• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.331-332
• /
• 2007

This Paper deals with the high sensitive camera circuit design, which is more sensitive than those on the market now in a way that it got rid of chronic smearing problem in CCD sensor and other kinds of noises in video signal effectively. This paper focused on the principle of CCD and video signal process and analyzed the specialized technique of industry and fundamental high sensitivity of CCTV camera. 1 also looked into the SONY super-HAD CCD camera which is very popular in the field now and compared this with the SONY EXview CCD camera to analyze the picture improvement using video test equipment. For the result, it had 190mv on camera sensitivity, 14dB on smearing, and 2dB on signal to noise ratio.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.488-491
• /
• 2003

Biochip-based diagnostic technology is an effective, time- and money- saving way. But, biochip analyzer including CCD imaging system has a complete optical system. It is one of reasons that the cost of biochip analyzer is expensive with CCD imaging system. In this paper, We suggested the simple and effective optical system for biochip analyzer with CCD imaging system. It consists of two parts with the same structure but opposite direction. Each part consists of achromatic doublet and meniscus. Suggested optical system has less lenses than existing system and more efficiently.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.505-506
• /
• 2013

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1344-1368
• /
• 2007

The Advanced countries including Japan, USA and European countries are adopting automatic system(e.g., auto-measurement using CCD camera) for measuring pantograph sliding plate and wheel abrasion to minimize manpower for E.M.U(Electric Multiple Unit) inspection and maintenance as part of management rationalization of railroad Corporation since late 1980's. In Korea, as part of scheme of business rationalization, automatic system for measuring pantograph sliding plate and wheel abrasion started to draw industry attention since late 1990s, and the system started to be installed in newly built depots of Korea Railroad Corporation since 2002. This study hopefully provides the base for realizing business rationalization and applying the advanced technology developed by Korea, the country of powerful IT basis, to overseas railroad organizations by examining automatic system for measuring pantograph sliding plate abrasion using existing CCD cameras produced domestically and in foreign countries to study cases(organizations in Korea) for improvement of measurement, management and inspection of pantograph sliding plate abrasion using CCD cameras with new cutting-edge technology; and by applying the study result to railroad organizations in metropolitan areas in Korea.

• Journal of the Korea Society for Simulation
• /
• v.23 no.3
• /
• pp.11-17
• /
• 2014

The central composite design (CCD) is often used to estimate the second-order linear model. This paper uses a correlation induction strategy of common random numbers (CRN) in simulation experiment and utilizes the induced correlations to obtain better estimates for the second-order linear model. This strategy assigns the CRN to all design points in the CCD. An appropriate selection of the axial points in CCD makes the weighted least squares (WLS) estimator be equivalent to ordinary least squares (OLS) estimator in estimating the linear model parameters of CCD. We analytically investigate the efficiency of this strategy in estimation of model parameters. Under certain conditions, this correlation induction strategy yields better results than independent random number strategy in estimating model parameters except intercept. The simulation experiment on a selected model supports such results. We expect a suggested random number assignment is useful in application of CCD in simulation experiments.

• Spatial Information Research
• /
• v.13 no.2 s.33
• /
• pp.129-138
• /
• 2005

In this paper, a 3D position tracking algorithm for a moving objects using a stereo CCD cameras was proposed. This paper purposed the method to extract the coordinates of the moving objects. That is improve the operating and data processing efficiency. We were applied the relative orientation far the stereo CCD cameras and image coordinates extraction in the left and right images after the moving object segmentation. Also, it is decided on 3D position far moving objects using an acquired image coordinates in the left and right images. We were used independent relative orientation to decide the relative location and attitude of the stereo CCD cameras and RGB pixel values to segment the moving objects. To calculate the coordinates of the moving objects by space intersection. And, We conducted the experiment the system and compared the accuracy of the results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8C
• /
• pp.1104-1112
• /
• 2004

In this paper, we establish measurement methods of vibration frequency for three-dimensional behavior measurement of large-scale structure using laser and high-speed CCD camera. We project the diode laser having a smaller fluctuation on the object plane attached to the structure and measure the displacement of the structure using a precise relative measurement algorithm. When we use high-speed(120 frames/sec) CCD camera, we can measure the vibration frequency having the uncertainty within 0.5% by taking FFT on the displacement, from 0Hz to 40Hz. And we also confirm the reliability and economical string of the suggested measurement method of vibration frequency of the structure by showing the accuracy of displacement measurement using laser is comparable to that of relative positioning methods using GPS.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.2
• /
• pp.97-102
• /
• 2002

In this paper, we propose the technique for recognizing the human s emotion by using the CCD color image. To do this, we first get the face image by using skin-color from the original color image acquired by the CCD camera. And we propose the method for finding man s feature points(eyebrows, eye, nose, mouse) from the face image and the geometrical method for recognizing human s emotion (surprise, anger, happiness, sadness) from the structural correlation of man s feature feints. The proposed method in this paper recognize the human s emotion by learning the neural network. Finally, we have proven the effectiveness of the Proposed method through the experimentation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.5
• /
• pp.1074-1079
• /
• 2004

So far, many sensors such as a structured grid pattern generator, a laser, and CCD camera to obtain 3D information have been used, but most of algorithms for a calibration are inefficient since a huge memory and experiment time are required. In this paper, the calibration algorithm of a structured grid pattern based on triangulation method is introduced to calculate 3D information in the real world. The beams generated from structured grid pattern generator established horizontally with the CCD camera are projected on the calibration plat. A CCD camera measures the intersection plane of a projected beam and an object plane. The 3D information is calculated using measured and calibration datum. This proposed method in this paper has advantages such as a memory saving and an efficient experimental time since the 3D information is obtained simply the triangulation method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.5
• /
• pp.459-465
• /
• 2000

In this paper, we propose a method for controlling camera focus in the short distance by analyzing NTSC signal of a CCD camera. When the distance between a camera and an object is less than about 1 meter, the existing CCD cameras with auto-focusing function are hard to acquire the proper images because they focus on the protruding minute parts ofthe object without taking into account the whole state of the object. To solve such a problem, we use an annealing algorithm to control the motor of a camera by analyzing the overall signal obtained from the camera. By doing so, we can acquire the adequate images at the near distance. The proposed method will be used for a personal identification system by human iris patterns.