수;정휘종;김단비;이상민;이지예;이진석;문명훈;고창현;이수연
    • 신재생에너지
    • /
    • 제19권4호
    • /
    • pp.20-26
    • /
    • 2023
  • Emitted CO2 is an attractive material for microbial electrochemical CO2 reduction. Microbial electrochemical CO2 reduction (i.e., microbial electrosynthesis, MES) using biocatalysts has advantages compared to conventional CO2 reduction using electrocatalysts. However, MES has several challenges, including electrode performance, biocatalysts, and reactor optimization. In this study, an MES system was investigated for optimizing reactor types, counter electrode materials, and CO2-converting microorganisms to achieve effective CO2 upcycling. In autotrophic cultivation (supplementation of CO2 and H2), CO2 consumption of Rhodobacter sphaeroides was observed to be four times higher than that with heterotrophic cultivation (supplementation of succinic acid). The bacterial growth in an MES reactor with a single-chambered shape was two times higher than that with a double chamber (H-type MES reactor). Moreover, a single-chambered MES reactor equipped with titanium mesh as the counter electrode (anode) showed markedly increased current density in the graphite felt as a working electrode (cathode) compared to that with a graphite felt counter electrode (anode). These results demonstrate that the optimized conditions of a single chamber and titanium mesh for the counter electrode have a positive effect on microbial electrochemical CO2 reduction.

Molecular Motions of [N(C2H5)4]+ and [N(CH3)4]+ ions by 1H Nuclear Magnetic Resonance Relaxation in [N(C2H5)4]2CoCl4 and [N(CH3)4]2CoCl4 Single Crystals

  • Yoon, Su-A;Lim, Ae-Ran
    • 한국자기공명학회논문지
    • /
    • 제15권2호
    • /
    • pp.146-156
    • /
    • 2011
  • The line widths and spin-lattice relaxation times of protons in $[N(C_2H_5)_4]_2CoCl_4$ and $[N(CH_3)_4]_2CoCl_4$ single crystals were investigated in the temperature range 160-400 K. The temperature dependences of the spin-lattice relaxation times are attributed to the molecular motions of the ethyl and methyl groups in the $[N(C_2H_5)_4]^+$ and $[N(CH_3)_4]^+$ ions respectively. The NMR line widths indicate that the ethyl groups in $[N(C_2H_5)_4]_2CoCl_4$ have one more degree of freedom than the methyl groups in $[N(CH_3)_4]_2CoCl_4$. The experimental results are interpreted in terms of the reorientations of the methyl and ethyl groups.

IMO의 선박기인 CO2 배출 규제 동향 및 고찰 (Recent International Development on the Technical and Operational Measures of IMO's CO2 Emission Control From Ships)

  • 정노택
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제14권1호
    • /
    • pp.65-71
    • /
    • 2011
  • 국제해사기구의 해양환경보호위원회에서 CO2 배출량 감축의 지구적 노력에 동참하기 위해 최근 선박에서 대기로 방출하는 CO2의 양을 지수화 하고자 하는 논의가 활발히 진행중이다. 그 대표적인 지수로서 신조선 설계 건조시에 적용하는 에너지 효율지수(EEDI : Energy Efficiency Design Index for new ships)와 현재 또는 건조 후 항행시에 운항선에 적용되는 에너지 효율지표(EEOI : Energy Efficiency Operational Indicator), 그리고 운항선의 에너지 효율관리 계획(SEEMP : Ship Energy Efficiency Management Plan)등이다. 본 지수는 선박을 설계 건조시부터 각 선박당 CO2의 배출값을 산정하고 운항시에도 CO2배출을 개량하고 이를 감축하는 방안을 모색하도록 유도하는 조치가 될 것이다. 향후 3년내에 발효될 수 있는 임박한 CO2선박 배출 규제를 조사 분석하고 향후 발전방향을 모색해 보고자 한다.

