• The Korean Journal of Pesticide Science
• /
• v.13 no.3
• /
• pp.190-196
• /
• 2009

The residues of abamectin 1.8% EC, resisted for control of pine wood nematode, Bursaphelenchus xylophilus in pine tree were surveyed in tissue of Pinus thunbergii and P. koraiensis after injection of a liquid formulation. Limits of detection of abamectin in tissue of P. thunbergii were $0.05\;mg\;kg^{-1}$ and mean recoveries at $0.5\;mg\;kg^{-1}$ trunk injection were 90.9% and 93.1% respectively in stem and trunk of P. thunbergii. Abamectin 1.8% EC, trunk injected in 15 m height P. thunbergii were detected in all stem (edible part of carrier insect of pine wood nematode, Monochamus alternatus) from 0.29 to $0.73\;mg\;kg^{-1}$ after 150 days injection. Amount of residue of abamectin 1.8% EC in 12.6 cm mean breast height diameter (DBH) P. thunbergii were variable depending on individual trees in natural forest. Amount of residues in lower and middle part of trunk were reduced with the passage of the injection time. In upper part of trunk were detected $1.84\;mg\;kg^{-1}$ on 30 days after injection however $0.65\;mg\;kg^{-1}$ on 15 days after injection and under detection limit on 100 and 180 days after injection in P. thunbergii. Bottom and middle parts of crown were detected $0.183\;mg\;kg^{-1}$ and $0.173\;mg\;kg^{-1}$ respectively on 180 days after injection in P. thunbergii. Mean residues of abamectin in crown and trunk were $0.80\;mg\;kg^{-1}$ and $0.30\;mg\;kg^{-1}$ on 170 days after trunk injection in 20 cm DBH and 9 m height P. koraiensis. Mean residues of abamectin in crown and trunk were $0.67\;mg\;kg^{-1}$ and $0.36\;mg\;kg^{-1}$ on 170 days after trunk injection in 15 cm DBH and 6 m height P. koraiensis.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.541-549
• /
• 2020

The Drug Delivery System (DDS) is defined as a technology for designing existing or new drug formulations and optimizing drug treatment. DDS is designed to efficiently deliver drugs for the care of diseases, minimize the side effects of drug, and maximize drug efficacy. In this study, the optimization of tripolyphosphate (TPP) concentration on the size of Chitosan nanoparticles (CNPs) produced by crosslinking with chitosan was measured. In addition, the characteristics of Fe₃O₄-CNPs according to the amount of iron oxide (Fe₃O₄) were measured, and it was confirmed that the higher the amount of Fe₃O₄, the better the characteristics as a magnetic drug carrier were displayed. Through the ninhydrin reaction, a calibration curve was obtained according to the concentration of γ-aminobutyric acid (GABA) of Y = 0.00373exp(179.729X)-0.0114 (R² = 0.989) in the low concentration (0.004 to 0.02 wt%) and Y = 21.680X-0.290 (R² = 0.999) in the high concentration (0.02 to 0.1 wt%). Absorption was constant at about 62.5% above 0.04 g of initial GABA. In addition, the amount of GABA released from GABA-Fe₃O₄-CNPs over time was measured to confirm that drug release was terminated after about 24 hr. Finally, GABA-Fe₃O₄-CNPs performed under the optimal conditions were spherical particles of about 150 nm, and it was confirmed that the properties of the particles appear well, indicating that GABA-Fe₃O₄-CNPs were suitable as drug carriers.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.4
• /
• pp.138-147
• /
• 2001

The stochiometric mixtures mixture of evaporating materials for the $ZnIn_{2}S_{4}$ single crystal thin film was prepared from horizontal furnace. To obtain the $ZnIn_{2}S_{4}$ single crystal thin film, $ZnIn_{2}S_{4}$ mixed crystal was deposited on throughly etched semi-insulting GaAs(100) in the Hot Wall Epitaxy(HWE) system. The sourceand substrate temperature were $610^{\circ}C$ and $450^{\circ}C$, respectively and the growth rate of the $ZnIn_{2}S_{4}$ single crystal thin film was about 0.5$\mu\textrm{m}$/hr. The crystalline structure of $ZnIn_{2}S_{4}$ single crystal thin film was investigated by photoluminescence and double crystal X-ray diffraction (DCXD) measurement. The carrier density and mobility of $ZnIn_{2}S_{4}$ single crystal thin film measured from Hal effect by van der Pauw method are $8.51{\times}10^{17}{\textrm}{cm}^{-3}$, 291$\textrm{cm}^2$/V.s at $293^{\circ}$K, respectively. From the photocurrent spectrum by illumination of perpendicular light on the c-axis of the $ZnIn_{2}S_{4}$ single crystal thin film, we have found that the values of spin orbit splitting $\Delta$So and the crystal filed splitting DCr were 0.0148eV and 0.1678 eV at $10^{\circ}$K, respectively. From the photoluminescence measurement of $ZnIn_{2}S_{4}$ single crystal thin film, we observed free excition($E_{X}$) typically observed only in high quality crystal and neutral donor bound exicton ($D^{\circ}$, X) having very strong peak intensity. The full width at half maximum and binding energy of neutral donor bound excition were 9meV and 26meV, respectively. The activation energy of impurity measured by Haynes rule was 130meV.

