• Title/Summary/Keyword: CM

검색결과 34,673건 처리시간 0.064초

백가수도의 재식밀도에 따른 생육 및 수량 (Effect of Planting Density on Growth and Yield in Cyanachum wilfordii)

  • 최인식
    • 한국자원식물학회지
    • /
    • 제8권2호
    • /
    • pp.209-215
    • /
    • 1995
  • 중부(中部) 내륙지방(內陸地方)에서 백하수오(白何首烏) 재배시(栽培時) 적정(適正) 재식밀도(栽植密度)를 구명(究明)하고자 충북(忠北) 지방(地方) 재래종(在來種)을 공시(供試)하여 10a당(當) 시비(施肥)는 웅비(施肥) 1,000kg, N-P-K=8-4-4kg을 전량(全量) 기비(基肥)로 시용(施用)하였다. 처리(處理)는 휴폭(畦幅)을 주구(주구)로, 주간(株間)을 세구(細區)로 하여, 휴폭(畦幅)은 40, 50, 60cm, 주간(株間)은 10, 15, 20cm로 하여 분류구배치(分劉區配置) 3반복(反復)으로 시험(試驗)을 수행(遂行)하였던 결과(結果)를 요약(要約)하면 다음과 같다. 1. 출현기(出現期)는 5월(月) 25일(日)로 처리간(處理間)에 차이가 없이 균일(均一)하였다. 2. 위장(萎長)은 휴폭간(畦幅間)에서 40cm는 219cm, 50cm는 220cm, 60cm는 225cm 였으나, 주간(株間)에는 10cm에서 225cm, 15cm는 219cm, 20cm는 218cm로 주간(株間)이 좁을수록 길었으며, 엽수(葉數)는 양장(養長)과 같은 경향(傾向)으로, 주간(株間)이 좁으면 엽수(葉數)는 증가(增加)되었다. 3. 근장(根長)은 휴폭(畦幅) 40cm에서 24.5cm, 50cm는 24.6cm, 60cm는 24.2cm로 큰 차이가 없으나, 주간(株間) 10cm에서 23.5cm, 24.4cm, 20cm는 24.9cm로, 주간(株間)이 넓을수록 $0.9\sim1.4cm$가 길었으며, 근수(根數)는 $1.2\siml.4$ 개(個)로 처리간(處理間)에 큰 차이가 없는 경향(傾向)이었다. 4, 10a당(當) 수양(收量)은 휴폭(畦幅) 40cm의 395kg/10a에 비(比)하여 50cm는 11%, 60cm는 4%가 각각(各各) 증수(增收)되었으나, 주간(株間) 10cm의 495kg/10a에 비(比)하여, 15cm는 17%, 20cm는 32%가 각각(各各) 감수(減收)되어, 중부(中部) 내륙지방(內陸地方)에서 백하수오(白何首烏) 재배시(栽培時) 재식밀도(栽植密度)는 휴폭(畦幅) 50cm, 주간(株間) l0cm로 재배(栽培)하는 것이 효과적(效果的)이었다.

  • PDF

CM 산업 발전을 위한 정책 및 과제 추진 방안 (Policies and Tasks for Improving Korean CM Industry)

  • 강승희;정영수;김남준;신동우
    • 한국건설관리학회논문집
    • /
    • 제15권5호
    • /
    • pp.71-81
    • /
    • 2014
  • 국내 건설투자가 점차 감소되는 환경 변화 속에서 해외 CM시장으로의 진출에 대한 중요성이 대두되고 있으며, 성공적인 CM시장의 진출 확대를 위해서는 건설사업 생애주기 관점에서의 CM 업무기능의 역량 강화가 요구된다. 본 연구에서는 CM산업 제도변화를 고찰하고, 생애주기별 CM업무 비중을 분석하였다. 분석 결과, 국내공공 CM사업은 시공단계에 업무 투입 노력이 78%이상 집중되어 시공전단계의 기술경쟁력 축적을 제도적으로 저해하고 있는 현실이다. 즉, 우리나라 CM기업이 해외시장 진출을 위한 생애주기관점에서의 기술 경쟁력 확보를 위해서는 CM기업 자체적인 역량 향상 노력도 중요하지만, 이에 못지않게 '인력배치 기준' 등에 대하여 유연성을 보장하는 제도적인 뒷받침이 필요하다. 이러한 배경에서, 본 연구에서는 '경직된 인력배치기준의 개선', '비합리적 CM대가기준의 개선', 'CM선정방식의 개선', '불합리한 업무범위 결정의 개선', '발주자 사업관리 역량 평가'와 같이 5가지 측면에서 우리나라 CM산업의 발전 및 해외시장 진출 확대 기반 마련을 위한 정책 및 제도 개선방안을 제시하였다.

