• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.33-34
• /
• 2006

The most bottleneck of development of automation excavator system is the making mathematical linear model. Because of non-linear of control circuit, cylinder, join in hydraulic circuit, and heavy loading so on. Therefore, whatever robust controller is designed, real experimentation is necessary. But, a real experimentation has many risks. The excavator is expensive and large size. Therefore a development of experimentation system is difficult and not safe. Specially, there have a difficulty, because of big noise. So, on experimentation is difficult in school. Manufacturing pneumatic excavator modeland using system identification, design a system transfer function in this paper. Also, planning m-PID Controller using CDM, and examining usefulness applied to actuality model.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.11
• /
• pp.1795-1806
• /
• 2018

Objective: The study was designed to establish choline deficiency model (CDM) in broilers for evaluating efficacy of polyherbal formulation (PHF) in comparison with synthetic choline chloride (SCC). Methods: A total of 2,550 one-day-old Cobb 430 broiler chicks were randomly assigned to different groups in three experiments. In experiment 1, G1 and G2 served as normal controls and were fed a basal diet with 100% soybean meal (SBM) as a major protein source supplemented with and without SCC, respectively. In G3, G4, G5, and G6 groups, SBM was replaced at 25%, 50%, 75%, and 100% by soy protein isolate (SPI) to induce a graded level of choline deficiency. In experiment 2, PHF (500 and 1,000 g/ton) in comparison with SCC (1,000 g/ton) were evaluated. In experiment 3, dose-response of PHF (200, 400, and 500 g/ton) with SCC (400 g/ton) was determined. Results: Replacement of SBM by SPI produced a linear decrease in body weight gain (BWG) with a poor feed conversion ratio (FCR). 25% SBM replacement by SPI yielded an optimum negative impact on BWG and FCR; hence, it is considered for further studies. In experiment 2, PHF (500 and 1,000 g/ton) and SCC (1,000 g/ton) showed a similar performance in BWG, FCR and relative liver weight. In experiment 3, PHF produced an optimum efficacy at 400 g/ton and was comparable to SCC in the restoration of serum aspartate aminotransferase activity, abdominal fat, breast muscle lipid content and liver histopathological abnormalities. Conclusion: Replacement of SBM by SPI caused choline deficiency characterised by worsening of BWG, FCR, elevation in liver enzymes and histopathological changes indicating fatty liver. CDM was found valid for evaluating SCC and PHF. It is concluded that PHF has the potential to mimic biological activities of SCC through the restoration of negative effects caused by CDM.

• International Commerce and Information Review
• /
• v.7 no.4
• /
• pp.157-177
• /
• 2005

In many countries, a Single Window system for simplifications is establishing in order to reduce works submitted double data and compliance costs. A Single Window is defined as a facility that allows parties involved in trade and transport to lodge standardized information and documents with a single entry point to fulfil all import, export, and transit-related regulatory requirements. A Single window can bring improved level of security, faster clearance and reduced compliance costs. UN/CEFACT released "Recommendation and Guidelines on establishing a Single Window to enhance the efficient exchange of information between trade and government". Also, WCO has made progress several projects to assist effective establishing a single window, i.e. CDM, UCR, ICT. Korea has being established a single window system, "e-trade platform" connected with trade, clearance, logistics, marketing and payment system. Some suggestions to establish a effective single window system in Korea are as follows. Firstly, it is necessary to clearly define roles and responsibilities of a lead agency in a single window system and form a organic relationship with PGA. Secondly, a single window system has to be progressed by stages, namely, customs clearance portal system should be established first, and later established e-trade platform. Lastly, the Korean government has to take part in CDM project to gain an advantage over other countries.

• Computers and Concrete
• /
• v.6 no.4
• /
• pp.319-341
• /
• 2009

A new formulation based on lumped plasticity and inelastic hinges is presented in this paper for nonlinear analysis of Reinforced Concrete (RC) frame structures. Inelastic hinge behaviour is described using the principles of Continuum Damage Mechanics (CDM). Member formulation contains provisions to model stiffness degradation due to cracking of concrete and yielding of reinforcing steel. Depending on its nature, cracking is classified as concentrated or distributed. Concentrated cracking is accounted through a damage variable and its growth is defined based on strain energy principles. Presence of distributed flexural cracks in a member is taken care of by modelling it as non-prismatic. Plasticity theory supported by effective stress concept of CDM is applied to describe the post-yield response. Nonlinear quasi-static analysis is carried out on a RC column and a wide two-storey RC frame to verify the formulation. The column is subjected to constant axial load and monotonic lateral load while the frame is subjected to only lateral load. Computed results are compared with those due to experiments or other numerical methods to validate the performance of the formulation and also to highlight the contribution of distributed cracking on global response.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2240-2245
• /
• 2003

