• 대한치과재료학회지
• /
• 제44권3호
• /
• pp.263-272
• /
• 2017

본 연구에서는 타이타늄 상에 항균제 클로르헥시딘(chlorhexidine; CHX)이 함유된 수산화인회석을 코팅하고 그 특성을 규명하였다. CHX를 혼합한 개조된 생체유사용액(modified simulated body fluid; mSBF)에 타이타늄 디스크를 침적하여 Ti-mSBF-CHX 시편군을 준비하였다. CHX를 함유하지 않은 mSBF에 침적하여 코팅한 Ti-mSBF 시편군을 다시 CHX 용액에 침적하여 Ti-mSBF-adCHX 시편군을 준비하였다. Ti-mSBF 시편 표면에 나노 형태의 결정들로 구성된 구형의 클러스터들이 균일하게 코팅되었다. Ti-mSBF-CHX 시편에서는 이러한 클러스터들과 함께 리본형상의 결정들이 관찰되었으며, 이 결정들에서 높은 CHX 조성이 측정되었다. 두 시편 모두 HAp 결정구조가 지배적이었으며, ${\beta}-TCP$ (tricalcium phosphate)와 OCP (octacalcium phosphate) 결정구조가 Ti-mSBF-CHX 시편에서 관찰되었다. FT-IR 스펙트럼은 Ti-mSBF-adCHX와 Ti-mSBF-CHX 시편군에서 CHX의 피크가 강하게 관찰되었다. 그러나 인산완충식염수(phosphate buffered saline;PBS)에 침적한 후, CHX가 Ti-mSBF-CHX 시편에서는 천천히 용출된 반면, Ti-mSBF-adCHX 시편에서는 빠르게 용출되었다. 따라서 Ti-mSBF-CHX 시편은 골과 유사한 HAp 구조를 가지며 함유된 CHX가 지속적으로 방출될수 있기 때문에 향후 임플란트 시술에서 염증을 방지할 수 있는 코팅법으로 기대된다.

• Restorative Dentistry and Endodontics
• /
• 제37권1호
• /
• pp.9-15
• /
• 2012

Objectives: This study evaluated the effect of 2% chlorhexidine digluconate (CHX) with different application times on microtensile bonds strength (MTBS) to dentin in class I cavities and intended to search for ideal application time for a simplified bonding protocol. Materials and Methods: Flat dentinal surfaces with class I cavities ($4mm{\times}4mm{\times}2mm$) in 40 molar teeth were bonded with etch-and-rinse adhesive system, Adper Single Bond 2 (3M ESPE) after: (1) etching only as a control group; (2) etching + CHX 5 sec + rinsing; (3) etching + CHX 15 sec + rinsing; (4) etching + CHX 30 sec + rinsing; and (5) etching + CHX 60 sec + rinsing. Resin composite was builtup with Z-250 (3M ESPE) using a bulk method and polymerized for 40 sec. For each condition, half of the specimens were immediately submitted to MTBS test and the rest of them were assigned to thermocycling of 10,000 cycles between $5^{\circ}C$ and $55^{\circ}C$ before testing. The data were analyzed using two-way ANOVA, at a significance level of 95%. Results: There was no significant difference in bond strength between CHX pretreated group and control group at the immediate testing period. After thermocycling, all groups showed reduced bond strength irrespective of the CHX use. However, groups treated with CHX maintained significantly higher MTBS than control group (p < 0.05). In addition, CHX application time did not have any significant influence on the bond strength among groups treated with CHX. Conclusion: Application of 2% CHX for a short time period (5 sec) after etching with 37% phosphoric acid may be sufficient to preserve dentin bond strength.

• Journal of Microbiology and Biotechnology
• /
• 제27권12호
• /
• pp.2211-2220
• /
• 2017

