• Korean Journal of Poultry Science
• /
• v.36 no.1
• /
• pp.77-84
• /
• 2009

The objective of the study was to investigate the effects of dietary green tea on chicken meat quality and fatty acid content. Broilers were fed one of the four dietary treatments containing 0, 0.5, 1 and 3 % green tea for 10 days. Crude moisture, crude fat, crude ash, pH, meat color (CIE $L^*$, $a^*$, $b^*$) and fatty acid composition were measured in chicken breast meat during cold-storage. Crude fat did not differ significantly among treatments. Dietary green tea increased the amount of unsaturated fatty acids and decreased that of saturated fatty acids in chicken meat, resulting in increased ratios of unsaturated fatty acids to saturated fatty acids. The amount of linoleic acid (18:2) and linolenic acid (18:3) was increased with increasing dietary green tea. Lightness ($L^*$), pH, TBARS, VBN, and total plate count were not significantly different during storage. Dietary green tea did not affect storage properties of chicken meat. The results of this study imply that dietary with green tea may have positive effects on chicken meat quality.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2019

Purpose: The aim of this study was to evaluate the influence of polishing methods on the color stability of composite resins. Materials and Methods: Two bulk-fill and four conventional resin composites were filled in cylindrical molds (6 mm diameter, 4 mm height) and light-cured. The specimens were stored in $34^{\circ}C$ distilled water for 24 h. Spectrophotometer was used to determine the color value according to the CIE $L^*a^*b^*$ color space. Each group was divided into three groups according to polishing methods (n = 5). Group 1 was control group (Mylar strip group), group 2 was polished with PoGo, and group 3 was polished with Sof-Lex Spiral wheels. Color evaluation was performed weekly for 4 weeks after immersion in $34^{\circ}C$ distilled water. The results were analyzed by generalized least squares method (P < 0.05). Results: Generalized least squares analysis revealed that Sof-Lex Spiral wheels group showed the significantly lower ${\Delta}E$ values compared to PoGo and control group (P < 0.05). The ${\Delta}E$ values of polished group showed the significantly lower than the ${\Delta}E$ values of unpolished group (P < 0.05). Regarding color changes of composite resins, there was no significant difference between the ${\Delta}E$ values of Filtek Z250 and Filtek Z350 XT Universal restorative in all time intervals (P < 0.05). Tetric N-Ceram Bulk Fill showed the significantly lower ${\Delta}E$ values compared to other composite resins in 1, 2, 3 weeks (P < 0.05). Conclusion: Within the limitations of this study, polishing methods influence the color stabilities of composite resins. The group polished with Sof-Lex Spiral Wheels showed more resistance to discoloration than group polished with PoGo.

• Food Science of Animal Resources
• /
• v.27 no.4
• /
• pp.424-431
• /
• 2007

This study was conducted to investigate the effect of intramuscular fat scores on pork quality assurance. Pork loins were collected from animals (110-120 kg body weight) slaughtered in a commercial slaughterhouse, assigned an IMF score (1-3) from and stored for 24 hrs at $-3^{\circ}C$. Samples were analyzed for chemical composition, pH, cooking and drip loss, shear force, meat color, and texture characteristics. The moisture, crude protein and crude ash content were not significantly different among the various IMF score groups. The crude fat content of the IMF score 3 group was significantly higher than the IMF score 1 and 2 groups (p<0.05). The pH values of the IMF score 2 and 3 groups was significantly higher than the IMF score 1 group (p<0.05). There was a no significant difference in shear force value and cooking loss among the IMF score groups. The purge loss content of the IMF 3 group was significantly lower than that of the IMF score 1 group (p<0.05). The increase in IMF score resulted in lower hardness, gumminess, and brittleness values. The hardness and gumminess of the IMF score 3 group were significantly lower than those of the IMF 1 score group. The adhesiveness, cohesiveness, and springiness were not significantly different among the IMF score groups. With regard to meat color traits, lightness ($CIE\;L^*$) was not significantly different among the IMF score groups. The $a^*\;and\;b^*$ values correlated positively with the IMF score. In general, the results of this study show that the CIE color values and drip loss had a positive correlation, while only redness was positively correlated with shear force and hardness. pH was negatively correlated with CIE color values and drip loss, while positively correlated with moisture content.

