• 한국정보전자통신기술학회논문지
• /
• 제14권2호
• /
• pp.122-127
• /
• 2021

본 논문은 ITO 유리를 기판으로 사용하여 CdS 박막을 제작하였다. MDS (Multiplex Deposition Sputter System)을 이용하여 RF power와 증착시간을 변화시키면서 소자를 제작하였다. 제작된 시편은 광학적 특성에 대해 분석을 하였다. 본 논문의 목적은 태양전지의 광흡수층에 적용될 수 있는 제작조건을 찾는 것이다. RF power가 50W이고 증착 시간이 10분 일 때, 두께는 64Å로 측정되었다. 100W일?, 두께는 406Å로 측정되었고, 150W일 때는 두꼐는 889Å로 측정되었다. 박막은 RF power가 증가할수록 두께가 증가되는 것을 확인하였다. 광투과율 측정한 결과, 550~850nm는 RF power가 50W, 100W, 150W일 때 모두 투과율이 대략 70% 이상으로 관찰되었다. RF power가 증가되면 두께가 증가되고 입자 크기가 커지므로 박막의 밀도가 증가되어 광투과율이 감소되었다. RF power를 100W로 하고 증착시간을 15분 일 때, 밴드갭은 3.998eV로 계산되었다. 증착시간을 20분일 때, 3.987eV이고 150W는 15분에서는 3.965eV이며 20분에서는 3.831eV이다. RF power가 증가하면 밴드갭이 증가하는 것으로 측정되었다. XRD 분석에서 RF power와 증착시간의 변화에 관계없이 2Θ=26.44에서의 회절 피크를 관찰할 수가 있었다. 반치폭은 증착시간이 증가하면 감소되는 것을 알 수가 있었다. 그리고 RF power를 일정하게 하고 증착시간을 증가하면 입자크기는 증가되는 것으로 측정되었다.

• 지질공학
• /
• 제20권1호
• /
• pp.79-87
• /
• 2010

본 연구지역에서 2009년 3월부터 9월 사이에 5개 지점(배경수(BW), 산성광산배수(AMD0, AMD1, AMD2, AMD3))에서 수온, pH, Eh, EC, DO 성분 등이 현장에서 6회 관측되었으며, 폐광산 갱내 출구부(AMD0) 지점에서는 유량이 측정되었다. 일광 폐광산에서 유출되는 산성광산배수는 pH 3 이하의 강산성수이며, Eh 성분은 400~600 mV의 범위이었다. 산성광산배수의 EC 값은 주변 배경수에 비해 10배 이상 높았으며, DO 성분은 유출지점 하류부로 갈수록 대기와의 접촉을 통해 그 값이 증가되었다. 산성광산배수 내 중금속 이온의 농도는 Fe > Cu > Zn > Mn > As > Cd 순이었으며, Fe 성분의 농도가 81.870~474.30 mg/L 로서 가장 높았다. 중금속 성분별 최대농도 관측시기는 5월(As, Cd), 6월(Fe), 7월(Cu, Zn, Mn) 이었으며, 최소농도는 4월(Cd, Mn)과 9월(Fe, Cu, Zn, As)에 관측되었다. 산성광산배수에 용존된 중금속의 유출질량은 Fe 성분 53.44 kg, Cu 성분 6.25 kg, Zn 성분 5.26 kg, Mn 성분 2.13 kg, As 성분 0.14 kg, Cd 성분 0.04 kg 정도이었다. 폐광산에서 갱내에서 1일 동안 유출되는 6개 중금속의 전체 질량은 67.26 kg 이었으며, Fe 성분이 전체 유출질량의 79% 정도를 차지하고 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.3043-3047
• /
• 2012

To investigate the scattering layer effect of a $TiO_2$ multilayer in dye-sensitized solar cells (DSSCs), we designed a new DSSC system, assembled with a CdS-$TiO_2$ scattering layer electrode. A high-magnification SEM image exhibited hollyhock-like particles with a width of 1.5-2.0 ${\mu}m$ that were aggregated into 10-nm clumps in a hexagonal petal shape. The efficiency was higher in the DSSC assembled with a CdS-$TiO_2$ scattering layer than in the DSSC assembled with $TiO_2$-only layers, due to the decreased resistance in electrochemical impedance spectroscopy (EIS). The short-circuit current density ($J_{sc}$) was increased by approximately 7.26% and the open-circuit voltage ($V_{oc}$) by 2.44% over the 1.0 wt % CdS-$TiO_2$ composite scattering layer and the incident photon-to-current conversion efficiency (IPCE) in the maximum peak was also enhanced by about 5.0%, compared to the DSSC assembled without the CdS-$TiO_2$scattering layer.