민간 CM사업 시공이전단계 CM성과 저해요인 분석 (Barriers of CM Performance during Pre-Construction Stages in Private CM Projects)

  • 한재훈;김한수
    • 한국건설관리학회논문집
    • /
    • 제18권4호
    • /
    • pp.17-26
    • /
    • 2017
  • CM시장의 지속적인 발전은 CM성과에 대한 발주자의 수용을 전제로 하고 있으며, 이는 CM성과 향상을 위한 CM기업의 역량과 노력을 요구한다. 이를 위해서는 CM성과 향상을 저해하는 요인을 이해하고 이를 극복하기 위한 노력이 전제되어야 한다. 본 연구의 목적은 FMEA(Failure Mode and Effect Analysis)기법을 활용하여 민간 CM사업의 시공이전단계를 중심으로 CM성과 저해요인을 발굴하여 주요 특징을 분석하고 시사점을 제시하는데 있다. 본 연구를 통해 도출된 주요 결과는 CM성과 저해요인 해소를 통한 CM성과 향상을 위해서는 발주자와 CM사업자의 개별적인 노력과 협력적인 노력이 함께 경주되어야 한다는 것을 시사하고 있다.

머스크멜론 담액재배에서 적심 및 착과절위와 재식밀도가 과실의 품질 및 수량에 미치는 영향 (Effect of Pinching and Fruit Setting, and Planting Density on Fruit Quality and Yield of Muskmelon Cultured by Deep Flow Technique)

  • 황연현;조강희;송근우;신원교;정병룡
    • 생물환경조절학회지
    • /
    • 제7권3호
    • /
    • pp.219-225
    • /
    • 1998
  • 머스크멜론의 담액재배시 착과절위 및 적심절위와 재식밀도를 구명하기 위하여 착과절위는 7~8, 11~12, 또는 15~16절, 적심절위는 22 또는 27절, 재식밀도는 100cm$\times$25cm 100cm$\times$35cm, 100cm$\times$45cm 및 100cm$\times$55cm로 달리하였다. 과실품질은 동일한 착과절위일때 22절 적심구보다 27절 적심구에서 과중이 무겁고 당도가 높았다. 동일한 적심절위일때 착과절위가 높을수록 과중은 무겁고 당도는 낮았다. 100cm$\times$25cm 또는 100cm$\times$35cm 재식구보다 10cm$\times$45cm 또는 100cm$\times$55cm 재식구에서 과중이 더 크고 당도가 높았다. 총과실수량은 재식밀도가 낮아질수록 적었으나 상품과율은 반대로 높아서 상품과의 수량은 100cm$\times$45cm 재식구에서 가장 높았으며 100cm$\times$25cm, 100cm$\times$35cm, 100cm$\times$55cm 순으로 많았다.

  • PDF

중년여성의 하반신 체형분류에 따른 슬랙스 원형 제작 (A study on the basic slacks pattern for middled aged women based on their lower body shape analysis)

