• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.91-98
• /
• 2015

In order to apply to stretchable electronics packaging, locally stiffness-variant stretchable substrates consisting of island structure were fabricated by combining two polydimethylsiloxane elastomers of different stiffnesses and their elastic moduli were characterized as a function of the width of the high-stiffness island. The low-stiffness substrate matrix and the embedded high-stiffness island of the stretchable substrate were formed by using Dragon Skin 10 of the elastic modulus of 0.09 MPa and Sylgard 184 of the elastic modulus of 2.15 MPa, respectively. A stretchable substrate was fabricated to be a configuration of 6.5-cm length, 0.4-cm thickness, and 2.5-cm width, in which a high-stiffness Sylgard 184 island, of 4-cm length, 0.2-cm thickness, and 0.5~1.5-cm width, was embedded. The elastic modulus of a stretchable substrate was increased from 0.09 MPa to 0.16 MPa by incorporating the Sylgard 184 island of 0.5-cm width to Dragon Skin 10 substrate matrix. The elastic modulus was further improved to 0.18 MPa and 0.2 MPa with increasing the Sylgard 184 island width to 1.0 cm and 1.5 cm, which were in good agreement with values estimated by combining the Voigt structure of isostrain and the Reuss structure of isostress.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.196-199
• /
• 1996

The amplitude LSF(Line spread function, $C_1e^{{o^2}{x^2}}$ or amplitude impulse) of the Gaussian apodized annular pupil is found to be same to that of the full aperture LSF($C_0e^{{o^2}{x^2}}$). $C_0$ and $C_1$ depending on $\sigma$, ${\omega}_0=\frac{2{\pi}}{\lambda}\;\frac{a_0}{l}$ and ${\omega}_0'=\frac{2{\pi}}{\lambda}\;\frac{a_0'}{l}$ which are the geometric parameter and pupil coordinates of the annular pupil. The important inequality relation among ${\omega}_0,\;{\omega}_0'$, a (fraction of diffraction amplitude) and $\sigma$ is obtained. It is $\frac{{\omega}_0}{\sqrt{2}}<{\sigma}{\le}(\frac{1-a}{2a})^{1/2}\;{\omega}_0$, and in the case of $a=e^{-1},\;a_0'{\le}0.34a_0$. The case of λ=0.013${\mu}{\textrm}{m}$, l=20 cm, $a_0=5cm$ and $a_0=0.34a_0=1.7cm$ give a Gaussian apodized superresolution ${\Delta}=\frac{\sqrt{log2}}{\sigma}=0.008{\mu}m$ annular pupil with the intensity signal equal to $e_{-2}$ times the signal obtainable by using the full aperture system(a=1)

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.321-328
• /
• 2017

Treatment options for edentulous patients are complete denture and implant prosthesis. A two implant-retained overdenture can be considered the first treatment in the edentulous mandible, but there is no clear consensus of treatment for edentulous maxilla. Implant-retention/support overdenture shows better retention and stability than complete denture and is less expensive and more esthetic than implant-supported fixed prosthesis. CM $LOC^{(R)}$ $Pekkton^{(R)}$ attachment is a solitary type attachment and evaluated to have excellent abrasion resistance and retention with a female part made of poly-ether-ketone-ketone. Meanwhile, SR Ivocap system is injection molding method and discussed to show few changes in the vertical dimension of denture and have excellent fracture resistance. In this case, we restored maxillary arch with a four implant-retained overdenture using CM $LOC^{(R)}$ $Pekkton^{(R)}$ and SR Ivocap system, and mandibular arch with a removable partial denture. Through this procedure, satisfactory outcomes were achieved both in functional and esthetic aspects.

• Physical Therapy Korea
• /
• v.20 no.3
• /
• pp.36-44
• /
• 2013

This study aimed to investigate the influence of shoe heel height and muscle fatigue on static and dynamic balance in young women. Thirty women who were used to wearing high heels volunteered to participate in this study. The shoe heel heights were 0 cm and 7 cm. And ankle plantar flexor fatigue was experimentally induced. Static and dynamic balance were measured using the one leg standing test (OLST) and the star excursion balance test (SEBT) in anterior, posteromedial, and posterolateral directions, respectively. Values in the OLST (shoe heel height 0 cm, $28.83{\pm}3.24$ sec to $26.12{\pm}6.13$ sec; and 7 cm, $24.75{\pm}7.09$ sec to $16.86{\pm}9.32$ sec) and the SEBT in anterior (shoe heel height 0 cm, $71.02{\pm}4.57%$ to $69.50{\pm}3.66%$; and 7 cm, $64.17{\pm}3.53%$ to $59.61{\pm}4.06%$) and posteromedial (shoe heel height 0 cm, $92.01{\pm}5.61%$ to $90.38{\pm}7.10%$; and 7 cm, $83.09{\pm}7.29%$ to $76.83{\pm}9.28%$) directions were significantly reduced when fatigue-inducing exercise was performed (p<.05). Furthermore, within these parameters, there were significant interaction effects between shoe heel height and fatigue condition (p<.05). These findings suggest that shoe heel height and muscle fatigue contribute to some changes in static and dynamic balance in young women, probably leading to negative effects on physical function during a variety of activities of daily living.

