• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.08a
• /
• pp.291-291
• /
• 2008

• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.918-931
• /
• 1995

임계열속을 예측하는 기존의 여러 방법중 임계열속 발생 역학구조에 근거한 이론적 접근 방법은 여러 유동형태(Flow pattern)별로 연구되고 있으며, 대표적으로 환상유동에서의 LFD(Liquid Film Dryout) 이론, 기포류에서의 BBLD(Bubble Boundary Layer Dryout) 흑은 LNID(Local Nucleation Initiated Dryout)이론 등이 제시되고 있다. 본 논문에서는 일반적으로 원자로 조건에 서 적용될 수 있는 LFD이론과 BBLD 이론에 대하여 대표적인 모델들을 소개하고 특성을 검토하였다. 특히 BBLD 이론중에서 기포군집 (Bubble coalescence) 모델과 층류막 드라이 아웃(Sublayer dryout) 모델에 대해서는 원형관에서의 임계열속 시험자료를 사용하여 각 모델의 예측 성능 및 특성을 평가하였다. 평가 결과, 기포군집 모형인 Weisman 모델의 예측성능이 가장 우수했으며 아울러 층류막 드라이아웃 모델인 Katto 모델과 Mudawwar 모델은 구성 인자중 기포군속도와 층류막 두께와의 관계가 보다 정확히 모형화되야 할 것으로 판단된다.

• Electrical & Electronic Materials
• /
• v.7 no.4
• /
• pp.294-299
• /
• 1994

CHF$_{3}$/CH$_{4}$Ar 플라즈마에 의해 형성된 산화막 식각 잔류물의 화학구조와 이 잔류물의 제거를 위한 세정방법을 x-ray photoelectron spectroscopy를 이용하여 조사하였다. 잔류무르이 구조는 CF$_{x}$-polymer와 Si-C, Si-O 결합으로 이루어진 SiO$_{y}$ C$_{z}$ 이었다. CF$_{4}$O$_{2}$ 플라즈마에 의한 silicon light etch는 산화막 식각 잔류물인 SiO$_{y}$ C$_{z}$ 층과 손상된 실리콘 표면을 제거하엿으며 NH$_{4}$OH-H$_{2}$O$_{2}$과 HF용액으로 완전히 제거되는 CF$_{x}$-polymer/SiO$_{x}$층을 남겼다. 100.angs.정도의 silicon light etch는 minority carrier life time과 thermal wave signal값을 초기 웨이퍼 수준까지 회복시켰으며 접합누설 전류도 거의 습식 식각 공정수준까지 감소시켰다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.12
• /
• pp.938-944
• /
• 2008

The boiling heat transfer was experimentally investigated for the PF-5052 sprays impacting a square heated test surface in a downward direction. Full cone spray nozzles were employed for the spray cooling experiment, and experiments were made under the test conditions of Q=$3.32{\time}10^{-6}{\sim}\;12.98{\time}10^{-6}m^3/s$, ${\Delta}T_{sub}=5{\sim}25^{\circ}C$. Also, heat transfer measurements were made using the copper block of $10{\time}10mm^2$ test area heated by nine cartridge heater. From the experimental results, correlation between the Nusselt number and Reynolds number based on droplet-flow-rate was developed. The correlation shows good predictions with ${\pm}30$ % error for PF-5052.

• Journal of Sasang Constitutional Medicine
• /
• v.14 no.3
• /
• pp.160-166
• /
• 2002

A clinical case study of a shaoyangin patient diagnosed as congestive heart failure Congestive heart failure is dysfunction of heart that can't supply sufficient mount of blood required of tissue metabolism as a result of myocardial hyposystole. We treated 80 year-old female congestive heart failure patient with edema, dyspnea, chest discomfort, and dysuria. We have diagnosed her as shaoyangin(少陽人) pyohan(表寒) disease, infirmity, edema and have prescribed hyungbangjihwangtang(荊防地黃湯). In the result we had the improvement of the symptoms of CHF and general depressed condition. This report described the process and contents about the way the patient was cured.