  • 정인향;함옥상
    • 대한인간공학회:학술대회논문집
    • /
    • 대한인간공학회 1997년도 추계학술대회논문집
    • /
    • pp.40-55
    • /
    • 1997
  • The purpose of this study are to examine the characters of the lower half body shape in the middle aged women and to make slacks patttern on the base of four difference body shapes as follows. The lower half body shapes were classified into 4 types on the basis of their lateral view silhouette, whose characters were summarized as followings. (1) "Type 1" meant the right body shape with the standard protrusion of abdomen and hips. (2) "Type 2" showed the body shape with prominent hips, which had the flat abdominal silhouette and the greatly curved hips silhouette. (3) "Type 3" was the body shape with the prominent abdomen and the flat hips, in which the frontal view silhouette of the abdomen was greatly curved and the rear view silhouette of hips is less curved. (4) "Type 4" was characterized with prominent abdomen and hips. The slaks patterns were based on the lower half body shape characters and resulted in followings. (1) In the type 1, little difference from conventional patterns was seen in experiment pattern, in which the front waist girth was W/4{\times}0.5cm+0.5cm+fold(2.5cm) and the back waist girth W/4+0.5cm-0.5cm+dart(3.5cm). The front hip girth was defined as H/4+2.0cm+0.5cm and the back hip girth as H/4+2.0cm-0.5cm due to its increased ease amount produced by abdominal fat deposition. (2) In the type 2 experimental pattern, the front and back differences of the waist girth and the hip girth were defined as 1.0cm and 2.0cm separately. Accordingly, the front waist girth was W/4+0.5cm+ 1.0cm+fold(2.0cm), the back waist girth W/4+0.5cm-1.0cm+dart(6.5cm), the front hip girth H/4+2.0cm+1.0cm and the back hip girth H/4+2.0cm-1.0cm. (3) In type 3, the front waist girth was set up as W/4+0.5cm+0.5cm+fold (4.5cm) for the increased front fold amount and the back waist girth was W/4+0.5cm+0.5cm+dart(3.0cm). The front hip girth was made as H/4+2.5cm+0.5cm and the back hip girth H/4+2.5cm-0.5cm. (4) In type 4, considered were $\circled1$ the increased fornt fold amount due to the abdonimal protrusion, $\circled2$ the increased back dart amount and the decreased back dart length owing to the hips prominent and $\circled3$ the front and back differences of waist and hip girth for the lateral view silhouette. Therefore the front waist girth was defined as W/4+0.5cm+2.0cm+flod (5.0cm), the back waist girth as W/4+0.5cm-20.cm+dart(4.0cm), the front hip girth as H/4+2.0cm+1.0cm and the back hip girth as H/4+2.0cm-1.0cm. The sensory evaluation of appearance and comfort was appeared more suitable on the experiment pattern than on the conventional pattern.

  • PDF

한국인(韓國人)의 연령(年齡) 및 신장별(身長別)에 따른 표준체격치(標準體格値)에 관(關)한 연구(硏究) -7세(歲)부터 20세(歲)까지의 남여(男女)를 중심(中心)으로- (Studies on Standard Physical Growth and Development by Age and Body Height in Korean Youth)