• 자원환경지질
• /
• 제44권5호
• /
• pp.359-372
• /
• 2011

통가열도의 남단에 위치하는 TA26 해저산은 열수활동이 가장 활발한 것으로 알려진 해저산으로 열수플룸이 광범위하게 존재하며 열수광석 및 열수변질암이 채취된 지역이다. 이 지역에서 채취한 암석들은 현무암내지 현무암질 안산암이다. 열수용액에 의한 변질암석시료에서는 사장석, 휘석류, 황철석, 티탄철석, 비결정질 살리카, 중정석, 녹점토, iron sulfates, Fe-Si sulfates 및 Fe silicates 등이 산출된다. 모암변질시 열수작용에 의한 변질 암석의 주원소, 미량원소 및 희토류원소 이득 및 손실을 계산하면, $K_2O$(+0.04~+0.45 g), $SiO_2$(-6.52~+10.56 g), $H_2O$(-0.03~+6.04 g), $SO_4$(-0.46~+17.54 g), S(-0.46~+13.45 g) 및 총 S(-0.51~+16.93 g)들이 모암변질시 이득되었다. 또한 미량원소들 중 특히 Ba(-7.60~+185078.62 g), Sr(-36.18~+3033.08 g), Ag(+54.83 g), Au(+1467.49 g), As(-5.80~+1030.80 g), Cd(+249.78 g), Cu(-100.57~+1357.85 g), Pb(+4.91~+532.65 g), Sb(-0.32~+66.59 g), V(-113.58~+102.94 g), 및 Zn(-49.56~+14989.92 g)들이 모암변질시 이득되었다. 따라서 이득된 주원소 및 미량원소의 종류 및 함량($K_2O$, $H_2O$, $SO_4$, S, 총 S, Ba, Sr, Ag, Au, As, Cd, Cu, Pb, Sb, V, Zn) 등을 지시원소로서 활용하면 통가열도 심해저 열수광상 탐사시 유용하게 이용될 수 있다.

• Biomolecules & Therapeutics
• /
• 제25권4호
• /
• pp.411-416
• /
• 2017

Paclitaxel (PTX) is a effectively chemotherapeutic agent which is extensively able to treat the non-small cell lung, pancreatic, breast and other cancers. But it is a practically insoluble drug with water solubility less than $1{\mu}g/mL$, which restricts its therapeutic application. To overcome the problem, hyaluronic acid-complexed paclitaxel nanoemulsions (HPNs) were prepared by ionic complexation of paclitaxel (PTX) nanoemulsions and hyaluronic acid (HA) to specifically target non-small cell lung cancer. HPNs were composed of ${\small{DL}}-{\alpha}$-tocopheryl acetate, soybean oil, polysorbate 80, ferric chloride, and HA and fabricated by high-pressure homogenization. The HPNs were $85.2{\pm}7.55nm$ in diameter and had a zeta potential of $-35.7{\pm}0.25mV$. The encapsulation efficiency was almost 100%, and the PTX content was 3.0 mg/mL. We assessed the in vivo antitumor efficacy of the HPNs by measuring changes in tumor volume and body weight in nude mice transplanted with CD44-overexpressing NCI-H460 xenografts and treated with a bolus dose of saline, $Taxol^{(R)}$, PTX nanoemulsions (PNs), or HPNs at a dose of 25 mg/kg. Suppression of cancer cell growth was higher in the PN- and HPN-treated groups than in the $Taxol^{(R)}$ group. In particular, HPN treatment dramatically inhibited tumor growth, likely because of the specific tumor-targeting affinity of HA for CD44-overexpressed cancer cells. The loss of body weight and organ weight did not vary significantly between the groups. It is suggest that HPNs should be used to effective nanocarrier system for targeting delivery of non-small cell lung cancer overexpressing CD44 and high solubilization of poorly soluble drug.

• 동의생리병리학회지
• /
• 제18권1호
• /
• pp.157-166
• /
• 2004

In order to understand the anti-carcinogenic effects of Boo-jung-bae-bon-bang(扶正培本方)-B1), Hwal-hyul-hwa-eo-bang(活血化瘀方-B2), Cheong-youl-hae-dok-bang(淸熱解毒方-B3), prescriptions of individual B1, B2, and B3 treatments or combined treatments (B4; B1+B2, B5; B1+B3, B6; B1+B2+83, B7; B2+83) were applied to cultured cancer cell lines. The major findings on their anti-cardnogenic effects in terms of mechanism and synergistic interactions are summarized below. Results of cytokine gene expression analyses are summarized as follows; IL-2 gene expression was increased by B1 and B6 treatments, IFN-v gene expression increased by B3, B1, B6, and 85, and CD28 gene expression increased by B1 and B5. IL-4 expression was not affected by any treatments. In the FACS analysis, increases in numbers of immunoreactive CD3/sup +//CD25/sup +/ T cells by B1 and B5 treatment, CD3/sup +//CD69/sup +/ T cells by B1, B3, B5, and B6 treatments, CD19/sup +//CD44/sup +/ B cells by B1 and B6 treatments were observed when compared to the corresponding non-treated control groups.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1605-1610
• /
• 2017