• The Korean Journal of Financial Management
• /
• v.16 no.2
• /
• pp.365-381
• /
• 1999

본 연구는 국제 외환시장의 주요 통화들을 대상으로 조건부 이분산성을 고려한 GARCH-M 모형을 이용하여 불편기대가설과 시간변화 위험프리미엄의 존재를 규명하고 위험프리미엄 요인과 체계적 오차 요인간의 연계가능성 및 개별 외환시장의 특성과 시간변화 위험프리미엄의 변동성간의 관계를 규명하는데 목적을 두고 있다. 실증분석 결과, JPY를 제외한 DEM과 CHF, 그리고 GBP에서 불편기대가설을 지지하는 결과를 얻을 수 있었다. 또한 GBP의 경우에는 시장의 효율성과 위험프리미엄의 존재를 동시에 인정하는 일반효율성이 성립하는 것을 발견할 수 있었다. 한편 외환시장이 활성화될수록 시간변화 위험프리미엄의 변동성이 커지고 조정속도가 빨라진다는 사실도 발견할 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.188-189
• /
• 2006

차세대 반도체 공정을 위한 많은 노력 중 미세가공의 중요성이 날로 증가함에 따라 reactive ion etching (RIE)에 대한 연구 또한 그 중요성이 커지고 있다. 본 논문에서는 RIE 과정에서 etch rate과 uniformity에 영향을 줄 수 있는 요인 4가지 즉, $CHF_3$, $O_2$, chamber pressure, RF power의 변화에 대한 실험 계획법(DOE)을 통해 계획하고, 실험한 후 neural network를 통해 학습함으로서 RIE 공정상의 최적화를 모색하였다.

• Nuclear Engineering and Technology
• /
• v.34 no.4
• /
• pp.269-285
• /
• 2002

Water heat transfer experiments were carried out in a uniformly heated annulus with a wide range of pressure conditions. The local heat transfer coefficients for saturated water (low boiling have been measured just before the occurrence of the critical heat flux (CHF) along the length of the heated section. The trends of the measured heat transfer coefficients were quite different from the conventional understanding for the heat transfer of saturated flow boiling. This discrepancy was explained from the nucleate boiling in the liquid film of annular flow under high heat flux conditions. The well-known correlations were compared with the measured heat transfer coefficients. The Shah and Kandlikar correlations gave better prediction than the Chen correlation. However, the modified Chen correlation proposed in the present work showed the best agreement with the present data among correlations examined .

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.6
• /
• pp.655-663
• /
• 2010

Wettability is important to enhance not only CHF but also nucleate boiling heat transfer, as shown by the results of different kinds of boiling experiments. In this regard, an excellent boiling performance (a high CHF and heat transfer performance) could be achieved in the case of pool boiling by some favorable surface modifications that can satisfy the optimized wettability condition. To determine the optimized boiling condition, we design special heaters to examine how two materials, which have different wettabilities (e.g., hydrophilic and hydrophobic materials), affect the boiling phenomena. The special heaters have hydrophobic dots on a hydrophilic surface. The contact angle of the hydrophobic surface is $120^{\circ}$ to water at the room temperature. The contact angle of the hydrophilic surface is $60^{\circ}$ at same conditions. Experiments involving micro hydrophobic dots and two types of milli hydrophobic dots are performed, and the results are compared with a reference surface.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.490-498
• /
• 2010

HCFC-22 (chlorodifluoromethane, $CHClF_2$), one of the major components in various refrigeration, is emitted mostly from developing countries, as its consumption is not limited until 2013 by the Montreal Protocol. In addition, HFC-23 (trifluoromethane, $CHF_3$), a by-product in the manufacture of HCFC-22, is also a powerful greenhouse gas. Here, we discuss the regional emission characteristics of these compounds based on high-frequency in-situ measurements using the "Medusa" GC-MS system. HCFC-22 and HFC-23 baseline concentrations measured at Gosan (Jeju Island, Korea) from November 2007 to December 2008 increased by 1.8 ppt/yr and 0.6 ppt/yr, respectively. Pollution events of these compounds were observed, very frequently (e.g., ~2~3 times) at Gosan than baseline levels. All the measurement data were divided into four groups by simultaneously considering the ratio (HFC-23/HCFC-22) and concentration (HCFC-22) at Trinidad Head (TH, California, USA). The residence time of trajectories were then analyzed in each of the four groups. The results exhibited the existence of a strong correlation with air mass origin for each group: 1) Air masses originating from Siberia in the north and from the Pacific in the south had ratios of 0.08~0.12 and concentrations of 196.9~254.3 ppt which is highly comparable to background air at TH. 2) Air masses passing over the Southern China exhibited similar ratios but higher HCFC-22 concentrations. 3) Air masses passing over the Northern China had ratios of 0.12~0.21. 4) Air masses passing over Korea and/or Japan had ratios of 0.01~0.08. Our results suggest that the HFC-23/HCFC-22 ratio can be used as a good indicator for the assessment of the pollution with Chinese origin. We also confirmed differences in air masses traveling over Northern and Southern China, most likely due to differences in air mass travelling speed over these regions before arriving at Gosan. This signature may be treated as one of the critical components in identifying the emission sources from different parts of China.