• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.53-56
• /
• 2008

A reinforced concrete (RC) cast-in-place (CIP) infill wall retrofitting method may provide an improved seismic performance and economical efficiency for the non-ductile rahmen structures. In this study, four one story-one bay non-ductile frame were constructed and retrofitted with CIP infill wall to evaluate seismic performance of CIP infill wall-frame. From the test results, infill wall-frame exhibited a marked increase in shear strength compared to non-ductile RC frame specimen. But the ductility and story-drift at maximum load were decreased when shear strength of infill wall larger than that of existing RC frame. Therefore, it is confirmed that adequate reinforcement detail is required to assure sufficient seismic performance.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.109-114
• /
• 2010

Interface tracking of two phase is significant to analyze multi-phase phenomena. The VOF(Volume of Fluid) and level set are well known interface tracking method. However, they have limitations to solve compressible flow and incompressible flow at the same time. CIP(Cubic Interpolate Propagation) method is appropriate for considering compressible and incompressible flow at once by solving the governing equation which is divided up into advection and non-advection term. In this article, we analyze the droplet impingement according to various We number using improved CIP method which treats nonlinear term once more comparison with original CIP method. Furthermore, we compare spread radius after droplet impingement on the wall with the experimental data and original CIP original CIP method, and it reduces the mass conservation error which is generated in the numerical analysis comparison with original CIP method.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.196-202
• /
• 2009

Study from Yogyakarta earthquake reconstruction program, cast-in-place wall using fix-size formwork system (Old-CIP) has offered a good alternative for house construction. A simulation has also confirmed that this system using mortar as the main material can provide cheapest cost and lowest total man power compared to conventional wall construction technique: brick or mortar-block wall. This paper presents the new wall construction technique: full size cast-in-place wall (New-CIP). The detail of how this new technique implemented is described. In addition, considering that material and labor cost in one area is different to others, cost analysis for different resources prices and wages of three cities are taken into a simulation. The analysis is aimed to distinguish the implementation feasibility of New-CIP system compared to the four common wall systems. Finally, its implementation resistance is also discussed.

• 한국융합학회논문지
• /
• 제6권6호
• /
• pp.163-169
• /
• 2015

본 연구는 기존의 가설 흙막이 벽으로만 사용되는 현장제조 CIP를 기성제 PHC 파일로 대체하여 흙막이 겸 영구벽체로 사용하는 융합 공법을 제안하고 적용가능성을 확인하였다. PHC파일은 공장제작으로 품질을 믿을 수 있으며 재료적으로 콘크리트 강도나 긴장재의 인장응력이 CIP에 비해 우수하고 구조적으로도 큰 휨내력을 가지고 있다. 이러한 장점을 기진 PHC파일을 이용한 영구벽체 공법은 기존의 가설 흙막이 공법과 비교하면 시공이 간편하고 경제적이며 현장타설이 최소화되어 공기단축이 가능하다. 또한 공장제작을 통해 균질한 구조성능을 얻을 수 있고 흙막이와 지하외벽이 이중 시공되지 않으므로 공간활용 측면에서도 유리한 장점이 있는 것으로 나타났다.

• 한국전산유체공학회지
• /
• 제15권4호
• /
• pp.25-31
• /
• 2010

Interface tracking of two phase is significant to analyze multi-phase phenomena. The VOF(Volume of Fluid) and level set are well known interface tracking method. However, they have limitations to solve compressible flow and incompressible flow at the same time. CIP(Cubic Interpolate Propagation) method is appropriate for considering compressible and incompressible flow at once by solving the governing equation which is divided up into advection and non-advection term. In this article, we analyze the droplet impingement according to various We number using improved CIP method which treats nonlinear term once more comparison with original CIP method. Furthermore, we compare spread radius after droplet impingement on the wall with the experimental data and original CIP method. The result using improved CIP method shows the better result of the experiments, comparison with result of original CIP method, and it reduces the mass conservation error which is generated in the numerical analysis comparison with original CIP method.