• Korean Journal of Poultry Science
• /
• v.47 no.2
• /
• pp.61-68
• /
• 2020

This study was conducted to compare and analyze meat quality of Korean native duck (KND) meat relative to stocking density. The stocking densities under investigation were 4, 5, 6, 7, 8 and 9 birds/㎡. The experiment comprised six treatments and four replications, wherein the breast meat (pH, meat color, and physicochemical properties) and leg meat (fatty acid contents) of 8-week-old KNDs (2.8±0.2 kg) were used. pH of breast meat decreased linearly and quadratically (P<0.05) as stocking density increased. Ash content also decreased linearly (P<0.05) as stocking density increased; however, moisture, fat, and protein contents did not differ significantly among treatments. Furthermore, meat color and cooking loss (CL) increased linearly (P<0.05) as stocking density increased whereas neither shear force (SF) nor water holding capacity (WHC) displayed a significant difference among treatments. Palmitic acid (C16:0) and stearic acid (C18:0) contents decreased quadratically (P<0.05) as stocking density increased whereas, conversely, linoleic acid (C18:1n9) and eicosenoic acid (C20:1n9) contents increased linearly (P<0.05) as stocking density increased. Additionally, γ-linoleic acid (C18:3n6) content increased linearly and quadratically (P<0.05) as stocking density increased, but a decrease (P<0.05) was observed in arachidonic acid (C20:4n6) content. Saturated fatty acid (SFA) and total unsaturated fatty acid (TUFA) contents did not show significant differences among treatments relative to stocking density. However, monounsaturated fatty acid (MUFA) content increased linearly (P<0.05) and polyunsaturated fatty acid (PUFA) content decreased linearly (P<0.05) as stocking density increased. These results can be utilized as basic data for research on the effect of stocking density on KNDs.

• Food Science and Preservation
• /
• v.23 no.7
• /
• pp.931-938
• /
• 2016

To evaluate the effect of freezing temperature on quality characteristics of dried persimmons, dried persimmons were frozen at $-50^{\circ}C$ (quick frozen, QF) and $-20^{\circ}C$ (slow frozen, SF) for 24 hr. Frozen persimmons were then stored at -20, -10, 0 and $10^{\circ}C$ for 80 days. Total free sugar content of SF persimmons was higher than those of QF in the $+10^{\circ}C$ and $-20^{\circ}C$ stored samples. Except for samples stored at $10^{\circ}C$, the CIE $L^*$ values for QF persimmons were higher than those for SF persimmons. For samples stored at $10^{\circ}C$ and $0^{\circ}C$, the CIE $a^*$ and $b^*$ values of SF samples were higher than those for QF samples. The texture of frozen dried persimmons was investigated to determine springiness, chewiness and hardness. Chewiness and hardness of samples held at $0^{\circ}C$ were higher in SF than in QF persimmons. However, when stored at $-10^{\circ}C$, chewiness and hardness were higher in QF than in SF samples. Springiness results were similar among the QF and SF persimmons held at different storage temperatures. For all storage temperatures, QF persimmons had a high soluble tannin content. All of the sample, the average soluble tannin contents of QF is 236.09 mg%. On the other hands, those of SF is 226.87 mg%. The results indicate that freezing rate and holding temperatures have significant effects on dried persimmon texture, soluble tannin level, and free sugar content. Further studies that include sensory evaluations are needed to determine the optimum freezing rate and holding temperature for dried persimmons.

• Food Science of Animal Resources
• /
• v.27 no.2
• /
• pp.228-234
• /
• 2007

The purpose of this study was to investigate quality characteristics of the meat batter containing dietary fiber extracted rice bran. The formulations of meat batters were manufactured in a model system with 2% raw rice bran and 2, 4, 6% levels of dietary fiber extracted rice bran, respectively. The proximate compositions of dietary fiber extracted rice bran were 53.27% dietary fiber, 6.10% crude fat, 22.99% crude protein, 12.78% crude moisture, and 7.41% crude ash. Compared with control of uncooked meat batter, the pH value of all treatments were significantly different(p<0.05). The pH of cooked meat batter were similar to uncooked meat batter. $CIE\;L^*-\;and\;CIE\;b^*-value$ of uncooked meat batter containing dietary fiber extracted rice bran were lower than control, but CIE $a^*-value$ of treatment was higher than those in control(p<0.05). All treatments had significantly lower cooking loss and emulsion stability than control(p<0.05). Compared with control, viscosity of the treatments containing dietary fiber extracted rice bran were observed significantly higher than those in control (p<0.05). And then hardness, cohesiveness, gumminess, and chewiness of treatments were higher than in control(p<0.05). Conclusively, the results of this study showed that addition of dietary fiber extracted rice bran affected the high quality properties of meat batter.

• Food Science of Animal Resources
• /
• v.24 no.4
• /
• pp.319-325
• /
• 2004

The objective of the present study was to investigate the effect of processing conditions on the physical and sensory properties of pork cutlet produced from chilled pork loin (T1), the cured and massaged chilled pork loin (T2), the cured and massaged frozen pork loin (T3), frozen pork loin (T4), massaged frozen pork loin (T5). Water holding capacity (WHC) of pork cutlets were not significantly different among the treatments. In chilled pork loin, WHC of T2 were slightly higher than that of T1. T4 showed the lowest WHC among all treatment group. In meat color, CIE L$\^$*/, a$\^$*/. b$\^$*/ values in chilled pork loin were not significantly different between T1 and T2. L$\^$*/ values of T3 and T5 were higher than that of T4. a$\^$*/ values were not significantly different among the all treatments. T3 produced through the curing and massaging treatment showed the highest tenderness in shear force (p< 0.001), while force value (kg/㎤) of T4 were the highest among all treatments. Separation ratio of wheat dough from pork cutlet was highest (p.<0.001) in T4. In triangle test, T1 : T3 combination was higher than that of other pairs. No differences in acceptability of sensory evaluation were observed among T1, T2, T3, and T5 groups, while the frozen pork showed the lowest (p<0.001) acceptability. In conclusion, pork cutlets from T4 with the curing and/or massaging process showed similar acceptance than those from chilled pork loins, and this treatments may contribute to promote the consumption of frozen pork loins.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.33-35
• /
• 2008

