• 한국공작기계학회논문집
• /
• 제12권4호
• /
• pp.43-49
• /
• 2003

This research work has been carried out for finding J-integral in mode II of CFRP(carbon fiber reinforced plastics) laminate plates based on the classical bar theory in dynamic conditions with consideration of the effect of inertia forces, eventually to lead to finding the dynamic inter-layer fracture toughness. Dynamic inter-layer fracture toughness was found by a self-made ENF(End Notched Flexure) experimental apparatus using Split Hopkinson's Bar(SHPB), and also observed the variation of the fracture toughness haying different resin contents and fiber arrangements of CFRP specimen([$0_3^{\circ}/90_3^{\circ}/0_6^{\circ}/90_3^{\circ}/0_3^{\circ}$], [$0_{20}^{\circ}$], [$0_5^{\circ}/90_{10}^{\circ}/0_5^{\circ}$]). As an experimental result, in either cases of quasi-static or dynamic load condition, the critical load and the inter-layer fracture toughness increased sharply depending on the increase of resin contents. Therefore, it could, be concluded that the effect by resin contents is the major factor determining the inter-layer fracture toughness in the CFRP laminate plates.

• 한국정밀공학회지
• /
• 제34권2호
• /
• pp.95-99
• /
• 2017

The recent development of core techniques in the IT industry can be summarized as a technical advancement for safety and convenience, and mechanical technology for being "eco-friendly" and lightweight. Under these circumstances, research of lightweight material has become attractive. In this study, CFRP (Carbon Fiber Reinforced Plastic) laminate specimens are subjected to a tensile test using the UTM(Universal Testing Machine, AG-IS 100 kN) to estimate their mechanical properties in terms of the Hole machining impact evaluation. The FEM (Finite Elements Method) analysis method is applied and the material properties obtained from basic experiments such as the Tensile test, the compressive test, and the shear test. CFRP materials properties from a previous study, as well as a finite element analysis program for Hole machining CFRP was compared with the experiments.

• 한국항공우주학회지
• /
• 제50권5호
• /
• pp.309-316
• /
• 2022

본 논문에서는 14개의 다른 적층을 갖는 CFRP 적층판의 강도를 비선형 수치해석으로 계산하고 시험 결과와 비교하였다. 복합재 적층판 쿠폰은 일방향 테이프로 만들어진 프리프레그를 오토클레이브에서 경화하여 제작하였다. 라미나 시험으로 획득한 메트릭스의 비선형 특성을 해석에 고려하였다. Hashin 파손조건과 점진적 손상모델을 사용하여 비선형 유한요소 해석을 수행하였다. 비교 결과 본 논문의 접근 방법이 다양한 적층을 갖고, 손상이 없는 CFRP 적층판의 인장강도를 예측할 수 있음을 보여주었다. 그러나 구멍이 있는 적층판 시편의 강도 예측에는 부적합하였다.

• 대한기계학회논문집A
• /
• 제28권4호
• /
• pp.443-452
• /
• 2004

In recent year, composite materials are increasingly used in various fields of engineering because of its superior properties. The relationships of between crack propagation and AE characteristics fer CFRP plain woven laminate composites are examined. AE signals are measured during the fracture behavior tests. The purpose of study is to estimate the crack extension behavior with AE characteristics according to the load orientation fur plain woven CFRP laminate composite.

• Advanced Composite Materials
• /
• 제17권4호
• /
• pp.359-372
• /
• 2008

The moisture absorption behavior of carbon fiber-reinforced plastic (CFRP) and its effect on dimensional stability were examined. Moisture diffusivity in CFRP was determined by measuring a specimen's weight during the moisture absorption test. Three types of CFRP specimens were prepared: a unidirectionally reinforced laminate, a quasi-isotropic laminate and woven fabric. Each CFRP was processed into two geometries - a thin plate for determination of diffusivity and a rod with a square cross-section for the discussion of two-dimensional diffusion behavior. By solving Fick's law expanded to 3 dimensions, the diffusivities in the three orthogonal directions were obtained and analyzed in terms of the anisotropy of CFRP moisture diffusion. Coefficients of moisture expansion (CMEs) were also obtained from specimen deformation caused by moisture absorption. During moisture absorption, the specimen surfaces showed larger deformation near the edges due to the distribution of moisture contents. This deformation was reasonably predicted by the finite element analysis using experimentally determined diffusivities and CMEs. For unidirectional CFRP, the effect of the fiber alignment on CME was analyzed by micromechanical finite element analysis (FEA) and discussed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.26-36
• /
• 2001