• Journal of the Korean Geographical Society
• /
• v.28 no.3
• /
• pp.247-267
• /
• 1993

According to developing international economy since the World War II, the increase and competition of the national business is so empha-sized tht both the interest and the necessity about marine transportation playing the impor-thant role of international transportation are increased. Today, the container transportation, as called the innovation of marine transport has been prevailed since the 1970's. The purpose of this paper is to grasp the spatial structure of the hinterlands and forelands, its object is export container cargo at Pusan Export Port, as known for the transportation node of modern containerlization. In this study, for the purpose of grasping the relation between hinterlands and forelands of Korean export container cargo, first, I researched the transition of carloading about container cargo, the bistribution channel of cargo, the change of the items of container and the carlo-adings about transport route, secondly, I used the cluster analysis so as to group hinterlands according to the items of goods and forelands. The object of the analysis is container cargo of Choyang Line, Hanjin Shipping and Hyundai Merchant Marine of National Frag Carriers. The source materials used in this study are Trucking Data of Hanjin Co., Container Ren-tal Data of Samik Transport Co. and Transpor-ting Present Condition Tables of Hyundai Mer-chant Marine. 1. There are two kinds of the transport classi-fied by its form: FCL and LCL. In Pusan Con-tainer Export, a lot of textile goods, clothings and furniture, compound, electric goods, and so on are dealed with but the rate of occupation of the transport is getting lower while that of occupation of equipment, papers and agricultu-ral, mineral and livestock industry higher. 2. In 1990, the transports of container cargo in Korea consist of 7 services and round-the world lines. We can list North America lines, East-South Asian lines, Japan lines and Inter European lines, in order of the quantity of tran-sport form the largest to the smaller. We can have another list that Japan lines, North Ame-rica lines and East-South lines in order of the rate participation of national flag carriers, be-cacuse Korean foreign trade lay disproportionate emphasis on East-South Asian lines. Japan lines among them is the biggest import-export market. Since the rationlization policy of marine tran-sport in 1984, each of national flag carriers have its own lines. Hanjin Shipping predominates over North America lines, Choyang Line over New Zealand, Inter European and Austria lines and Hyundai Merchant Marine over Center-South America lines, in terms of the volume of transport. And small-to-medium sized shippers are prevailing in lines which are adjacent to Korea, Such as Japan lines and East-South Asian lines. 3. In relation to hinterlands and forelands of Choyang Line, the light industry goods, electric goods and machinary produced in Seoul and Pusan are exported to the major ports in Europe and Japan, the same produces in Suwon, Ulsan, Kumi are exported to European Ports, and those in Incheon and Kwangju Austrian and Japanese ports, and those in the rest regions to the major port in Japan. 4. In relation to hinterlands and forelands of Hanjin Shipping, the light industry goods pro-ducing in Seoul and Pusan, the electric goods and machinary in Incheon and Pyeongteck, are exported to New York and Los Angeles. Electric goods and machinary Masan, Anyang, Cheona, Cheongju and Incheon, Electric goods machinary and light industry goods in Kwangju and non mental goods in Pohang, are exported New York, Los Angeles and Oakland. 5. In relation to hinterlands and forelands of Hyundai Merchant Marine, the region of Seoul, Pusan and Incheon closely related with the main ports in U.S.A. The rest regions with Montreal. The hinterlands of export container cargo can be classified by its export items into three kinds: the large city, industrial city and the rest city. Choyang Line's forelands are European lines, Japan lines and Austria lines, and Hanjin Shipping's forelands are North America lines, and Hyundai Merchant Marine's forelands are North America lines and Japan line. 3 National flag carriers' major forelands are determined by the size of port and the shipper's convenient use of the port terminal.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.2
• /
• pp.73-98
• /
• 2016