Chlorhexidine gluconate (CHX) and benzalkonium chloride (BZK) formulations are frequently used as antiseptics in healthcare and consumer products. Burkholderia cepacia complex (BCC) contamination of pharmaceutical products could be due to the use of contaminated water in the manufacturing process, over-diluted antiseptic solutions in the product, and the use of outdated products, which in turn reduces the antimicrobial activity of CHX and BZK. To establish a "afe use" period following opening containers of CHX and BZK, we measured the antimicrobial effects of CHX ($2-10{\mu}g/ml$) and BZK ($10-50{\mu}g/ml$) at sublethal concentrations on six strains of Burkholderia cenocepacia using chemical and microbiological assays. CHX (2, 4, and $10{\mu}g/ml$) and BZK (10, 20, and $50{\mu}g/ml$) stored for 42 days at $23^{\circ}C$ showed almost the same concentration and toxicity compared with freshly prepared CHX and BZK on B. cenocepacia strains. When $5{\mu}g/ml$ CHX and $20{\mu}g/ml$ BZK were spiked to six B. cenocepacia strains with different inoculum sizes ($10^0-10^5CFU/ml$), their toxic effects were not changed for 28 days. B. cenocepacia strains in diluted CHX and BZK were detectable at concentrations up to $10^2CFU/ml$ after incubation for 28 days at $23^{\circ}C$. Although abiotic and biotic changes in the toxicity of both antiseptics were not observed, our results indicate that B. cenocepacia strains could remain viable in CHX and BZK for 28 days, which in turn, indicates the importance of control measures to monitor BCC contamination in pharmaceutical products.

• 대한치과의사협회지
• /
• 제54권3호
• /
• pp.206-216
• /
• 2016

Objectives The aim of this study was to evaluate the antibacterial effect of xanthorrhizol (XTZ) on E. faecalis, compared with 2% chlorhexidine (CHX). Materials and Methods Normal physiological state (NS), starvation state (SS), and alkalization state (AS) of E. faecalis were used. A solution containing 1% XTZ in 30% ethanol, 1% dimethyl sulfoxide (DMSO), and 100 mg/ml sodium methyl cocoyl taurate was used and is referred to as Xan in this study. To determine the minimal bactericidal concentration (MBC) of Xan and CHX, $500{\mu}l$ of E. faecalis (NS and two stress states) was added to a microtube containing $500{\mu}l$ of serial 2-fold dilutions of 1% Xan and 2% CHX (1:2-1:128). The MBC of each antimicrobial was determined by the plate count method. Results The antibacterial effect of Xan was more effective on E. faecalis in AS than in the other states (NS, SS) at 0.125% Xan and 0.03325% Xan (P<0.05). In contrast, the antibacterial effect of CHX was more effective against E. faecalis in SS than the other states (NS, AS) at 0.0625% CHX (P<0.05). In SS, the antibacterial effect of CHX was more effective than that of Xan at 0.125% and 0.0625% (P<0.05). However, in AS, the antibacterial effect of Xan was more effective than that of CHX at 0.0625% and 0.03325% (P<0.05). Conclusions In endodontic retreatment cases in which it is important to effectively remove E. faecalis from the infected root canal, Xan may be more suitable when combined with NaOCl than CHX.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.375-383
• /
• 2006

사람치주인대섬유모세포(human periodontal ligament fibroblast, PDLF)의 기능 손상과 클로르헥시딘(Chlorhexidine, CHX)의 세포독성에 관한 분자적인 기전은 최근까지도 불명확하다. 이 연구의 목적은 PDLF에 의한 골결절 형성에 있어서 CHX의 효과를 평가하고, 치주수술후에 치주병원균의 최소억제농도(minimal inhibitory concentration, MIC)를 평가하고자 하였다. CHX의 세포독성을 평가하기 위해서 MTT assay법을 실시하였다. CHX은 0.12%에서 0.00012%까지, 즉 10-1000배로 희석시킨 후 30, 60, 120초 동안 PDLF에 적용되었고, 석회화된 결절은 alizarin red 용엑에 염색되었다. 치주병원균에 대한 CHX의 MIC가 평가되었다. 이 연구 결과, 세포생존율 검사에서는, 단지 0.12% CHX 에 노출되었던 세포들만 세포 증식 소견을 다소 나타내었다. 모든 CHX 농도(0.12%-0.00012%)에서 PDLF에 의한 골결절 형성은 의미있는 감소를 나타내었다. 또한 치주병원균에 대한 CHX의 MIC는 0.0012%로 나타났다. PDLF의 골결절 형성에 영향을 주는 농도(0.00012%)는 세포독성을 나타내는 농도(0.12%)보다 더 낮은 농도를 보였고, 치주병원균의 최소억제에 필요한 농도는 0.0012%로 나타났다. 이런한 결과들은 통상적으로 상용되는CHX이 PDLF에 의한 골결절 형성에 있어서 영향을 미칠 수 있음을 시사하였다.