The electrochemical luminescence (ECL) device was investigated, which has similar structure to the dye-sensitized solar cell. The structure of the ECL cell in this experiment reliably induces a large amount of the oxidation around electrodes. The band gap of the ECL electrode is of 3.0 - 3.2 eV. Titanium dioxide ($TiO_2$) nanoparticle has following properties: a band gap of 3.4 eV, a low-priced material, and 002 preferred orientation (Z-axis). Zinc Oxide (ZnO) nanorod is easy to grow in a vertical direction. In this paper, in order to determine material suitable for the ECL device, the properties of various materials for electrodes of ECL devices such as ZnO nanorod (ZnO-NR) and $TiO_2$ nanoparticle ($TiO_2-NP$) were compared. The threshold voltage of the light emission of the ZnO-NR was 2.0 V which is lower than 2.5 V of $TiO_2-NP$. In the other hand, the luminance of $TiO_2-NP$ was $44.66cd/m^2$ and was higher than that of $34cd/m^2$ of ZnO-NR at the same applied voltage of 4 V. Based on the experimental results, we could conclude that $TiO_2-NP$ is a more suitable electrode material in ECL device than the ZnO-NR.

• Korean Journal of Radiology
• /
• 제25권5호
• /
• pp.473-480
• /
• 2024

We systematically reviewed radiological abnormalities in patients with prolonged SARS-CoV-2 infection, defined as persistently positive polymerase chain reaction (PCR) results for SARS-CoV-2 for > 21 days, with either persistent or relapsed symptoms. We extracted data from 24 patients (median age, 54.5 [interquartile range, 44-64 years]) reported in the literature and analyzed their representative CT images based on the timing of the CT scan relative to the initial PCR positivity. Our analysis focused on the patterns and distribution of CT findings, severity scores of lung involvement on a scale of 0-4, and the presence of migration. All patients were immunocompromised, including 62.5% (15/24) with underlying lymphoma and 83.3% (20/24) who had received anti-CD20 therapy within one year. Median duration of infection was 90 days. Most patients exhibited typical CT appearance of coronavirus disease 19 (COVID-19), including ground-glass opacities with or without consolidation, throughout the follow-up period. Notably, CT severity scores were significantly lower during ≤ 21 days than during > 21 days (P < 0.001). Migration was observed on CT in 22.7% (5/22) of patients at ≤ 21 days and in 68.2% (15/22) to 87.5% (14/16) of patients at > 21 days, with rare instances of parenchymal bands in previously affected areas. Prolonged SARS-CoV-2 infection usually presents as migrating typical COVID-19 pneumonia in immunocompromised patients, especially those with impaired B-cell immunity.

• 한국세라믹학회지
• /
• 제44권6호
• /
• pp.303-307
• /
• 2007

Transparent In-doped zinc oxide (IZO) thin films are deposited with variation of pulsed DC power at Ar atmosphere on coming 7059 glass substrate by pulsed DC magnetron sputtering. A c-axis oriented IZO thin films were grown in perpendicular to the substrate. The optical transmittance spectra showed high transmittance of over 80% in the UV-visible region and exhibited the absorption edge of about 350 nm. Also, the IZO films exhibited the resistivity of ${\sim}10^{-3}{\Omega}\;cm$ and the mobility of ${\sim}6cm/V\;s$. Organic Light-emitting diodes (OLEDs) with IZO/N,N'-diphenyl-N, N'-bis(3-methylphenl)-1, 1'-biphenyl-4,4'-diamine (TPD)/tris (8-hydroxyquinoline) aluminum ($Alq_3$)/LiF/Al configuration were fabricated. LiF layer inserted is used as an interfacial layer to increase the electron injection. Under a current density of $100\;mA/cm^2$, the OLEDs show an excellent efficiency (9.4 V turn-on voltage) and a good brightness ($12000\;cd/m^2$) of the emission light from the devices. These results indicate that IZO films hold promise for anode electrodes in the OLEDs application.

• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.40-44
• /
• 2017

The effect of weak dielectric silicone dioxide($SiO_2$) embedded in polyfluorene(PFO) emitting layer of polymer-based multi structure OLED was investigated. Indium tin oxide(ITO)/poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS)/poly(9,9-di-n-octylfluorenyl-2,7-diyl)(PFO)/2,2,2"-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi)/aluminum(Al) structure OLED was fabricated by spin-coating method. Applied electric field causes some effect on $SiO_2$ in PFO layer. Thus, interaction between polymers and affected $SiO_2$ might generate electrical and luminance properties change. Experimental results, show the reduced threshold voltage of 6 V(from 23 V to 17 V). The maximum current density was rather increased from $71A/m^2$ to $610A/m^2$ and maximum brightness was also increased from $7.19cd/m^2$ to $41.03cd/m^2$, 9 and 6 times each. Additionally we obtained colour broadening result due to the increasing of blue-green band emission. Consequently we observed that electrical and luminance properties are enhanced by adding $SiO_2$ and identified the possibility of controlling the emission colour of OLED device according to colour broadening.