• Food Science and Preservation
• /
• 제10권3호
• /
• pp.354-359
• /
• 2003

This study was conducted to investigate the fermentation characteristics of kimchi treated with different methods of water extracts of powdered green tea(GT). Four different kimchis, the SB-kimchi(control) which was not treatment of the extracts, SG-kimchi prepared with Chinese cabbage(CC) salted in 1％ GT containing 10％ brine, DG-kimchi prepared with CC dipped in 1％ GT for 30 min after salting, MS-kimchi prepared with the salted CC mixed with 1％ GT containing seasonings. All kimchis was fermented at 10$^{\circ}C$. The pH of treated-kimchis were maintained higher than those of control products during fermentation, but it showed no big difference between each treated groups. Total microbe of SB-kimchi(6.27-9.37 cfu/mL) was higher than those of GT-treated kimchi(5.17-9.20) during fermentation. The ratio of lactic acid bacteria against total microbe was higher than the treated kimchis. Total polyphenol content of kimchi was 52.75 mg％ in DG-kimchi, 47.71 mg％ in MS-kimchi, 44.89 mg％ in SG-kimchi, 30.70 mg％ in SB-kimchi on the 5th days of fermentation. Scores of crispy taste of SG- and DG-kimchi on the 5th days of fermentation was 4.03 and 4.01 points, respectively which was higher than control products. Scores of fishy and hot taste of GT-treated kimchi were lower than those of control products during all fermentation periods.

• Food Science and Preservation
• /
• 제10권3호
• /
• pp.345-359
• /
• 2003

This study was conducted to investigate the fermentation characteristics of kimchi treated with different methods of water extracts of powdered green tea(GT). Four different kimchis, the SB-kimchi(control) which was not treatment of the extracts, SG-kimchi prepared with Chinese cabbage(CC) salted in 1％ GT containing 10％ brine, DG-kimchi prepared with CC dipped in 1％ GT for 30 min after salting, MS-kimchi prepared with the salted CC mixed with 1％ GT containing seasonings. All kimchis was fermented at 10$^{\circ}C$. The pH of treated-kimchis were maintained higher than those of control products during fermentation, but it showed no big difference between each treated groups. Total microbe of SB-kimchi(6.27-9.37 cfu/mL) was higher than those of GT-treated kimchi(5.17-9.20) during fermentation. The ratio of lactic acid bacteria against total microbe was higher than the treated kimchis. Total polyphenol content of kimchi was 52.75 mg％ in DG-kimchi, 47.71 mg％ in MS-kimchi, 44.89 mg％ in SG-kimchi, 30.70 mg％ in SB-kimchi on the 5th days of fermentation. Scores of crispy taste of SG- and DG-kimchi on the 5th days of fermentation was 4.03 and 4.01 points, respectively which was higher than control products. Scores of fishy and hot taste of GT-treated kimchi were lower than those of control products during all fermentation periods.

• Journal of Naturopathy
• /
• 제9권1호
• /
• pp.13-21
• /
• 2020

Purpose: The purpose of this study examined the distribution of constitution(Con) types by examining the Chinese constitution table questionnaire with 594 Seoul citizens. It investigated the preferences of five colors by the Con. It then was to explore the validity of the test and the five colors according to the Con. Methods: We used the CC table questionnaire and surveyed by using a cardinal color. Results: The Con type distributions include yangweak(31.4%), yin-weak, gall-humidity, harmony, qi-weak, qi-gloom, specific, and extravasate in order. The lack of statistical significance also indicates that the CC test is not appropriate for Seoul citizens. The order of five preferences is 31% in blue, 25.3% in yellow, 18% in white, 17.7% in red, and 8% in black. Blue was the most preferred and black the least. There were differences in the distribution of five colors, but they were not statistically significant. In five viscera diseases of the yang-weak con, the stomach was more than half(50.3%). The highest preferred color was blue (30.9%). This difference was significant(p <.01). It evaluated that this influences the preference of five colors by five diseases. Conclusions: The constitution of Seoulian in the CC survey distributed into nine categories. There was a difference in preference of five colors by the con. However, it was not significant. This indicates that the Chinese con table is not suitable for Seoulian. However, the results are to be primary data for research in this field.