This is a case review of the Korean Supreme Court about international jurisdiction over a foreign-related case. This case is a guideline to other following cases how Korean court has international jurisdiction over the foreign elements cases. This case was an air crash accident in Busan, Korea. And the applicant was a chinese who was parents of flight attendant. The defendant was Air China. The applicant suid the defendant in Korea court, requesting for compensation for damages based on the contract of employment between died employee and the defendant and tort. The trial court rejected jurisdiction. But Supreme court granted jurisdiction on Korean court. The court determined the jurisdiction by the Korean Private International Law Act(KPILA). The KPILA has a concept of 'substantial connection', it is a main legal analysis to determine the jurisdiction. In the act, Article 2 Paragraph 1 says "In case a party or a case in dispute is substantively related to the Republic of Korea, a court shall have the international jurisdiction. In this case, the court shall obey reasonable principles, compatible to the ideology of the allocation of international jurisdiction, in judging the existence of the substantive relations." And Article 2 Paragraph 2 declares "A court shall judge whether or not it has the international jurisdiction in the light of jurisdictional provisions of domestic laws and shall take a full consideration of the unique nature of international jurisdiction in the light of the purport of the provision of paragraph (1)." In this case review find concepts, theories and cases out to clarify the meaning about Article 2 of the KPILA. Also it quoted from the concept of "the base rule" in Rome I (Regulation (EC) 593/2008 on the law applicable to contractual obligations) to apply the contract of employment between flight attendant and Air carrier.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.451-464
• /
• 2008

Three-phase inverse fluidized bed has been widely adopted with its increasing demand in the fields of bioreactor, fermentation process, wastewater treatment process, absorption and adsorption processes, where the fluidized or suspended particles are small or lower density comparing with that of continuous liquid phase, since the particles are frequently substrate, contacting medium or catalyst carrier. However, there has been little attention on the three-phase inverse fluidized beds even on the hydrodynamics. Needless to say, the information on the hydrodynamics and transport phenomena such as heat and mass transfer in the inverse fluidized beds has been essential for the operation, design and scale-up of various reactors and processes which are employing the three-phase inverse beds. In the present article, thus, the information on the three-phase inverse fluidized beds has been summarized and reorganized to suggest a pre-requisite knowledge for the field work in a sense of engineering point of view. The article is composed of three parts; hydrodynamics, heat and mass transfer characteristics of three-phase inverse fluidized beds. Effects of operating variables on the phase holdup, bubble properties and particle fluctuating frequency and dispersion were discussed in the section of hydrodynamics; effects of operating variables on the heat transfer coefficient and on the heat transfer model were discussed in the section of heat transfer characteristics ; and in the section of mass transfer characteristics, effects of operating variables on the liquid axial dispersion and volumetric liquid phase mass transfer coefficient were examined. In each section, correlations to predict the hydrodynamic characteristics such as minimum fluidization velocity, phase holdup, bubble properties and particle fluctuating frequency and dispersion and heat and mass transfer coefficients were suggested. And finally suggestions have been made for the future study for the application of three-phase inverse fluidized bed in several available fields to meet the increasing demands of this system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1520-1521
• /
• 2008

There are several ways to demonstrate white organic light emitting diodes (OLEDs) for displays and solid state lighting applications. Among these approaches are the stacked three primary or two complementary colors light-emitting layers, multiple-doped emissive layer, and excimer and exciplex emission [1-10]. We report on white phosphorescent excimer devices by using two light emitting materials based on platinum complexes. These devices showed a peak EQE of 15.7%, with an EQE of 14.5% (17 lm/W) at $500\;cd/m^2$, and a noticeable improvement in both the CIE coordinates (0.381, 0.401) and CRI (81). Devices with the structure ITO/PEDOT:PSS/TCTA (30 nm)/26 mCPy: 12% FPt (10 nm) /26 mCPy: 2% Pt-4 (15 nm)/BCP (40 nm)/CsF/Al [device 1], ITO/PEDOT:PSS/TCTA (30 nm)/26 mCPy: 2% Pt-4 (15 nm)/26 mCPy: 12% FPt (10 nm)/BCP (40 nm)/CsF/Al [device 2], and ITO/PEDOT:PSS/TCTA (30 nm)/26 mCPy: 2% Pt-4: 12% FPt (25 nm)/BCP (40 nm)/CsF/Al [device 3] were fabricated. In these cases, the emissive layer was either the double-layer of 26 mCPy:12% FPt and 15 nm 26 mCPy: 2% Pt-4, or the single layer of 26mCPy with simultaneous doping of Pt-4 and FPt. Device characterization indicates that the CIE coordinates/CRI of device 2 were (0.341, 0.394)/75, (0.295, 0.365)/70 at 5 V and 7 V, respectively. Significant change in EL spectra with the drive voltage was observed for device 2 indicating a shift in the carrier recombination zone, while relatively stable EL spectra was observed for device 1. This indicates a better charge trapping in Pt-4 doped layers [10]. On the other hand, device 3 having a single light-emitting layer (doped simultaneously) emitted a board spectrum combining emission from the Pt-4 monomer and FPt excimer. Moreover, excellent color stability independent of the drive voltage was observed in this case. The CIE coordinates/CRI at 4 V ($40\;cd/m^2$) and 7 V ($7100\;cd/m^2$) were (0.441, 0.421)/83 and (0.440, 0.427)/81, respectively. A balance in the EL spectra can be further obtained by lowering the doping ratio of FPt. In this regard, devices with FPt concentration of 8% (denoted as device 4) were fabricated and characterized. A shift in the CIE coordinates of device 4 from (0.441, 0.421) to (0.382, 0.401) was observed due to an increase in the emission intensity ratio of Pt-4 monomer to FPt excimer. It is worth noting that the CRI values remained above 80 for such device structure. Moreover, a noticeable stability in the EL spectra with respect to changing bias voltage was measured indicating a uniform region for exciton formation. A summary of device characteristics for all cases discussed above is shown in table 1. The forward light output in each case is approximately $500\;cd/m^2$. Other parameters listed are driving voltage (Bias), current density (J), external quantum efficiency (EQE), power efficiency (P.E.), luminous efficiency (cd/A), and CIE coordinates. To conclude, a highly efficient white phosphorescent excimer-based OLEDs made with two light-emitting platinum complexes and having a simple structure showed improved EL characteristics and color properties. The EQE of these devices at $500\;cd/m^2$ is 14.5% with a corresponding power efficiency of 17 lm/W, CIE coordinates of (0.382, 0.401), and CRI of 81.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.7
• /
• pp.37-43
• /
• 2008

