• 한국구조물진단유지관리공학회 논문집
• /
• 제23권4호
• /
• pp.137-144
• /
• 2019

취성재료인 탄소섬유보강폴리머(CFRP)의 시편시험에서 총변형량과 유효길이로서 유도되는 환산변형률을 도입하고, 환산변형률의 장점을 기술하였다. 일반적으로 재료의 인장물성을 결정하기 위해 스트레인 게이지 측정값을 사용하지만, 취성특성을 가지는 CFRP에서는 항상 유효한 것은 아니다. 그 이유는 취성재료에서는 응력재분배를 할 수 없으며, 스트레인 게이지의 측정값은 국부거동만을 나타기 때문이다. 따라서 환산변형률은 취성재료의 인장인장특성의 평균값을 측정하고 변형률과 측정값을 검증하는 보조지표로서 효과적으로 사용될 수 있다. 또한 환산변형률은 1) 제작 오차(편차) 와 세팅 오차(정렬 불량)에 의해 발생하는 초기 내부 변형률에 기인한 영향과 2) 불균일 변형분포로 인한 부분파단 이후 거동을 명확히 가시화하는 장점이 있다.

• Structural Engineering and Mechanics
• /
• 제27권4호
• /
• pp.393-408
• /
• 2007

This paper presents the findings of an experimental study to evaluate retrofit methods which address particular weaknesses that are often found in reinforced concrete structures, especially older structures, namely the lack of the required flexural and shear reinforcement within the columns and the lack of the required shear reinforcement within the joints. Thus, the use of a high-strength fiber jacket for cases of post-earthquake and pre-earthquake retrofitting of columns and beam-column joints was investigated experimentally. In this paper, the effectiveness of the two jacket styles was also compared.

• Advanced Composite Materials
• /
• 제17권2호
• /
• pp.125-137
• /
• 2008

FBG (Fiber Bragg Grating) sensors and optical fibers were embedded into CFRP dry preforms before resin impregnation in VaRTM (Vacuum-assisted Resin Transfer Molding). The embedding location was the interface between the skin and the stringer in a CFRP-stiffened panel. The reflection spectra of the FBG sensors monitored the strain and temperature changes during all the molding processes. The internal residual strains of the CFRP panel could be evaluated during both the curing time and the post-curing time. The temperature changes indicated the differences between the dry preform and the outside of the vacuum bagging. After the molding, four-point bending was applied to the panel for the verification of its structural integrity and the sensor capabilities. The optical fibers were then used for the newly-developed PPP-BOTDA (Pulse-PrePump Brillouin Optical Time Domain Analysis) system. The long-range distributed strain and temperature can be measured by this system, whose spatial resolution is 100 mm. The strain changes from the FBGs and the PPP-BOTDA agreed well with those from the conventional strain gages and FE analysis in the CFRP panel. Therefore, the fiber-optic sensors and its system were very effective for the evaluation of the VaRTM composite structures.

• 한국지진공학회논문집
• /
• 제22권5호
• /
• pp.271-280
• /
• 2018

This paper presents a framework for developing aftershock fragility curves for reinforced concrete bridges initially damaged by mainshocks. The presented aftershock fragility is a damage-dependent fragility function, which is conditioned on an initial damage state resulting from mainshocks. The presented framework can capture the cumulative damage of as-built bridges due to mainshock-aftershock sequences as well as the reduced vulnerability of bridges repaired with CFRP pier jackets. To achieve this goal, the numerical model of column jackets is firstly presented and then validated using existing experimental data available in literature. A four-span concrete box-girder bridge is selected as a case study to examine the application of the presented framework. The aftershock fragility curves are derived using response data from back-to-back nonlinear dynamic analyses under mainshock-aftershock sequences. The aftershock fragility curves for as-built bridge columns are firstly compared with different levels of initial damage state, and then the post-repair effect of FRP pier jacket is examined through the comparison of aftershock fragility curves for as-built and repaired piers.

• Steel and Composite Structures
• /
• 제28권3호
• /
• pp.267-278
• /
• 2018

Structures may need retrofitting as a result of design and calculation errors, lack of proper implementation, post-construction change in use, damages due to accidental loads, corrosion and changes introduced in new editions of construction codes. Retrofitting helps to compensate weakness and increase the service life. Fiber Reinforced Polymer (FRP) is a modern material for retrofitting steel elements. This study aims to investigate the effect of deficiency location on the axial behavior of compressive elements of Circular Hollow Section (CHS) steel short columns. The deficiencies located vertically or horizontally at the middle or bottom of the element. A total of 43 control column and those with deficiencies were investigated in the ABAQUS software. Only 9 of them tested in the laboratory. The results indicated that the deficiencies had a significant effect on the increase in axial deformation, rupture in deficiency zone (local buckling), and decrease in ductility and bearing capacity. The damages of steel columns were responsible for resistance and stiffness drop at deficiency zone. Horizontal deficiency at the middle and vertical deficiency at the bottom of the steel columns were found to be the most critical. Using Carbon Fiber Reinforced Polymer (CFRP) as the most effective material in retrofitting the damaged columns, significantly helped the increase in resistance and rupture control around the deficiency zone.

