• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1385-1390
• /
• 2012

Couple of laboratory for controlled low strength materials with bottom ash and recycled in-situ soil have been carried out. The optimum mix ratios for 4 cases with flowability and unconfined compressive strength were determined. The optimim mixing ratios were 25 to 45% of insitu soil, 30% of bottom ash, 10 to 20% of fly ash, 0 to 3% of crumb rubber, 3% of cement and 22% of water. Each mixture was satisfied the standard specification, minimum 20cm of flowability and 127 kPa of unconfined compressive strength. Two different curling methods, at room temperature and wet condition, were adopted. The average secant modulus(E50) was 0.07 to 0.08 * $q_u$. The compressive strength at wet condition showed 10% larger than at room temperature. The range of internal friction angle and cohesion for mixtures were 36.5o to 46.6o and 49.1 to 180 kPa, respectively. The mixture with crumb rubber(case 4) showed higher choesion and lower internal friction angle than the others. The pH of all the mixtures was over 12 which is strong alkine.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.6
• /
• pp.598-605
• /
• 2010

This study investigated the physicochemical and enzymatic properties of unmarketable bastard halibut (Paralichthys olivaceus) cultured in different regions (i.e., Jeju, Wando, and Geoje) as a potential source of surimi and surimi gel. The proximate composition of unmarketable bastard halibut cultured in different regions did not differ significantly at P<0.05. Compared to Alaska pollock muscle, all of the unmarketable bastard halibut muscle had a 4% higher crude protein content and 5% lower moisture content. The collagen content of bastard halibut muscle cultured in Jeju was 1.96 g/100 g, which was higher than in fish cultured in other regions. Regardless of the region where cultured or pH, the enzymatic activities of the crude extracts from unmarketable bastard halibut muscle ranged from 0.30.0.48 U/mg for casein and hemoglobin, 11.9.13.7 U/mg for LeuPNA, 5.6.6.7 U/mg for ArgPNA, 2.8.4.7 U/mg for SAAPFNA, and 0.1.0.2 U/mg for BAPNA. Regardless of region, no mercury or lead was found in any of the unmarketable bastard halibut muscle, except for lead in fish cultured in Geoje. The strength of surimi gels from unmarketable bastard halibut cultured in Jeju, Geoje, and Wando was 1059, 988, and 900 g${\times}$cm, respectively. The surimi gel from unmarketable bastard halibut cultured in Jeju was stronger than commercial Alaska pollock surimi, which was grade SA.

• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.409-417
• /
• 2001

The purpose of this study was to investigate the influence of light irradiation over self-priming adhesive on dentin bonding. After acid etching the exposed dentin, a self-priming adhesive (Prime&Bond$^{\circledR}$NT dental adhesive system Dentsply DeTrey, GmbH, Konstanz, Germany) was applied and light irradiation was done for 20 sec with regular intensity (600 mW/$\textrm{cm}^2$) in group I and for 3 sec with ultra-high intensity (1930 mW/$\textrm{cm}^2$) in group III. No light irradiation was done over self-priming adhesive in groups II and IV. Composite resin was added on the self-priming adhesive and irradiated for 40 sec with regular intensity (600 mW/$\textrm{cm}^2$) in groups I and II and for 3 sec with ultra-high intensity (1930 mW/$\textrm{cm}^2$) in groups III and IV. To see the effect of light curing time on dentin bonding, another 3 group specimens were prepared. Without light-irradiation over self-priming adhesive, added composite resin was irradiated for 3, 6, or 12 sec with ultra-high intensity light. After bonded specimens were stored in 37$^{\circ}C$ distilled water for 24 hours, shear bond strength were measured using a universal testing machine (4202, Instron, Instron Co., U.S.A.) and fractured surfaces were examined under a stereomicroscope (SZ-PT Olympus, Japan). Statistical analysis were done with one-way, two-way ANOVA and chi-square test. The results were as follows : 1. The shear bond strengths from the groups irradiated over self-priming adhesive were significantly higher than those from the groups without irradiation (p<0.05). 2. There was no significant shear bond strength difference between regular intensity light irradiation groups and ultra-high intensity ones (p>0.05). 3. There was no significant shear bond strength difference among various irradiation time groups with ultra-high intensity ones (p>0.05). 4. In stereomicroscopic examination of fractured surfaces, adhesive-cohesive mixed failure mode was mostly seen in all groups, and there was no significant difference in failure mode among groups (p>0.05).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.289-289
• /
• 2013