Smart sensors and actuators have recently been developed. In this study, first, small-diameter fiber Bragg grating (FBG) sensors developed by the author, whose cladding and polyimide coating diameters were 40 and $52{\mu}m$, respectively, were embedded inside a laminate without resin-rich regions around sensors and the deterioration of mechanical properties of the composite laminate. The small-diameter FBG sensor was embedded in $0^{\circ}$ ply of a CFRP laminate for the detection of transverse cracks in $90^{\circ}$ ply of the laminate. The reflection spectra from the FBG sensor were measured at various tensile stresses. The spectrum became broad and had some peaks with an increase of the transverse crack density. Furthermore, the theoretical calculation reproduced the change in the spectrum very well. These results show that the small-diameter FBG sensors have a potential to detect the occurrence of transverse cracks through the change in the form of the spectrum, and to evaluate the transverse crack density quantitatively by the spectrum width. On the other hand, shape memory alloy (SMA) films were used to suppress the initiation and growth of transverse cracks in CFRP laminates. Pre-strained SMA films were embedded between laminas in CFRP laminates and then heated to introduce the recovery stress in SMA films and compressive stresses in the weakest plies ($90^{\circ}$ ply). The effects of recovery stresses are demonstrated in the experiments and well predicted using the shear-lag analysis and the nonlinear constitutive equation of SMA films.

• 한국안전학회지
• /
• 제14권3호
• /
• pp.12-17
• /
• 1999

In this study, a drop-weight impact tester was manufactured to assess the strength of CFRP laminate plates. The tests were conducted on several laminates of different ply orientation. A system for the impact strength of CFRP laminates was made considering stress wave propagation theory using drop-weight impact tester as one of impact test. Results indicate that absorbed energy of quasi-isotropic specimen, haying four interfaces is higher than that of orthotropic laminates with two interfaces. Absorbed energy in the specimen that ply number, interface number and fiber stacking sequences is same but having hybrid is higher than that of orthotropic laminates without hybrid.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.744-747
• /
• 2001

This paper shows shear wave behavior of CFRP composite laminates as a polar grid form to evaluate vibration pattern of ultrasonic transducers, which gives measured modelling fundamental contents of nondestructive evaluation. Polarized direction can be obtained by using a c-scanner and sensitivity of transducers is founded when using through-transmission method of two transducers. And modelling of vector decomposition is presented based on ply-to-ply method to apply practicable nondestructive evaluation of CFRP laminate lay up. This modelling decomposes the transmission of linearly polarized wave into orthogonal components through each ply of a laminate. It is found that a high provable shows between the model and experimental developed in characterizing layup of CFRP composite laminates.

• 한국융합학회논문지
• /
• 제9권12호
• /
• pp.175-180
• /
• 2018

본 연구에서는 CFRP를 적층각도 45도로 제작하고 구조용 접착제로 접착된 TDCB(Tapered Double Cantilever Beam) 시험편을 CATIA로 설계를 하였고, 유한요소해석 프로그램인 ANSYS를 이용하여 해석을 진행하였다. 연구 모델은 영국 산업 및 ISO 표준에 기초하여 설계하였으며, 모델 형상의 각도에 따라서 형상계수(m)를 변수로 설정하였다. 본 논문의 연구 결과로서, 모든 해석 시험편들 중에서 $4^{\circ}$ 인 경사 각도를 가진 시험편에서 최대 변형량은 12.628mm로 가장 높았으며 $8^{\circ}$에서 12.352mm으로 가장 낮은 값을 각각 보였다. 또한, 최대등가응력은 그 각도가 $6^{\circ}$에서 9210.3MPa가장 높았으며 $8^{\circ}$에서 4800.5MPa로 가장 낮은 값을 각각 보였다. 본 연구 결과를 통하여 CFRP로 제작된 적층각도를 가진 TDCB 구조물의 파손데이터를 확보할 수 있었으며, 본 연구결과를 토대로 얻은 CFRP로 접착된 TDCB 구조물의 파손데이터를 활용함으로서 실생활에서의 기계나 구조물에 융합하여 그 미적 감각을 나타낼 수 있다.

• 한국융합학회논문지
• /
• 제10권5호
• /
• pp.165-171
• /
• 2019

오늘날 공학과 기술은 스포츠 분야에 많은 영향을 미치고 있다. 스포츠의 속성인 경쟁은 스포츠선수 뿐만이 아니라 스포츠용품에 있어서도 보다 높은 성능을 요구하게 된다. 특히 모터스포츠분야는 성능과 안전이라는 측면에서 오래전부터 스포츠와 기술의 융합이 자연스럽게 이루어지고 있다. 본 연구에서는 모터스포츠와 일반 자동차튜닝 시장을 겨냥한 카본 버킷 시트(Bucket seat)의 개발을 위하여 유한요소해석을 통해 구조강도 평가를 시행하였다. FIA($F\acute{e}d\acute{e}ration$ Internationale de l'Automobile)의 규정을 기본 설계와 강도평가에 적용하였으며, 복합소재의 특성을 고려한 유한요소 모델링과 CFRP 라미네이트(Carbon Fiber Reinforced Plastic Laminate)의 적층각도와 적층수에 따른 시트의 강도를 Tsai-Wu Failure index를 구하여 평가하였다. 해석 결과 3mm의 폼코어를 적용한 $[0^{\circ}/30^{\circ}/60^{\circ}/90^{\circ}/-30^{\circ}/-60^{\circ}]_4$인 적층이 다른 실험조합에 비하여 무게와 강도 면에서 만족할 만한 성능을 나타내고 있어 최적 적층으로 선정하였다.