• 대한토목학회논문집
• /
• 제36권1호
• /
• pp.75-83
• /
• 2016

지하수위의 영향을 받는 지반에 대하여 터파기를 실시할 경우 차수문제를 해결하기 위한 방법으로 현장타설말뚝 공법인 CIP (Cast-In-Place Pile) 공법이 보편적으로 사용되고 있다. 그러나 CIP 공법은 말뚝간 연결성이 좋지 않아 많은 경우 차수에 대한 별도의 처리를 필요로 한다. 본 연구에서는 수중불분리성과 침투성을 향상시켜주는 계면활성제(Hi-FA)를 활용한 그라우트를 사용하여 기존 CIP 공법 대비 보조차수 공법의 필요성을 최소화한 새로운 개념의 흙막이 공법(H-CIP)을 제시하고, 이 공법의 현장 적용성에 대하여 검토하였다. 현장 검증실험을 위하여 동일한 지반조건에 대하여 H-CIP 공법과 기존 CIP 공법으로 각각 차수벽을 시공하고, 성능검증을 위한 현장시험 및 실내시험을 수행하였다. 현장 실험결과 새로 제안된 H-CIP 공법은 기존 CIP 공법에 비하여 현장 차수능과 강도가 우수한 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.247-250
• /
• 2005

The aim of Cast-In-Place(CIP) method is to upgrade the strength, ductility and stiffness of the structure to the required level. The main objective of this research is to investigate the shear and the flexural strength of reinforced concrete frames infilled with CIP reinforced concrete wall. For this three 1/3 scale, one-bay, one story reinforced concrete infill wall were tested under reversed cyclic loading simulating the seismic effect. Results of tests of CIP shear wall were reviewed to evaluate the current design provisions and to establish the feasible retrofitting method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.453-456
• /
• 2004

RC frames built prior to the advent of the philosophy of ductile concrete is one type of existing construction susceptible to damage. Strengthening and stiffening of such frames has been accomplished by infilled frames with cast-in-place, reinforced concrete walls. Placement of CIP shear walls within strategic bays of a structure appears to be a logical and economical method to strengthen a reinforced concrete frame and to stiffen a building in order to reduce architectural and mechanical damage. This study investigates the seismic performance of cast-in place infilled shear wall within existing frames. The object of this study is to clarify the seismic capacity and characteristics in the hysteretic behavior of bare frame, CIP infilled shear wall and CIP infilled wall reinforced diagonal bars.

• 한국지반신소재학회논문집
• /
• 제17권1호
• /
• pp.33-43
• /
• 2018

2열 겹침말뚝벽체는 30m 이상의 대심도에 적용 가능한 고강성의 주열말뚝으로서 동시에 연속성을 확보하여 차수벽이 되는 흙막이 벽체를 목표로 현재 개발 중에 있는 공법이다. 본 연구에서는 그러한 2열 겹침말뚝벽체의 최적 단면을 결정하는데 필요한 기초 데이터를 확보할 목적으로 여러 조건으로 가능한 시공 단면에 대하여 이론적 방법과 수치해석을 통해 각각의 휨 강성 특성을 조사하고, 이를 기존의 전형적인 CIP 및 SPW 단면의 휨 강성과 비교, 분석하였다. 그 결과, 말뚝 간 겹침길이가 커질수록 휨 강성이 감소하나 말뚝 주열수, 즉 1열과 2열 말뚝 간 휨 강성의 현저한 차이에 비해서는 그 차이가 미미한 것으로 나타났고 또한, 2열 겹침말뚝에서 보강재 종류와 말뚝개당 사용 개수가 휨 강성 크기에 미치는 영향은 겹침길이 차이에 따른 영향보다도 작은 것으로 나타났다. 따라서, 벽체의 구조적 성능 관점에서 본다면 2열 겹침말뚝벽체는 말뚝 간 겹침부 크기와 사용 보강재의 종류, 갯수에 크게 상관없이 대심도용 흙막이 벽체로 기존 공법인 CIP나 SPW 등에 비해 월등히 우수한 성능을 갖춘 것으로 파악되었다.

• 한국건축시공학회지
• /
• 제12권2호
• /
• pp.230-242
• /
• 2012

Recently the Permanent Uni-wall System (PUS) has been developed which improved the disadvantage of the Cast-In-Place Concrete Pile (CIP) and could be used as permanent retaining wall. In this study, joints between PUS and floor systems were developed. From analyses of the characteristics of design and construction of PUS, shear friction reinforcements with couplers were adopted for shear design of the joints. Twelve types of joints were developed which were classified according to the types of floor structures, wale, and piles of PUS. Two typical joints were tested and the joints showed satisfactory behaviors on the points of shear strength, stiffness, and serviceability. Especially the shear strengths were much higher than the design strengths due to the shear keys which were by-products in splicing shear reinforcements. However, the shear strength of the joint is recommended to be designed by only shear friction reinforcement because shear key is not reliable and too brittle.