  • 안광태;박순영;박양원
    • Journal of Preventive Medicine and Public Health
    • /
    • 제17권1호
    • /
    • pp.145-172
    • /
    • 1984
  • In order to assess the physical growth pattern of Korean Youth, the authors measured the body height, body weight, chestgirth and sitting height of 40967 persons (24832 males and 16135 females) from primary schools, middle and high schools and colleges of metropolitan (urban) and rural areas, and calculated the mene, standard deviation, standard error and coefficient variance of the body weight chestgirth, sitting height and various pertinent index by body height to demonstrate the standard physical growth and development by body height of sex and age. The following conclusions were obtained. 1. Physical growth and development: Rapid growth of physical growth in terms of body height has been observed among males in the age $7{\sim}15$ and among female $7{\sim}13$. Growth in terms of body height turned out to be slower among students of higher age by both sexes. The age of cross over between to sexes is between 10 to 13 years where upon girls out grows boys. Maximum annual growth were upon girls out grows boys. Maximum annual growth were both of 6.16cm from 8 to 9 years old and 12 to 13 years old for boys and 7.2cm from 8 to 9 and 6.1cm from 9 to 10 for girls. This indicates that girls enter a rapidly growing stage 2 years earlier than boys. Meanwhile, prominent improvement in body height of national students over period of ten year was noticed. 2. The distribution status of body height by age: The distribution status of body height by age were as follows; 7 year of age: boys-30cm range of body height from 104.0cm to 133.9cm, girls-27cm from 104.0cm to 130.9cm 8 year of age: boys-30cm from 116.0 to 145.9cm girls-33cm from 113.0 to 145.9cm 9 year of age: boys-30cm from 116.0 to 145.9cm girls-33cm from 113.0 to 145.9cm 10 year of age: boys-39cm from 116.0 to 154.9cm girls-39cm from 119.0 to 157.9cm 11 year of age: boys-45cm from 119.0 to 163.9cm girls-39cm from 122.0 to 160.9cm 12 year of age: boys-45cm from 125.0 to 169.9cm girls-42cm from 125.0 to 166.9cm 13 year of age: boys-45cm from 128.0 to 172.9cm girls-42cm from 128.0 to 169.9cm 14 year of age: boys-48cm from 131.0 to 178.9cm girls-36cm from 134.0 to 169.9cm 15 year of age: boys-42cm from 137.0 to 181.9cm girls-33cm from 137.0 to 169.9cm 16 year of age: boys-39cm from 146.0 to 184.9cm girls-30cm from 143.0 to 172.9cm 17 year of age: boys-39cm from 146.0 to 184.9cm girls-27cm from 143.0 to 169.9cm 18 year of age: boys-36cm from 152.0 to 187.9cm girls-27cm from 146.0 to 172.9cm 19 year of age: boys-30cm from 155.0 to 184.9cm girls-24cm from 146.0 to 169.9cm 20 year of age: boys-24cm from 158.0 to 181.9cm girls-l8cm from 149.0 to 166.9cm 3. Standard values of body weight, chest-girth and sitting height by body height of age were found all age groups from 7 to 20 years old and listed in tables from3-a to 16-a. 4. Standard values of relative body weight, relative chestgirth and relative sitting height by body height of age were found all age groups from 7 to 20 years old and listed in tables from 3-b to 16-b. 5. Standard values of physical and nutritional indices (Rohrer index, Kaup index, Vervaeck index and Pelidisi index) by body height of age were found all age groups from 7 to 20 years old and listed in tables from 3-c to 16-c.

  • PDF

시공이전단계 CM서비스 활용수준 비교에 관한 연구 - 공공 및 민간 건축CM사업을 중심으로- (A Comparative Study on the Usage Level of Construction Management Services during Pre-Construction Stages - Focused on Public and Private Building Projects -)

  • 조홍근;김한수
    • 한국건설관리학회논문집
    • /
    • 제12권3호
    • /
    • pp.112-120
    • /
    • 2011
  • 지속적으로 성장하고 있는 CM시장에서 CM기업이 생존 발전하기 위하여 CM고객(발주자)의 수요에 대한 이해는 필수적인 과제이다. CM수요에 대한 이해는 CM서비스 마케팅의 필수 요건이자 CM기업 경쟁력 향상의 출발점이기 때문이다. 본 연구의 주제는"CM고객은 시공이전단계에서 CM기업에게 어떠한 CM서비스를 주로 요구하고 있는가?"라는 질문을 모티브로 설정되었으며 연구의 목적은 시공이전단계 CM서비스 활용수준을 공공 및 민간 건축CM사업을 중심으로 비교 분석하고 주요 특징 및 시사점을 발굴하는데 있다. 본 연구를 통해 나타난 주요 결과는 공공 및 민간 건축CM사업에서 발주자가 요구하는 CM서비스에는 다소 차이가 있지만 공정관리 및 사업비관리에 대한 활용 수준이 공통적으로 높은 것으로 나타나고 있다. 발주자가 CM기업으로부터 어떠한 CM서비스를 제공받기를 원하는지에 대한 이해는 CM기업 입장에서는 어떠한 CM서비스 역량을 우선적으로 강화해야하는지를 이해하고 대응 전략을 수립하는데 있어서 매우 중요한 과제이다.

