• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.113-117
• /
• 2003

This paper describes the design and the simulation results of the RF CMOS Class-E Power Amplifier for a 2.4GHz ISM band. This circuit is composed two connected amplifiers. where Class F amplifier drives Class E amplifier. The proposed circuit can reduce the total power dissipation of the driving stage and can work with higher efficiency. The power amplifier has been implemented in a standard $0.25{\mu}m$ CMOS technology and is shown to deliver 100mW output power to load with 41% power added efficiency(PAE) from a 2.5V supply.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.335-339
• /
• 2003

This Paper describes the design and the simulation results of the RF CMOS Class-E Power Amplifier for a 2.4GHz ISM band. This circuit is composed two connected amplifiers. where Class F amplifier drives Class E amplifier. The proposed circuit can reduce the total power dissipation of the driving stage and can work with higher efficiency. The power amplifier has been implemented in a standard 0.25$\mu\textrm{m}$ CMOS technology and is shown to deliver 100mW output Power to load with 41％ power added efficiency(PAE) from a 2.5V supply.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.1-6
• /
• 2008

In this paper, bias control circuit structure have been employed to improve the power added efficiency of the CMOS class-E power amplifier on low input power level. The gate and drain bias voltage has been controlled with the envelope of the input RF signal. The proposed CMOS class-E power amplifier using bias controlled circuit has been improved the PAE on low output power level. The operating frequency is 2.14GHz and the output power is 22dBm to 25dBm. In addition to, it has been evident that the designed the structure has showed more than a 80% increase in PAE for flatness over all input power level, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.117-122
• /
• 2016

In this paper, we propose 24-GHz CMOS radio frequency (RF) power amplifier for short-range automotive collision avoidance radars. This circuit contains common source stage with inter-stages conjugate matching circuit as a class-A mode amplifier. The proposed circuit is designed using TSMC $0.13-{\mu}m$ mixed signal/RF CMOS process ($f_T/f_{MAX}=120/140GHz$). It operates at the supply voltage of 2V, and it is designed to have high power gain, low insertion loss and low noise figure in the low supply voltage. To reduce total chip area, the circuit used transmission lines instead of the bulky real inductor. The designed CMOS power amplifier showed the smallest chip size of $0.1mm^2$, the lowest power consumption of 40mW, the highest power gain of 26.5dB, the highest saturated output power of 19.2dBm and the highest maximum power-added efficiency of 17.2% as compared to recently reported results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.9-15
• /
• 2015

A CMOS band-pass delta-sigma modulator(BPDSM) and cascode class-E power amplifier have been developed CMOS for Class-S power amplifier applications. The BPDSM is operating at 1-GHz sampling frequency, which converts a 250-MHz sinusoidal signal to a pulse-width modulated digital signal without the quantization noise. The BPDSM shows a 25-dB SQNR(Signal to Quantization Noise Ratio) and consumes a power of 24 mW at an 1.2-V supply voltage. The class-E power amplifier exhibits an 18.1 dBm of the maximum output power with a 25% drain efficiency at a 3.3-V supply voltage. The BPDSM and class-E PA were fabricated in the Dongbu's 110-nm CMOS process.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.851-854
• /
• 1999

A high efficient, CMOS RF power amplifier at a 2.SV power supply for the band of 902-928MHz was designed and analyzed in 0.25${\mu}{\textrm}{m}$ standard CMOS technology. The output power of designed amplifier is being digitally controlled from a minimum of 2㎽ to a maximum of 21㎽, corresponding to a dynamic range of l0㏈ power control. The frequency response of this power amplifier is centered roughly at 915MHz. The power added efficiency of designed amplifer is almost 48% at maximum output power of 21㎽.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.89-94
• /
• 2007

For successful implementation of multi-standard transmitter, reconfigurable architecture and component design are essential. This paper presents a reconfigurable CMOS power amplifier designed CMOS 0.25 um process. Designed power amplifier can be operated at 0.9, 1.2, 1.75, and 1.85 GHz. Also, it can be used at 2.4 GHz by using bonding wire inductor. The interstage matching network is composed of two inductors and four switches, and operation frequency can be varied by controlling switches. Proposed power amplifier can be used as a power amplifier in low power applications such as ZigBee or Bluetooth application and used as a driver amplifier in high power application such as CDMA application. Designed power amplifier has 18.2 dB gain and 10.3 dBm output power at 0.9 GHz. Also, it represented 10.3 (18.1) dB gain and 5.2 (10) dBm output power at 1.75 (2.4) GHz.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.2
• /
• pp.98-101
• /
• 2007

A fully integrated 5-GHz CMOS power amplifier for IEEE 802.11a WLAN applications is implemented using $0.18-{\mu}m$ CMOS technology. An on-chip transmission-line transformer is used for output matching network and voltage combining. Input balun, inter-stage matching components, output transmission line transformer and RF chokes are fully integrated in the designed amplifier so that no external components are required. The power amplifier occupies a total area of $1.7mm{\times}1.2mm$. At a 3.3-V supply voltage, the amplifier exhibits a 22.6-dBm output 1-dB compression point, 23.8-dBm saturated output power, 25-dB power gain. The measured power added efficiency (PAE) is 20.1 % at max. peak, 18.8% at P1dB. When 54 Mbps/64 QAM OFDM signal is applied, the PA delivers 12dBm of average power at the EVM of -25dB.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1121-1124
• /
• 1998

A CMOS RF bandpass amplifier which performs both functions of low-noise amplifier and bandpass filter is designed for the application of 1.9 ㎓ RF front-end in wireless receivers. The positive-feedback Q-enhancement technique is used to overcome the low gain and low Q factor of the bandpass amplifier. The designed bandpass amplifier is simulated with HSPICE and fabricated using HYUNDAI $0.8\mu\textrm{m}$ CMOS 2-poly 2-metal full custom process. Under 3 V supply voltage, results of simulation show that the CMOS bandpass amplifier provides the power gain 23dB, noise figure 3.8 dB, and power dissipation 55mW.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.133-138
• /
• 2021

We propose a Ku-band three-stack CMOS power amplifier to enhance the output power and efficiency. To minimize the dc power consumption, the driver stage is designed using common-source structure. To obtain high output power and utilize a voltage combining method, the power stage is designed using stack structure. To verify the proposed power amplifier structure, we design a Ku-band power amplifier using 65-nm RFCMOS process which provide nine metal layers. The P1dB, power-added efficiency, and gain are higher than 20 dBm, 23 dB, and 25%, respectively, while the operating frequency is 14 GHz-16 GHz.