바닥용 건조시멘트 모르타르 배합 내 In-situ 탄산화 적용을 위한 CO2 주입 특성 및 물리적 특성 검토 (Evaluating the Effectiveness of In-Situ Carbonation in Floor Dry Cement Mortar Applications)

  • 김진성;조성현;김춘식
    • 한국건축시공학회지
    • /
    • 제24권1호
    • /
    • pp.1-10
    • /
    • 2024
  • In-situ 탄산화 기술은 시멘트 기반 건설재료의 제조과정에서 CO2를 주입하여 시멘트 수화과정에서 용출되는 Ca2+ 이온과 CO2의 탄산화 반응을 통해 CaCO3의 형태로 CO2를 격리하는 광물탄산화 기술이며, 본 연구에서는 현재 국내 건설현장에서 시공되고 있는 바닥용 건조시멘트 모르타르 배합의 범위에서 In-situ 탄산화 기술을 적용 시, CO2의 주입 유량 및 총 주입량을 검토하고, 바인더인 단위시멘트량 감축에 따른 제품의 품질 검토를 실시하였다.

활성화된(Fe1-xMnx)3O4-δ과 (Fe1-xCox)3O4-δ의 이산화탄소 분해 특성 (CO2 Decomposition Characteristics of Activated(Fe1-xMnx)3O4-δ and (Fe1-xCox)3O4-δ)

  • 박원식;오경환;이상인;서동수
    • 한국재료학회지
    • /
    • 제23권4호
    • /
    • pp.219-226
    • /
    • 2013
  • Activated magnetite ($Fe_3O_{4-{\delta}}$) has the capability of decomposing $CO_2$ proportional to the ${\delta}$-value at comparatively low temperature of $300^{\circ}C$. To enhance the $CO_2$ decomposition capability of $Fe_3O_{4-{\delta}}$, $(Fe_{1-x}Co_x)_3O_{4-{\delta}}$ and $(Fe_{1-x}Mn_x)_3O_{4-{\delta}}$ were synthesized and then reacted with $CO_2$. $Fe_{1-x}Co_xC_2O_4{\cdot}2H_2O$ powders having Fe to Co mixing ratios of 9:1, 8:2, 7:3, 6:4, and 5:5 were synthesized by co-precipitation of $FeSO_4{\cdot}7H_2O$ and $CoSO_4{\cdot}7H_2O$ solutions with a $(NH_4)_2C_2O_4{\cdot}H_2O$ solution. The same method was used to synthesize $Fe_{1-x}Mn_xC_2O_4{\cdot}2H_2O$ powders having Fe to Mn mixing ratios of 9:1, 8:2, 7:3, 6:4, 5:5 with a $MnSO_4{\cdot}4H_2O$ solution. The thermal decomposition of synthesized $Fe_{1-x}Co_xC_2O_4{\cdot}2H_2O$ and $Fe_{1-x}Mn_xC_2O_4{\cdot}2H_2O$ was analyzed in an Ar atmosphere with TG/DTA. The synthesized powders were heat-treated for 3 hours in an Ar atmosphere at $450^{\circ}C$ to produce activated powders of $(Fe_{1-x}Co_x)_3O_{4-{\delta}}$ and $(Fe_{1-x}Mn_x)_3O_{4-{\delta}}$. The activated powders were reacted with a mixed gas (Ar : 85 %, $CO_2$ : 15 %) at $300^{\circ}C$ for 12 hours. The exhaust gas was analyzed for $CO_2$ with a $CO_2$ gas analyzer. The decomposition of $CO_2$ was estimated by measuring $CO_2$ content in the exhaust gas after the reaction with $CO_2$. For $(Fe_{1-x}Mn_x)_3O_{4-{\delta}}$, the amount of $Mn^{2+}$ oxidized to $Mn^{3+}$ increased as x increased. The ${\delta}$ value and $CO_2$ decomposition efficiency decreased as x increased. When the ${\delta}$ value was below 0.641, $CO_2$ was not decomposed. For $(Fe_{1-x}Co_x)_3O_{4-{\delta}}$, the ${\delta}$ value and $CO_2$ decomposition efficiency increased as x increased. At a ${\delta}$ value of 0.857, an active state was maintained even after 12 hours of reaction and the amount of decomposed $CO_2$ was $52.844cm^3$ per 1 g of $(Fe_{0.5}Co_{0.5})_3O_{4-{\delta}}$.