• Korean Journal of Agricultural Science
• /
• 제24권2호
• /
• pp.145-155
• /
• 1997

The large scaled field test by prefabricated vertical drains was performed to evaluate the superiority of vertical discharge capacity for drain materials through compare and analyze the time-settlement behavior with drain spacing and the compression index and consolidation coefficient obtained by laboratory experiments and field monitoring system. 1. The relation of measurement settlement($S_m$) versus design settlement($S_t$) and measurement consolidation ratio($U_m$) versus design consolidation ratio($U_t$) were shown $S_m=(1.0{\sim}1.1)S_t$, $U_m=(1.13{\sim}1.17)U_t$ at 1.0m drain spacing and $S_m=(0.7{\sim}0.8)S_t$, $U_m=(0.92{\sim}0.99)U_t$ at l.5m drain spacing, respectively. 2. The relation of field compressing index($C_{cfield}$) and virgin compression index($V_{cclab.}$) was shown $C_{cfield}=(1.0{\sim}1.2)V_{cclab.}$, But it was nearly same value when considered the error with determination method of virgin compression index and prediction method of total settlement. 3. Field consolidation coefficient was larger than laboratory consolidation coefficient, and the consolidation coefficient ratio($C_h/C_v$) were $C_h=(2.4{\sim}3.0)C_v$. $C_h=(3.5{\sim}4.3)C_v$ at 1.0m and 1.5m drain spacing and increased with increasing of drain spacing. 4. The evaluation of vertical discharge capacity with drain spacing from the results of the consolidation coefficient ratio showed largely superior in case the Mebra drain and Amer drain than other drain materials at 1.0m and 1.5m drain spacing, while the values showed nearly same value in case same drain spacing.

• Korean Journal of Remote Sensing
• /
• 제37권3호
• /
• pp.379-394
• /
• 2021

Air pollution data in South Korea is provided on a real-time basis by Air Korea stations since 2005. Previous studies have shown the feasibility of gridding air pollution data, but they were confined to a few cities. This paper examines the creation of nationwide gridded maps for PM10 concentration using 333 Air Korea stations with variogram optimization and ordinary kriging. The accuracy of the spatial interpolation was evaluated by various sampling schemes to avoid a too dense or too sparse distribution of the validation points. Using the 114,745 matchups, a four-round blind test was conducted by extracting random validation points for every 365 days in 2019. The overall accuracy was stably high with the MAE of 5.697 ㎍/m³ and the CC of 0.947. Approximately 1,500 cases for high PM10 concentration also showed a result with the MAE of about 12 ㎍/m³ and the CC over 0.87, which means that the proposed method was effective and applicable to various situations. The gridded maps for daily PM10 concentration at the resolution of 0.05° also showed a reasonable spatial distribution, which can be used as an input variable for a gridded prediction of tomorrow's PM10 concentration.

• Journal of the Korean Society for Marine Environment & Energy
• /
• 제15권3호
• /
• pp.263-272
• /
• 2012

Carbon dioxide, emitted by human activities since the industrial revolution, is regarded as a major contributor of global warming. There are many efforts to mitigate climate change, and carbon dioxide capture and geological storage (CCS) is recognized as one of key technologies because it can reduce carbon dioxide emissions from large point sources such as a power station or other industrial installation. The inclusion of CCS as clean development mechanism (CDM) project activities has been considered at UNFCCC as financial incentive mechanisms for those developing countries that may wish to deploy the CCS. Although the Conference of the Parties serving as the Meeting of the Parties to the UNFCCC's Kyoto Protocol (CMP), at Cancun in December 2010, decided that CCS is eligible as CDM project activities, the issues identified in decision 2/CMP.5 should be addressed and resolved in a satisfactory manner. Major issues regarding modalities and procedure are 1) Site selection, 2) Monitoring, 3) Modeling, 4) Boundaries, 5) Seepage Measuring and Accounting, 6) Trans-Boundary Effects, 7) Accounting of Associated Project Emissions (Leakage), 8) Risk and Safety Assessment, and 9) Liability Under the CDM Scheme. The CMP, by its decision 7/CMP.6, invited Parties to submit their views to the secretariat of Subsidiary Body for Scientific and Technological Advice (SBSTA), SBSTA prepared a draft modalities and procedure by exchanging views of Parties through workshop held in Abu Dhabi, UAE (September 2011). The 7th CMP (Durban, December 2011) finally adopted the modalities and procedures for CCS as CDM project activities (CMP[2011], Decision-/CMP.7). The inclusion of CCS as CDM project activities means that CCS is officially accredited as one of $CO_2$ reducing technologies in global carbon market. Consequently, it will affect relevant technologies and industry as well as law and policy in Korea and aboard countries. This paper presents a progress made on discussion and challenges regarding the issue, and aims to suggest some considerations to policy makers in Korea in order to demonstrate and deploy the CCS project in the near future. According to the adopted modalities and procedures for CCS as CDM project activities, it is possible to implement relevant CCS projects in Non-Annex I countries, including Korea, as long as legal and regulatory frameworks are established. Though Korea enacted 'Framework Act on Low Carbon, Green Growth', the details are too inadequate to content the requirements of modalities and procedures for CCS as CDM project. Therefore, it is required not only to amend the existing laws related with capture, transport, and storage of $CO_2$ for paving the way of an prompt deployment of CCS CDM activities in Korea as a short-term approach, but also to establish the united framework as a long-term approach.