While there are plenty of studies on synthesizing semiconducting germanium nanowires (Ge NWs) by vapor-liquid-solid (VLS) process, it is difficult to inject dopants into them with uniform dopants distribution due to vapor-solid (VS) deposition. In particular, as precursors and dopants such as germane ($GeH_4$), phosphine ($PH_3$) or diborane ($B_2H_6$) incorporate through sidewall of nanowire, it is hard to obtain the structural and electrical uniformity of Ge NWs. Moreover, the drastic tapered structure of Ge NWs is observed when it is synthesized at high temperature over $400^{\circ}C$ because of excessive VS deposition. In 2006, Emanuel Tutuc et al. demonstrated Ge NW pn junction using p-type shell as depleted layer. However, it could not be prevented from undesirable VS deposition and it still kept the tapered structures of Ge NWs as a result. Herein, we adopt $C_2H_2$ gas in order to passivate Ge NWs with carbon sheath, which makes the entire Ge NWs uniform at even higher temperature over $450^{\circ}C$. We can also synthesize non-tapered and uniformly doped Ge NWs, restricting incorporation of excess germanium on the surface. The Ge NWs with carbon sheath are grown via VLS process on a $Si/SiO_2$ substrate coated 2 nm Au film. Thin Au film is thermally evaporated on a $Si/SiO_2$ substrate. The NW is grown flowing $GeH_4$, HCl, $C_2H_2$ and PH3 for n-type, $B_2H_6$ for p-type at a total pressure of 15 Torr and temperatures of $480{\sim}500^{\circ}C$. Scanning electron microscopy (SEM) reveals clear surface of the Ge NWs synthesized at $500^{\circ}C$. Raman spectroscopy peaked at about ~300 $cm^{-1}$ indicates it is comprised of single crystalline germanium in the core of Ge NWs and it is proved to be covered by thin amorphous carbon by two peaks of 1330 $cm^{-1}$ (D-band) and 1590 $cm^{-1}$ (G-band). Furthermore, the electrical performances of Ge NWs doped with boron and phosphorus are measured by field effect transistor (FET) and they shows typical curves of p-type and n-type FET. It is expected to have general potentials for development of logic devices and solar cells using p-type and n-type Ge NWs with carbon sheath.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.61-61
• /
• 2009

P-type SGS-TFTs with 10 ${\mu}m$ channel length and two channel widths; $W_1=5{\mu}m$ and $W_2=10{\mu}m$ which has gate insulator made of 20nm $SiO_2$ and 80nm SiNx was fabricated and the electrical properties of them were measured. The field-effect mobility was increased from 95.84 to 104.19 $cm^2/V-s$ and threshold voltage also increased from -0.802 V to -0.954 V, when channel width is increased from5 ${\mu}m$ to 10 ${\mu}m$. Subthreshold swing decreased from 0.418 to 0.343 V/dec and $I_{on/off}$ ratio increased from $4.77{\times}10^7$ to $7.30{\times}10^7$.

• Journal of Astronomy and Space Sciences
• /
• v.6 no.2
• /
• pp.109-117
• /
• 1989

A total of 266 photoelectric observations(91 in V, 93 in B, and 82 in U) for an eclipsing binary, ZZ Cnc, has been secured by using the 61-cm reflector and an uncooled iP21 photomultiplier phototube of Yonsei University Observatory during 4 years from March 1984 to May 1988. One time of minimum light, JD 2446887.534 is obtained. Although Kim et al.(1988) suggested the possibility of the period change, the present study shows that the orbital period of ZZ Cnc should be constant. According in a reasonable interpretation of the eclipse light curves. Min I = JD Hel 2446887.574+25d.5944E $pm$2 $pm$2 may be useflul as new light elements for future observations.

• Korean Journal of Exercise Nutrition
• /
• v.13 no.1
• /
• pp.75-81
• /
• 2009

This study aims to find out the effect of ingestion of 3 mg·kg^-1 caffeine on fluid-electrolyte balance and Tty change during exercise under heat environment of 30~32℃ (40-50% humidity). Five trained males who routinely trained for approximately 60 min·d^-1, 3-6 d·wk^-1 (age; 28.20±3.56yrs, height; 174.56±5.46 cm, body mass; 76.13±9.02 kg, body fat(%); 14.24±3.99, VO₂max; 54.00±4.30 mL·kg^-1·min^-1, exercise career; 4.20±1.95yrs) performed 40min of treadmill running in heat chamber. The study was a double-blind, randomized, crossover design. Body mass change following exercise was higher for the PLAC (Placebo) and CAFF (Caffeine) in comparison to the CON (Control), there was no significant difference between the CAFF, PLAC, CON (p= .997). The U_sg not significant differences (p= .731) and Osm_urine not significant differences between the CAFF, PLAC, CON (p= .901). There also were not significant between the CAFF, PLAC, CON for [Na⁺]_urine and [K⁺]_urine (p= .928, p= .469). In the case of Tty, although the increase rate of Tty was the highest for the CAFF on exercise early, exercise the second half in comparison to the CON and PLAC, there was not significant interaction effect between the CAFF, PLAC, and CON of Tty (p= .067), In conclusion, it was confirmed that the 3 mg·kg^-1 caffeine ingestion prior to exercising in heat environment does not impart negative effect on body fluid, electrolyte balance and changes in Tty.