• Composites Research
• /
• 제31권6호
• /
• pp.392-397
• /
• 2018

본 연구에서는 기존의 스틸재 타이로드를 브레이딩 공법을 적용한 탄소복합재로 개발하고자 하였다. 탄소복합재 타이로드는 기존 제품과 동등한 성능을 만족시키기 위하여 브레이딩 직조에 필요한 코어 단면설계, 코어와 탄소섬유의 접합부에 대한 구조형상설계를 진행하였다. 그리고 브레이딩 공법을 적용한 시편을 제작하여 시험평가를 통해 구조해석에 적용하였다. 제작 공정은 브레이딩 직조 후 인퓨전 공정을 거쳐 후경화 공정까지 진행하였으며 최종 제품에 대한 시험평가는 인장 시험, 비틀림 시험, 압축 시험과 피로시험을 순차적으로 진행하여 모두 만족시켰다. 또한 탄소복합재 타이로드의 중량을 기존 제품 대비 약 37% 정도 경량화시킬 수 있었다.

• 콘크리트학회논문집
• /
• 제23권3호
• /
• pp.273-280
• /
• 2011

이질 보강근의 조합 및 섬유의 혼입을 변수로 한 10개의 고강도 콘크리트 보를 제작하고 구조 실험을 수행하고 균열 후 강성, 처짐, 균열 양상, 연성에 대한 거동을 살펴보았다. 6개 부재는 철근, CFRP 보강근, GFRP 보강근의 조합으로 2단 휨 배근되었고, 4개 부재는 CFRP 보강근 혹은 GFRP 보강근으로만 2단 배근되고 강섬유 및 합성 섬유를 혼입하였다. FRP 보강근 내측에 철근을 처짐 및 균열 제어용으로 하이브리드 배근함으로써 FRP 보강근 보강 보의 낮은 강성, 큰 처짐, 낮은 연성, 깊은 균열 및 넓은 균열폭을 제어할 수 있었다. 또한, 섬유의 혼입을 통해 FRP 보강근 보강 보의 빠르고 깊은 균열이 제어되고 연성 및 내하력이 향상되었다. 섬유 혼입된 FRP 보강근 보강 콘크리트 부재 설계 시 섬유 혼입에 의해 증가된 콘크리트의 극한 압축 변형률에 대한 고려가 필요함을 알 수 있었다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.41-44
• /
• 2001

Mechanical test of the Carbon Fiber Reinforced Plastics (CFRP) composite specimen was performed based on the ASTM code at the ambient and low temperature. Tension, compression in-plane shear, and inter-laminar shear properties of the composite laminates were evaluated experimentally using the Universal Testing Machine(UTM) system at the temperature of $24^{\circ}C$,$-76^{\circ}C$ , and $-196^{\circ}C$. From the test results it was found that the CFRP chosen for the Korea Superconducting Tokamak Advanced Research(KSTAR) magnet supporting post had smaller tensile strength and larger compressive strength at the low temperature than those of the ambient temperature because of material ductility.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권2호
• /
• pp.117-124
• /
• 2007

본 연구에서 내부 공간을 확장시키기 위한 평면확장형 공동주택 리모델링에 있어서 기존 슬래브와 신규 슬래브 접합부의 횡방향 하중 전달 성능을 평가하기 위한 실험을 수행하였다. 슬래브의 접합연결재로 후 매립 Dowel 철근을 사용하였다. 기존 슬래브는 철거 예정인 기존 아파트로부터 채취하였으며, 휨성능을 향상시키기 위하여 탄소판(CFRP)으로 보강하였다. 실험결과로부터 후 매립 Dowel 철근으로 접합된 접합부 실험체가 최종파괴 시까지 완전합성거동을 하는 것을 확인하였으며, 충분한 극한성능 및 사용성능을 확보하고 있음을 알 수 있었다.

• International Journal of Concrete Structures and Materials
• /
• 제9권3호
• /
• pp.345-367
• /
• 2015

Past earthquakes have signaled the increased collapse vulnerability of mainshock-damaged bridge piers and urgent need of repair interventions prior to subsequent cascading hazard events, such as aftershocks, triggered by the mainshock (MS). The overarching goal of this study is to quantify the collapse vulnerability of mainshock-damaged substandard RC bridge piers rehabilitated with different repair jackets (FRP, conventional thick steel and hybrid jacket) under aftershock (AS) attacks of various intensities. The efficacy of repair jackets on post-MS resilience of repaired bridges is quantified for a prototype two-span single-column bridge bent with lap-splice deficiency at column-footing interface. Extensive number of incremental dynamic time history analyses on numerical finite element bridge models with deteriorating properties under back-to-back MS-AS sequences were utilized to evaluate the efficacy of different repair jackets on the post-repair behavior of RC bridges subjected to AS attacks. Results indicate the dramatic impact of repair jacket application on post-MS resilience of damaged bridge piers-up to 45.5 % increase of structural collapse capacity-subjected to aftershocks of multiple intensities. Besides, the efficacy of repair jackets is found to be proportionate to the intensity of AS attacks. Moreover, the steel jacket exhibited to be the most vulnerable repair intervention compared to CFRP, irrespective of the seismic sequence (severe MS-severe or moderate AS) or earthquake type (near-fault or far-fault).