• Korean Journal of Materials Research
• /
• v.8 no.11
• /
• pp.977-981
• /
• 1998

Controlling the wafer temperatures from 200 to$500^{\circ}C$, low resistive tungsten thin films used for VLSI metallization are deposited by PECVD method. Resistivities of plasma deposited tungsten thin films are very sensitive to the $H_2/WF_6 $ partial pressure ratios. Residual stress behaviors of the films as a function of plasma power density were also studied. At the power density under the $0.7W/\textrm{cm}^2$, residual stress of W film is about $2.4\times10^9dyne/\textrm{cm}^2$. When the power density is. however, increased from 1.8 to $2.7W/\textrm{cm}^2$, residual stress is suddenly increased from $8.1\times10^9$ to $1.24\times10^{10}dyne/\textrm{cm}^2$ ue to the ion or radical bombardment at high power density.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.6
• /
• pp.24-33
• /
• 2021

Cost management is a major function of CM (construction management) companies for clients and cost estimating is a critical task in that it provides a baseline for cost management and a foundation for decision making in construction projects. For this purpose, CM companies need to obtain and use good quality data, which leads to more accurate and efficient cost estimating. As the use of big data becomes increasingly important in the construction industry, researches related to the theme have become the active areas of studies. However, literature review shows that the current situations in relation to the use of big for cost estimating of CM companies are under-researched. The objective of the study is to identify key characteristics and implications in the use of big data for cost estimating of CM companies, which can contribute to develop strategies for such purposes.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.253-258
• /
• 2005

Characteristics of electroplated Ni films such as grain size, resistivity, solder wetting angle, and growth rate of intermetallic compound were evaluated as a function of electroplating current density. With increasing the electroplating current density from $5\;mA/cm^2 $ to $40\;mA/cm^2 $, the nodule size on the Ni film surface decreased, grain refinement occurred, and resistivity increased from $7.37\mu\Omega-cm$ to $9.13\mu\Omega-cm$. Compared with Ni film processed at $40\;mA/cm^2 $, Ni films electroplated at $5\;mA/cm^2 $ and $10\;mA/cm^2 $ exhibited low resistivity, dense microstructure, and slow growth rate of intermetallic compound. Ni films electroplated at $5\;mA/cm^2 $ and $10\;mA/cm^2 $ are more suitable for Ni UBM application than that fabricated at $40\;mA/cm^2 $.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.5
• /
• pp.322-330
• /
• 2020

Modeling for outliers in time series was carried out using the MSL and extreme high, low tide levels (EHL, HLL) data set in the Busan and Mokpo stations. The time-series model is seasonal ARIMA model including the components of the AO (additive outliers) and LS (level shift). The optimal model was selected based on the AIC value and the model parameters were estimated using the 'tso' function (in 'tsoutliers' package of R). The main results by the model application, i.e.. outliers and level shift detections, are as follows. (1) The two AO are detected in the Busan monthly EHL data and the AO magnitudes were estimated to 65.5 cm (by typhoon MAEMI) and 29.5 cm (by typhoon SANBA), respectively. (2) The one level shift in 1983 is detected in Mokpo monthly MSL data, and the LS magnitude was estimated to 21.2 cm by the Youngsan River tidal estuary barrier construction. On the other hand, the RMS errors are computed about 1.95 cm (MSL), 5.11 cm (EHL), and 6.50 cm (ELL) in Busan station, and about 2.10 cm (MSL), 11.80 cm (EHL), and 9.14 cm (ELL) in Mokpo station, respectively.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.5
• /
• pp.299-301
• /
• 2000

Analytical expression for the breakdown voltage of the gated diodes were derived as f function of doping concentration and gate voltage, and verified by numerical simulations using ATLAS. The analytical results are in good agreement with simulation results within 5% error when the gate voltage changes from -50V to 130V in case of ND = $1\times1015 cm^{-3}$ and within 10% error when the doping concentration is changed from $5\times1014 cm^{-3}\; to\; 2\times1015 cm6{-3}$, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.138-138
• /
• 2009

Al, Ga and In doped ZnO thin film were prepared by faing targets sputtering as a function of oxygen gas contents at R.T. Base pressure was $2{\times}10^{-6}torr$, and working pressure was 1mTorr. The properties of thin films on the electrical and optical properties of the deposited films were investigated by using a four-point probe (Chang-min), a Hall Effect measurement (Ecopia) and an UV/VIS spectrometer (HP). The minimum resistivities of AZO, GZO and IZO thin film were $6.5{times}10^{-4}[{\Omega}-cm],5.5{\times}10^{-4}[{\Omega}-cm]$ and $4.29{\times}10^{-4}[{\Omega}-cm]$. The average transmittance of over 80% was seen in the visible range.