• Restorative Dentistry and Endodontics
• /
• 제37권4호
• /
• pp.207-214
• /
• 2012

Objectives: This study evaluated the influence of chlorhexidine (CHX) on the microtensile bonds strength (${\mu}TBS$) of resin core with two adhesive systems to dentin in endodontic cavities. Materials and Methods: Flat dentinal surfaces in 40 molar endodontic cavities were treated with self-etch adhesive system, Contax (DMG) and total-etch adhesive system, Adper Single Bond 2 (3M ESPE) after the following surface treatments: (1) Priming only (Contax), (2) CHX for 15 sec + rinsing + priming (Contax), (3) Etching with priming (Adper Single Bond 2), (4) Etching + CHX for 15 sec + rinsing + priming (Adper Single Bond 2). Resin composite build-ups were made with LuxaCore (DMG) using a bulk method and polymerized for 40 sec. For each condition, half of specimens were submitted to ${\mu}TBS$ after 24 hr storage and half of them were submitted to thermocycling of 10,000 cycles between $5^{\circ}C$ and $55^{\circ}C$ before testing. The data were analyzed using ANOVA and independent t-test at a significance level of 95%. Results: CHX pre-treatment did not affect the bond strength of specimens tested at the immediate testing period, regardless of dentin surface treatments. However, after 10,000 thermocycling, all groups showed reduced bond strength. The amount of reduction was greater in groups without CHX treatments than groups with CHX treatment. These characteristics were the same in both self-etch adhesive system and total-etch adhesive system. Conclusions: 2% CHX application for 15 sec proved to alleviate the decrease of bond strength of dentin bonding systems. No significant difference was shown in ${\mu}TBS$ between total-etching system and self-etching system.

• Restorative Dentistry and Endodontics
• /
• 제40권1호
• /
• pp.50-57
• /
• 2015

Objectives: The usage of medicinal plants as natural antimicrobial agents has grown in many fields including dental medicine. The aim of this in vitro study was three-fold: (i) to determine the chemical compositions of the Ferula gummosa essential oil (FGEO), (ii) to compare the antimicrobial efficacy of the oil with sodium hypochlorite (NaOCl) and chlorhexidine (CHX), (iii) to assess the toxic behavior of FGEO in different concentrations compared to 5% NaOCl and 0.2% CHX. Materials and Methods: Gas chromatography/mass spectrometry (GC/MS) was used to determine the chemical compositions of the oil. The disk diffusion method and a broth micro-dilution susceptibility assay were exploited to assess the antimicrobial efficacy against Enterococcus faecalis, Staphylococcus aureus, Streptococcus mitis, and Candida albicans. The cytocompatibility of the FGEO was assessed on L929 fibroblasts, and compared to that of NaOCl and CHX. Results: Twenty-seven constituents were recognized in FGEO. The major component of the oil was ${\beta}$-pinene (51.83%). All three irrigants significantly inhibited the growth of all examined microorganisms compared to the negative control group. FGEO at $50{\mu}g/mL$ was effective in lower concentration against Enterococcus faecalis than 5% NaOCl and 0.2% CHX, and was also more potent than 0.2% CHX against Candida albicans and Staphylococcus aureus. FGEO was a cytocompatible solution, and had significantly lower toxicity compared to 5% NaOCl and 0.2% CHX. Conclusions: FGEO showed a promising biological potency as a root canal disinfectant. More investigations are required on the effectiveness of this oil on intracanal bacterial biofilms.

• Restorative Dentistry and Endodontics
• /
• 제29권6호
• /
• pp.548-552
• /
• 2004

본 연구는 제어방출형 근관소독제(CRD)로 부터 chlorhexidine (CHX)의 방출 속도를 제어하기 위한 3가지 polymer (chitosan, PMMA, PLGA) 의 코팅 효과를 평가하기 위함이다. 80번 paper point (Sure-EndoTM)에 20% CHX를 loading 한 후 각 군당 10개씩 4군으로 분류하였다: Group A: 폴리머를 코팅하지 않은 CRD prototype (control), Group B: chitosan-coated prototype, Group C: PMMA-coated prototype, Group D: PLGA-coated prototype. 모든 시편은 3 ml 증류수가 담긴 큐벳에 넣은 후 3, 6, 10, 20, 30, 40, 50분 마다, 1, 2, 3, 4, 5, 6시간마다 각각 10 μl 씩 채취하고, 1주일 후 다시 10 μl을 채취한 후 UV 흡광도를 이용하여 CHX의 방출 속도를 비교하였다. 실험결과 제어방출형 근관소독제로부터 CHX의 방출속도는 대조군, 키토산, PLGA, PMMA-군 순으로 천천히 일어났으며 PMMA군에서 가장 천천히 일어났다. 결론적으로 제어방출형 근관소독제 표면의 폴리머는 약물 (CHX) 방출속도를 효과적으로 제어하였다.