In this paper, the dependence of electrical characteristics of Silicon-$Al_2O_3$-Nitride-Oxide-Silicon (SANOS) memory cell transistors and program/erase (P/E) speed, reliability of memory device on interface trap between Si substrate and tunneling oxide and bulk trap in nitride layer were investigated using charge pumping method which has advantage of simple and versatile technique. We analyzed different SANOS memory devices that were fabricated by the identical processing in a single lot except the deposition method of the charge trapping layer, nitride. In the case of P/E speed, it was shown that P/E speed is slower in the SANOS cell transistors with larger capture cross section and interface trap density by charge blocking effect, which is confirmed by simulation results. However, the data retention characteristics show much less dependence on interface trap. The data retention was deteriorated as increasing P/E cycling number but not coincides with interface trap increasing tendency. This result once again confirmed that interface trap independence on data retention. And the result on different program method shows that HCI program method more degraded by locally trapping. So, we know as a result of experiment that analysis the SANOS Flash memory characteristic using charge pumping method reflect the device performance related to interface and bulk trap.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.5
• /
• pp.618-628
• /
• 1999

Background: Cell growth is a balance between cell proliferation and cell death. Insulin-like growth factor-I(IGF-I), which binds IGF-I receptor(IGF-IR), mediates cellular proliferation as a potent mitogen. IGF binding protein-3(IGFBP-3) as a circulating major IGFBP can inhibit or enhance the effects of IGF-I on cellular growth by binding IGFs. Methods: We investigated the expressions of mRNA of IGF-I and IGF-IR by northern blot and phosphorylation of IGF-IR with the treatment of IGF-I by western blot in 3T3 fibroblast cells. The cellular proliferations of 3T3 cells with the treatments of IGF-I were evaluated using $^3H$-thymidine incorporation and MTT assay. Also to observe the effect of IGFBP-3 on cellular proliferation, 3T3 cells were treated with anti-IGFBP-3 and ${\alpha}IR_3$(monoclonal antibody to IGF-IR) alone or in combination. Results: Our results demonstrated that 3T3 cells showed mRNA expressions of IGF-I and IGF-IR and the IGF-I increased phosphorylation of IGF-IR. The treatments of 3T3 cells with IGF-I increased cellular proliferation in 5 % and 1 % seruma-containing media, not in serum-free media. The addition of anti-IGFBP-3 to neutralize IGFBP-3 showed 2-fold increase of cellular proliferation, and also co-incubation of anti-IGFBP-3 and ${\alpha}IR_3$ together showed similar increase of cellular proliferation in 3T3 cells. Interestingly, when the cells were pretreated with ${\alpha}IR_3$ for 4 hr, prior to the simultaneous addition of ${\alpha}IR_3$ and anti-IGFBP-3, anti-IGFBP-3-mediated cellular proliferation was decreased to control level. All of these results suggest that free IGF-I released from IGF-I/IGFBP-3 complex would be involved in the cellular proliferation. Conclusion: IGF-I is a mitogen through the activation of IGF-IR in 3T3 cells, and IGFBP-3 could be a potent inhibitor for IGF-I action by binding IGF-I.