We have fabricated and evaluated new high efficiency green light emitting phosphorescent devices with an emission layer of $[TCTA_{1/3}TAZ_{2/3}/TAZ]:Ir(ppy)_3$. The whole experimental devices have the basic structure of $2-TNATA(500 {\AA})/NPB(300{\AA})/EML(300{\AA})/BCP(50{\AA})/SFC137(500{\AA})$ between anode and cathode. We have also fabricated conventional phosphorescent devices with emission layers of $(TCTA_{1/3}TAZ_{2/3}):Ir(ppy)_3$ and $(TCTA/TAZ):Ir(ppy)_3$ and compared their electroluminescence characteristics with those of the device with an emission layer of $(TCTA/TCTA_{1/3}TAZ_{2/3}/TAZ):Ir(ppy)_3$. The current density(J), luminance(L), and current efficiency($\eta$) of the device with an emission layer of $(80{\AA}-TCTA/90{\AA}-TCTA_{1/3}TAZ_{2/3}/130{\AA}-TAZ):10%-Ir(ppy)_3$ were 95 $mA/cm^2$, 25000 $cd/m^2$, and 27 cd/A at an applied voltage of 10V, respectively. The maximum current efficiency was 52 cd/A under the luminance of 400 $cd/m^2$. The peak wavelength and FWHM(full width at half maximum) in the electroluminescence spectral were 513nm and 65nm, respectively. The color coordinate was (0.30, 0.62) on the CIE (Commission Internationale de l'Eclairage) chart. Under the luminance of 15000 $cd/m^2$, the current efficiency of the device with an emission layer of $(80{\AA}-TCTA/90{\AA}-TCTA_{1/3}TAZ_{2/3}/130{\AA}-TAZ):10%-Ir(ppy)_3$ was 34 cd/A, which has been improved 1.7 times and 1.4 limes compared to those of the devices with emission layers of $(300{\AA}-TCTA_{1/3}TAZ_{2/3}): 10%-Ir(ppy)_3$ and $(100{\AA}-TCTA/200{\AA}-TAZ):10%-Ir(ppy)_3$, respectively.

• Journal of dental hygiene science
• /
• v.12 no.4
• /
• pp.342-347
• /
• 2012

This study is a temporary crowns and the period you want to avoid the exposure of the coffee girl polymerization types is difficult given the temporary tolerance by producing resin. 1. Change of brightness ($L^*$) edge in time increases, distilled water, Americano, Cafelatte, Vanillalatte was reduced to a significant level of brightness (p<.001). The most significant decrease in brightness of the Americano, which tend to grow out of a Cafelatte, Vanillalatte, which was followed by distilled water. 2. Change of redness ($a^*$) edge in time tend to increase saturation increases, the redness value of Americano, Cafelatte, redness value was a statistically significant difference in distilled water and Vanillalatte (p<.05) was not significant. 3. Change of yellowness ($b^*$) edge in time tend to increase saturation increases, the yellowness value of Cafelatte, Vanillalatte, Americano, except for distilled water at the saturation of yellowness value were no statistically significant (p<.05). 4. Change of color difference (${\Delta}E^*$) in order of (Americano>Cafelatte>Vanillalatte) as time of immersion increases change of color difference appear and no statistically significant (p<.05). Americano, the edge, since there can be more than chrominance is 3.3 uses station than a Vanillalatte, Cafelatte and discoloration when edge in 28, since even in the one to two difficult to distinguish with the naked eye as a discoloration. It was no difference statistically in color difference (${\Delta}E^*$) value in distilled water (p>.05).

• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.188-193
• /
• 2009

This study was conducted to determine the effect of mugwort powder on meat composition and sensory characteristics in finishing gilts $(LY{\times}D)$. Twenty pigs (75kg) were randomly allotted to four treatments. Mugwort powder was added to final concentrations of 0(C), 0.5(T1), 1.0(T2), and 1.5%(T3) in the basal diet. Pigs were fed with the specified diet for 50 days. Carcass characteristics and cooking loss were not significantly affected by mugwort powder supplementation. The WHC and cooking loss of T2 and T3 were not significantly different than the control. However, the pH values for meat from gilts fed the T1 and T3 diets were significantly lower than the control (p<0.05). Shear force values of fresh meat were highest with the T3 diet (p<0.05), while the shear force values of cooked meat were significantly lower than the control with the T2 and T3 diets. Texture values of hardness, brittleness, gumminess, chewiness, and adhesiveness were significantly higher with the T3 diet (p<0.05), however values for cohesiveness and springiness were not significantly affected by mugwort powder supplementation. These results indicate that the feeding of mugwort powder improves the shear force of cooked meat from gilts fed the T3 diet, however the carcass, WHC and cooking loss characteristics in gilts are not affected by mugwort powder supplementation.