• Journal of Periodontal and Implant Science
• /
• 제23권3호
• /
• pp.507-516
• /
• 1993

The Chlorhexidine(CHX) has been a widely used adjunt in periodontal therapy due to its bactericidal effect. In spite of the effects of CHX exhibits cytotoxic to human cells and delays granulation tissue formation. Therefore, understanding the effects of CHX on fibroblast attachment and cell growth will provide the rationale for its use during healing phase of periodontal surgery. This study was undertaken to examine the effects of standardized CHX-pretreated dentin slices and direct CHX exposure on human gingival fibroblasts. The results were as follow : 1. In experiment 1, there was a significant reduction in the number of fibroblast attachment in 0.12, 1%-pretreated groups relative to the control, 0.05%-pretreated groups(P<0.05). 2. In experiment 1, the control, 0.05%-pretreated groups showed considerable attachment and typical fibroblastic morphology, but 0.12, 1%-pretreated groups showed irregular, round-up (unattached) fibroblastic morphology. 3. In experiment 2, it appeared that all experimental groups exhibits significant inhibition of cell growth when compared with the control group.

• Restorative Dentistry and Endodontics
• /
• 제33권2호
• /
• pp.148-161
• /
• 2008

본 연구는 상아질 혼성층의 교원섬유를 가수분해하는 효소인 MMPs (Matrix metalloproteinses)의 억제제로 알려진 chlorhexidine (CHX)을 적용 후 결합강도를 측정하였으며, 이를 각각 열순환 처리 후 결합강도를 측정하였다. 또한 주사전자현미경으로 접착계면에서의 파괴 양상을 비교 분석하였다. 우식이 없는 발거한 32개의 제3대구치의 교합면 상아질을 노출시키고 GI그룹에서는 dentin conditioner를 처리 후 2% chlorhexidine을 적용시키고, 산부식 접착제 그룹에서는 인산 산부식을 시행하고 2% chlorhexidine을 적용 후 3단계 산부식형 상아질 접착제 (Scotchbond Multipurpose, SM), 2단계 산부식형 상아질 접착제 (Single Bond, SB)를 도포하고, 자가부식 접착제 그룹에서는 2% chlorhexidine 적용 후 자가부식 상아질 접착제 (Clearfil Tri-S, TS)를 도포한다. 이후 복합 레진 (Z-250)과 GI (Fuji-II LC)를 충전한 시편을 $1\;mm^2$의 단면을 갖는 beam으로 제작하여 열순환 하지 않거나, 10,000회 열순환 ($5\;{\sim}\;55^{\circ}C$)하였다. Universal testing machine (EZ-test; Shimadzu, Japan)에서 cross head speed 1 mm/min로 인장력을 가하여, 미세인장결합강도를 측정하였다. 실험 결과는 유의수준 0.05 level에서 two-way ANOVA를 이용하여 통계분석하였다. 그 후 파절된 시편의 파괴 양상을 현미경 (SEM)으로 관찰하여 다음과 같은 결론을 얻었다; 1. 2% CHX을 적용한 모든 실험군에서 상아질과의 미세인장결합강도가 증가하였고, 열순환은 상아질과의 미세인장결합강도를 감소시켰다 (P > 0.05). 2. CHX 적용 후 열순환 한 군은 CHX을 적용하지 않고 열순환한 군에 비하여 상아질과의 미세인장결합강도가 높았으며, 특히 GI와 TS군에서 유의한 차이를 나타내었다 (P < 0.05). 3. 파괴 양상 분석 결과, 혼성층에서의 접착성 파괴를 보이며, CHX을 적용하면 혼성층 기저부에서 상부로 파괴 부위가 옮겨가는 양상을 나타내었다. 이상의 연구 결과를 토대로, MMPs 억제제인 2% CHX은 글래스 아이오노머 시멘트와 상아질 접착제의 초기 미세인장결합강도에는 영향을 미치지 않으며, CHX 적용이 접착내구성을 유지하는데 도움이 되었다.