• Food Science of Animal Resources
• /
• 제29권1호
• /
• pp.108-113
• /
• 2009

Apolipoprotein E (APOE) is a plasma lipoprotein in mammals and plays an important role in the transport and metabolism of lipids such as phospholipids and triglycerides. Therefore, the APOE gene could be a candidate gene controlling lipid metabolism in beef cattle. This study was performed to identify single nucleotide polymorphisms (SNP) in the APOE gene and to investigate the effects of SNP genotype on the carcass traits such as meat quantity and quality in Korean cattle. For PCR amplification, pooled DNA made from unrelated 60 individuals was prepared and primer pairs were designed based on the cDNA sequence of exon 4 region of the bovine APOE gene. A SNP was identified at position 2034 (T/C substitution) of the exon 4 region in the APOE gene. PCR-RFLP procedure with restriction enzyme ACC I was developed for determining the SNP genotype for each of a total of 309 animals with pedigree information and performance records through the national progeny testing program. The frequencies of the genotypes TT, TC and CC were 10.9, 46.9 and 42.2%. Gene frequencies were 0.344 for T allele and 0.656 for C allele. The g.2034T>C SNP genotype showed a significant effect (p<0.05) on dressing percentage and meat color, respectively. Animals with the TT genotype showed higher dressing percentage than those with the CC genotype, and TT genotype had desirable meat color compared with CC genotype. These results suggest that the g.2034T>C SNP genotype of the APOE gene may be useful as a DNA marker for meat quantity index and dressing percentage in Korean cattle.

• Journal of Satellite, Information and Communications
• /
• 제11권3호
• /
• pp.24-27
• /
• 2016

In this study, a 1kW Solid Oxide Fuel Cell(SOFC) test system was developed. A SOFC is the most promising power system to provide the higher efficient(over 50%) for house application area(1~10kW). To develop the optimized test system, the temperature control module that controls the preprocess and reaction condition, the flow control module that controls of the mass of reactants, and the electric loader that tests the discharge performance condition, etc. The temperature control module was designed to provide the high control resolution(under $1^{\circ}C$ at $750^{\circ}C$ of operating temperature) using K-type thermal couple. The flow control module was designed control blower and heater precisely using the phase control method. And the electric loader is designed that provide CV, CC, CR discharge mode and minimized the operating error adopting the independent DC-DC converter on analog input and output module. The performance of the developed SOFC test system showed that the accuracy of stack voltage was 0.15% at 80V and stack current was 0.1% at 100A.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.210-211
• /
• 2017

According to KS F 2560, water-reducing agents used when mixing concrete are to undergo quality evaluation testing slump, air contents, setting time, etc., when delivered from the admixture factory to the ready mixed concrete site. Yet in actual acceptance testing this could be substituted by the score report of the admixture company, in which a possibility of low reliability lies. Therefore this study sought to analyze whether by artificially changing the solid content rate of lignin- and naphthalene-based water-reducing agents and using a liquid densimeter evaluate the quality of the admixture. The results showed that the Type B liquid densimeter was most appropriate and 50cc the most appropriate capacity for the mass cylinder. Also, judging from the changes in density and pH according to the changes in solid content rate, it concludes that a rapid appraisal of the quality of lignin- and naphthalene-based water-reducing agents would be possible using a Type B liquid densimeter.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• 제29권4호
• /
• pp.821-834
• /
• 2019

As cyber security threats increase, there is a growing demand for highly reliable systems. Common Criteria, an international standard for evaluating information security products, requires formal specification and verification of the system to ensure a high level of security, and more and more cases are being observed. In this paper, we propose highly reliable drone systems that ensure high level security level and trust. Based on the results, we use formal methods especially Z/EVES to improve the system model in terms of scheduling in the system kernel.