• Journal of Sericultural and Entomological Science
• /
• v.28 no.1
• /
• pp.66-71
• /
• 1986

The studies were carried out to screen the optimum conditions for enzymatic degumming of raw silk yarn and silk fabric by use of Alkalase, a protease produced by Bacteria, comparing with Papain and Trypsin representing natural proteolytic enzymes. 1. The optimum temperature and acidity of degumming solution were 70$^{\circ}C$, pH 5-6 for Papain degumming, 40$^{\circ}C$, pH 8 for Trypsin and 50-60$^{\circ}C$ pH 8-9 for Alkalase. 2. By increasing the Alkalase concentration in the range of 0.6 to 1.0 gram per liter, the time for enzymatic degumming of silk yarn could be reduced by 40 minutes. 3. In degumming of silk yarn by Alkalase, the pretreatment of 95$^{\circ}C$, 10 minutes at 0.1% sodium bicarbonate solution or posttreatent of 80$^{\circ}C$, 20 minutes at 2% (o.w.f.) sodium silicate solution improved the efficiency of enzymatic degumming, as compared to that of nontreatment. 4. The breaking strength, elongation and Lousiness results of enzymatically degummed silk yarn were apt to be improved more than those of soap-degummed one. 5. When the pretreatment of alkaline solution was done with over 20% of degumming ratio, the enzymatic degumming efficiency of both Havutae and Crepe de chine could be reached to the same level with those of soap-soda degummed. 6. As the pretreated silk fabric with 20% of degumming ratio was under action of three proteases, respectively, the deumming efficiency of Havutae and Crepe de chine were completed by Alkalase more than by Papain or Trpysin. 7. The stiffness of enzymatically degummed Crepe de chine was not only reduced by 17% more than that of soap-soda degummed one but also the Drape coefficient was decreased in enzymatically degummed fabrics, which was closely related with the soft touch of degummed fabrics.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.9
• /
• pp.1375-1380
• /
• 2005

The purpose of this study was to investigate anthropometric values, serum biochemical levels and their correlation in elementary school children. The subjects were 98 boys and girls in the $4{\~}6$ grade and divided into three groups by body size. The mean height of under-weight group (boys: $14.9\pm7.8\;cm$, girls: $144.9\pm9.6\;cm$) was the highest of the groups. The systolic and diastolic blood pressure of all the groups ranged from $111.56\pm13.51\;mmHg/72.86\pm7.26\;mmHg\;to\;117.50\pm10.00\;mmHg/75.31\pm9.51\;mmHg$, all within the normal levels. As subject was fatter, serum concentrations of triglyceride, total cholesterol, LDL-cholesterol insulin and atherogenic index (AI) in the boys, and serum concentrations of triglyceride, insulin and AI in the girls were significantly higher The concentrations of serum glucose, insulin, triglyceride, total cholesterol and LDL- cholesterol were significantly positively correlated with BMI and WHR. No significant correlation was found with blood pressure and serum lipid concentrations. Serum insulin levels was significantly positively correlated with serum glucose and triglyceride concentrations. Thus, this study implicates that obesity in childhood may be relevant to hyperlipidemia, atherosclerosis and diabetes mellitus.

• Journal of the East Asian Society of Dietary Life
• /
• v.26 no.1
• /
• pp.25-33
• /
• 2016

The study was performed to investigate the effects of whey protein-rich meal substitute added with vitamins, minerals, and lactobacillus powder probiotics on weight loss, body fat, and body composition in 24 female volunteers for 4 weeks. Whey protein-rich meal substitute was consumed with low-fat, high calcium milk (1% fat, 260 mg/200 mL) twice a day. Subjects submitted 3-day diet records and a life-style questionnaire before the study. During the study, subjects were required to turn in a diet record every day and consume the meal substitute formula in the metabolic ward at C university for 4 weeks. Anthropometric measurements were carried out weekly by Inbody 7.0. The dietary intake and anthropometric data were analyzed to compare changes before and after the study by paired t-test with SPSS version 23.0. The subjects were mostly early 20's and either overweight or obese and highly motivated to lose weight. Most of the subjects consumed three meals per day regularly and spent mostly 10~15 minutes for a meal. Their caloric intake was relatively low and decreased from 1,360 kcal at week 0 to 1,100 kcal after 4 weeks. However, total protein intake increased while carbohydrate and fat intakes decreased (p<0.05) after the trial. Nine vitamin intakes after the study improved compared to those before the study (p<0.05). After the study, subjects showed lower body weight (-1.8 kg), body fat (-0.94 kg), percent body fat (-0.86%), as well as waist circumference (-4.52 cm), hip circumference (-0.44 cm), waist hip ratio (-0.05), and triceps skinfold thickness (-2.39 mm) compared to those at week 0 (p<0.05). Muscle mass tended to be less compared to week 0, although there was no significant differences between weeks 0 and 4. In conclusion, diet trial with whey protein-rich meal substitute induced weight loss and positively changed body fat parameters and body composition.