In this paper, the controller design by coefficient diagram method (CDM) for controlling the trolley position, load-swing angle and hoisting rope length of the overhead crane system simultaneously is proposed. The overhead crane system is a MIMO system consisting of two inputs and three outputs. Its mathematical model is nonlinear with coupling characteristics. This nonlinear model can be approximated to obtain a linear model where the first input mainly affects the trolley position and the load-swing angle while the second input mainly affects the hoisting rope length. In order to utilize the CDM concept for assigning the controllers, namely PID, PD and PI controllers separately, the model is approximated to be three transfer functions in accordance with trolley position, the load-swing angle and the hoisting rope length controls respectively. The satisfied performances of the overhead crane system controlled by the these controllers and fast rejection of the disturbance effect occurred at the trolley position are shown by simulation and experimental results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1501-1518
• /
• 2016

This paper presents an effective management of VM (Virtual Machine) for heterogeneous cloud using Common Deployment Model (CDM) brokering mechanism. The effective utilization of VM is achieved by means of task scheduling with VM placement technique. The placements of VM for the physical machine are analyzed with respect to execution time of the task. The idle time of the VMis utilized productively in order to improve the performance. The VMs are also scheduled to maintain the state of the current VM after the task completion. CDM based algorithm maintains two directories namely Active Directory (AD) and Passive Directory (PD). These directories maintain VM with proper configuration mapping of the physical machines to perform two operations namely VM migration and VM roll back. VM migration operation is performed from AD to PD whereas VM roll back operation is performed from PD to AD. The main objectives of the proposed algorithm is to manage the VM's idle time effectively and to maximize the utilization of resources at the data center. The VM placement and VM scheduling algorithms are analyzed in various dimensions of the cloud and the results are compared with iCanCloud model.

• Journal of the Korean Society of Safety
• /
• v.17 no.4
• /
• pp.94-100
• /
• 2002

As the use of automatic handling equipment for sensitive semiconductor devices is rapidly increased, manufacturers of electronic components and equipments need to be more alert to the problem of electrostatic discharges(ESD). In order to analyze damage characteristics of semiconductor device damaged by ESD, this study adopts a new charged-device model(CDM), field-induced charged model(FCDM) simulator that is suitable for rapid, routine testing of semiconductor devices and provides a fast and inexpensive test that faithfully represents ESD hazards in plants. High voltage applied to the device under test is raised by the field of non-contacting electrodes in the FCDM simulator, which avoids premature device stressing and permits a faster test cycle. Discharge current and time are measured and calculated. The characteristics of electrostatic attenuation of domestic semiconductor devices are investigated to evaluate the ESD phenomena in the semiconductors. Also, the field charging mechanism, the device thresholds and failure modes are investigated and analyzed. The damaged devices obtained in the simulator are analyzed and evaluated by SEM. The results obtained in this paper can be used to prevent semiconductor devices form ESD hazards and be a foundation of research area and industry relevant to ESD phenomena.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2238-2249
• /
• 2015

The purpose of this study is to analyze the relations of innovation and productivity following the introduction of ICT and the effects in the process of innovative investments activity-innovation-productivity, not only by finding causes and effects. For this purpose we conducted surveys of SMEs classified into 7 categories by type of business. To put it concretely, this study was performed to find out the foactors which allow companies to secure competitiveness by enhancing of innovative measures through ICT, and to further analyze the political implications for the development of small and medium-size business by conducting an empirical analysis of the process, from the determination of innovative investments all the way through to production. Analysis model used CDM model using econometric methods such as multiple regression analysis and multinominal logit analysis to produce results. Also we established and analyzed models of innovation investment determinants, innovation determinants and productivity determinants to analyze specifically the relations between ICT and productivity.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.3
• /
• pp.183-192
• /
• 2009

ADESS(Adverse drug event surveillance system) is the system which distinguishes adverse drug events using adverse drug signals. This system shows superior effectiveness in adverse drug surveillance than current methods such as volunteer reporting or char review. In this study, we built clinical data mart(CDM) for the development of ADESS. This CDM could obtain data reliability by applying data quality management and the most suitable clustering number(n=4) was gained through the reproducibility assessment in unsupervised learning techniques of knowledge discovery. As the result of analysis, by applying the clustering number(N=4) K-means, Kohonen, and two-step clustering models were produced and we confirmed that the K-means algorithm makes the most closest clustering to the result of adverse drug events.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.6
• /
• pp.841-849
• /
• 2023

Corallina pilulifera (CP) is prevalent along the Korean coastline and belongs to the Corallinaceae family, exhibiting growth throughout all seasons. This study confirmed the role of calcium supplementation through CP, calcined CP (CCP), and a commercial calcium powder, highlighting variations in dosage within animal models induced by a calcium-deficient diet. Analysis of calcium absorption was conducted by assessing the serum and urine calcium levels during the feeding periods. Serum calcium content was significantly higher in the control group (CON, 9.79 mg/dL) than in the calcium-deficient model (CDM, 6.15 mg/dL). The calcium content of urine was significantly higher than that of CON (0.20 mg/dL) compared with CDM (0.08 mg/dL). Reticular bone thickness showed no significant differences between the CON and CDM groups. Additionally, micro-CT results demonstrated a reduction in the trabecular volume and a significant difference between the number of strands and the average interval of the reticular bone. In conclusion, CP serves as a promising source of calcium supplementation. Therefore, these findings emphasize that CP is of sufficient value as an industrial material related to calcium metabolism.