The Analysis of the present condition of the Korean CM Market (Comparing the American CM Market)

  • Byung-Sik Yoon;Jung-Ho Yoo;Chang-Duk Kim
    • 국제학술발표논문집
    • /
    • The 3th International Conference on Construction Engineering and Project Management
    • /
    • pp.1534-1539
    • /
    • 2009
  • During the last ten years, there have been many studies related with settlement and reinvigoration of CM. These researches have shown that the application of CM has been not reinvigorated in Korean construction industry yet, because of some problems such as the insufficient application of the public sector, the policy matters and the CM fee estimates. But the present condition data of the Korean CM Market shown in these studies was insufficient for the standpoint of Market itself. Also, some of these studies compared the Korean CM Market with The America CM Market, to study the foreign CM markets. However, because the Korea CM Market only has the CM for Fee Market but the American CM Market has the CM for Fee and the CM at Risk, the Korea CM Market must be not only compared with the America CM Market but also compared with the America CM for Fee Market. Therefore, the purpose of this study is to determine the present condition of the Korea CM Market through the compare and contrast of the Korean CM Market, American CM Market and American CM for Fee Market, by the Market Growth rate and Market Share. This study further aims to verify whether Korean CM market was implemented.

  • PDF

델파이기법을 이용한 국내 공공공사 용역형 CM 시장의 활성화 전략 (CM Market Revitalization Strategies in Domestic Public Construction Projects based on Questionaries and Delphi Techniques)

  • 오세욱;한승우
    • 한국건설관리학회논문집
    • /
    • 제13권3호
    • /
    • pp.131-142
    • /
    • 2012
  • 용역형 CM방식은 1996년 "건설산업기본법"에 의해 국내에 처음 도입된 후 매우 익숙한 용역 발주 방식들 중 하나로서 제시되고 있으나 최근 건설경기 침체와 더불어 용역형 CM 시장은 지속적인 침체에서 벗어나지 못하고 있는 실정이다. 국내의 CM과 관련된 시장 환경 요소와 함께 제도기반이 아직까지 정착하지 못한 점이 이러한 관련시장 침제의 근본적인 원인 중 하나라고 볼 수 있다. 즉 발주자의 CM 서비스에 대한 부정적 인식과 함께 CM대가의 현실성 결여, CM서비스의 기술 발전 한계 등 CM과 관련된 제도 및 기반 환경에 대한 전반적인 문제점이 제기되고 있으며, 이에 대한 개선이 시급한 시점에 도달한 것으로 파악된다. 과거 10년간 공공건설 시장에 있어 CM이 태동되었다면 현재시점부터는 외형적 성장만을 위한 것이 아니라 CM과 관련된 주체들이 상호만족 할 수 있는 기반 환경이 조성되어야 한다. 이를 위해서는 건설 산업에 있어 CM의 역할이 구체적으로 정립되어야 한다. 이에 본 연구는 현재의 CM 제도 및 제반 환경 사항을 집중적으로 분석하여 현안의 문제점 및 개선안을 제시하고자 한다. 본 연구에서는 설문과 델파이기법을 연구방법론으로 이용하여 관련 전문가의 다양한 의견을 객관적인 방법으로 취합 제시하였으며, 이에 기반한 개선안을 도출함으로써, 연구의 목적을 성취하고자 한다.

CM서비스 상품 관리 전략 및 방법의 특징에 관한 연구 (Characteristics of Marketing Strategies and Methods in CM Service Commodity)

  • 송연주;박지철;김한수
    • 한국건설관리학회:학술대회논문집
    • /
    • 한국건설관리학회 2007년도 정기학술발표대회 논문집
    • /
    • pp.487-490
    • /
    • 2007
  • 국내 CM 시장이 2000년대에 들어서 지속적으로 커지고 있지만, CM 시장의 활성화 저해 요인들이 증가하고 있다. 발주자들의 CM 서비스 사용에 대한 인식과 동기부여가 부족한 것은 심각한 문제라고 할 수 있다. 이 시점에서 CM 업체들에게는 마케팅 활동을 활성화 해야 하는 것이 주요 과제이다. 본 논문의 목적은 CM 업체의 CM 서비스 상품의 관리 전략과 방법의 주요 특징을 분석 하고자 한다.

  • PDF