공동주택 평면유형조합에 따른 시공단계 CO2 배출원단위 특징 분석 (Analysis of the Characteristic for CO2 Emission Intensity of the Plane Types in Apartments)

  • 최두성;전흥찬;조균형
    • 한국생활환경학회지
    • /
    • 제18권3호
    • /
    • pp.330-337
    • /
    • 2011
  • This research quantified(/m2) the supplied materials at the construction stage of apartments, the main architecture form domestically, and presented the average CO2 emission by analyzing 50 apartment complexes. The results are as follows. CO2 emission of each type of constructions by supplied materials is architecture (78.8%), machine (8.8%), electricity (5.3%), civil engineering (3.4%), landscaping (3.4%), and communication (1.0%). The building construction charged about 79%. Average CO2 emission of total 50 apartment complexes according to supplied material expense appeared to be 950 kg-CO2/m2, and when core-type pillar was included CO2 emission largely increased.

Insights into Enzyme Reactions with Redox Cofactors in Biological Conversion of CO2

  • Du-Kyeong Kang;Seung-Hwa Kim;Jung-Hoon Sohn;Bong Hyun Sung
    • Journal of Microbiology and Biotechnology
    • /
    • 제33권11호
    • /
    • pp.1403-1411
    • /
    • 2023
  • Carbon dioxide (CO2) is the most abundant component of greenhouse gases (GHGs) and directly creates environmental issues such as global warming and climate change. Carbon capture and storage have been proposed mainly to solve the problem of increasing CO2 concentration in the atmosphere; however, more emphasis has recently been placed on its use. Among the many methods of using CO2, one of the key environmentally friendly technologies involves biologically converting CO2 into other organic substances such as biofuels, chemicals, and biomass via various metabolic pathways. Although an efficient biocatalyst for industrial applications has not yet been developed, biological CO2 conversion is the needed direction. To this end, this review briefly summarizes seven known natural CO2 fixation pathways according to carbon number and describes recent studies in which natural CO2 assimilation systems have been applied to heterogeneous in vivo and in vitro systems. In addition, studies on the production of methanol through the reduction of CO2 are introduced. The importance of redox cofactors, which are often overlooked in the CO2 assimilation reaction by enzymes, is presented; methods for their recycling are proposed. Although more research is needed, biological CO2 conversion will play an important role in reducing GHG emissions and producing useful substances in terms of resource cycling.

Mn-Cu/Al2O3 촉매 상에서 NO, CO 및 CH4 동시 산화 (Simultaneous Oxidation of NO, CO, and CH4 over Mn-Cu/Al2O3 Catalyst)

  • 정지은;이창용
    • 공업화학
    • /
    • 제35권1호
    • /
    • pp.1-7
    • /
    • 2024
  • NO, CO 및 CH4의 동시 산화를 위한 4 종의 Mn-M/Al2O3 (M = Cu, Fe, Co, Ce) 촉매를 제조하여 산화 활성을 비교하고, 동시 산화활성이 가장 높은 Mn-Cu/Al2O3 촉매에 대해 XRD, Raman, XPS, O2-TPD 분석을 수행하였다. XRD 분석 결과, Mn-Cu/Al2O3 촉매에서는 담지된 Mn과 Cu는 복합산화물로 존재하였다. Raman 및 XPS 분석을 통해 Mn-Cu/Al2O3 촉매는 Mn-O-Cu 결합의 형성 과정에서 Mn 이온과 Cu 이온 간의 전자 수수가 일어남을 알 수 있었다. XPS O 1s 및 O2-TPD 분석을 통해 Mn-Cu/Al2O3 촉매는 Mn/Al2O3 촉매에 비해 이동성이 우수한 흡착산소 종이 증가했음을 알 수 있었다. Mn-Cu/Al2O3 촉매의 높은 동시 산화 활성은 이러한 결과에 기인한다고 판단된다. Mn-Cu/Al2O3 촉매 상에서 NO는 CO와 CH4 산화를 촉진하지만, NO 산화는 억제되었다. 이는 NO로부터 산화된 NO2가 CO 및 CH4의 산화제로 사용되었기 때문이라고 추측된다. CO와 CH4의 산화 반응은 경쟁하지만 촉매 활성 온도가 다르기 때문에 그 효과가 두드러지지 않았다.