• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.2
• /
• pp.137-145
• /
• 1986

The contention resolution algorithm with the limited packet delay time as well stable distribution as the packet delay time is proposed and implementes for improving the mean packet delay time in the network employing CSMA/CD as the access method. The implementation of node controller is based on IEEE 802.2 standard logical link control(LLC) and IEEE 802.3 standard medium access control(MAC). Some portion of IEEE 802.3 Standard MAC, and the Binary Exponential Back-off(BEB) algorithm is replaced by the proposed algorithm. From the view of normalized mean packet transmission delay time, the controller implemented here can be applicable to the office-automation system, and the factory-and laboratory-automation environment where the limited time criterion is very significant.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1469-1472
• /
• 2019

CAN bus in automotive applications does not assign node addresses. When a node is hacked and it transmits malicious data frame, it is difficult to resolve which node is hacked. However, this CAN bus internal attack seriously threatens the safety of a car, so a prompt counterattack is necessary in the CAN bus physical layer. This paper proposes a counterattack method against malicious CAN bus internal attack. When a malicious data frame is detected, an intrusion detection system in the CAN bus increases the error counter of the malicious node. Then, the malicious node is off from the bus when its error counter exceeds its limit. A CAN controller with the proposed method is implemented in Verilog HDL, and the proposed method is proved to counterattack against malicious CAN bus internal attack.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.348-353
• /
• 2003

This paper considers the optimal control problem in real-time control systems with random time-delays. It proposes an algorithm which uses the linear quadratic (LQ) control method and a dedicated technique to compensate for the time-delay effects. Since it is assumed that the time-delays are unknown but the probability distribution of the delays are known a priori, the algorithm considers the mean value of the time-delays as a nominal value for random delay compensation. An example is given to show the performance of the proposed algorithm, where an inverted pendulum system is controlled over a controller-area network (CAN). Simulation results show that the proposed algorithm provides good performance results. It is shown that our algorithm is comparable to existing algorithms in both computation cost and performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.762-765
• /
• 2011

전기자동차 인프라 구축을 위해서는 급속충전관련 기술 확보 및 시설확충에 관한 투자와 연구가 지속적으로 이루어지고 있는 실정이다. 특히 다양한 급속충전 기술 중에서 공동 인프라용으로 적합한 방식에는 어떤 종류가 있는지 살펴보고, 급속충전시스템을 이용하는 전기자동차의 충전 상태, 기타 동작 상태를 실시간으로 확인하기 위해 BMS의 CAN 통신을 기반으로 하는 전기자동차 급속충전 모니터링 시스템을 설계하는 방법을 제안한다.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.270-273
• /
• 2002

복수구동장치를 사용하여 작업을 수행하는 시스템은 동기화를 위해 기계적인 제한조건을 두고 운용하는 경우 지속적인 유지보수가 요구되고 작업 정밀도가 떨어진다 이러한 단점을 보완하기 위해 개별적인 구동장치의 제어루프 외부에 동기화를 위한 제어루프를 추가하는 방법이 제안되었다. 본 논문에서는 CAN(Controller Area Network)으로 연결된 두 대의 서보앰프를 구동하여 주어진 작업을 수행하는 경우 외란과 내부 파라미터 변동에 강인한 $H^{\infty}$ 제어기를 설계하고 이를 이용하여 동기제어 알고리즘을 구현하고자한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.398-398
• /
• 2000

Since there is a blind zone in driver's view around the excavator, industrial accidents between the equipment and the workers within the zone have been occurred frequently. The purpose of this paper is to develop a obstacle recognition system which can prevent such an accident by providing the driver with the information on direction and distance of the obstacle within the blind zone. We designed the ultrasonic sensor based obstacle recognition system which consists of sensor arrays and a control unit connected via CAN(controller area network). The Cross-correlation technique and histogramic probability distribution method are used as a reliable obstacle detection algorithms to remove the environmental noise. The experimental results using a real excavator show the effectiveness of the system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.776-778
• /
• 2011

급속충전 기술은 현재 battery의 성능 및 안전성 등 다양한 요인에 따라 동작성능이 좌우되므로 모니터링 시스템에 의한 충전상태 파악은 충전 알고리즘의 개선, 전기자동차 BMS와 연동, 사용자와의 충전 프로세스 제어 등 다양한 작업환경과 연계되어 있다. 급속충전시스템의 동작 상태를 CAN 프로토콜을 이용하여 실시간으로 감시가 가능한 시스템을 설계 제작하여 전기자동차의 battery를 최단시간에 최적화된 상태로 충전 가능하도록 설계하여 급속충전기 실시간 모니터링 시스템을 설계하는 방법을 제안한다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.3
• /
• pp.30-39
• /
• 2012

In this paper, a safe driving assistance system is proposed by detecting the status of driver's doze based on face and eye detection. By the level of the fatigue, safe driving system alarms or set the seatbelt on vibration. To reduce the effect of backward light and too strong solar light which cause a decrease of face and eye detection rate and false fatigue detection, post processing techniques like image equalization are used. Haar transform and PCA are used for face detection. By using the statistic of the face and eye structural ratio of normal Koreans, we can reduce the eye candidate area in the face, which results in reduction of the computational load. We also propose a new eye status detection algorithm based on Hough transform and eye width-height ratio, which are used to detect eye's blinking status which decides doze level by measuring the blinking period. The system alarms and operates seatbelt on vibration through controller area network(CAN) when the driver's doze level is detected. In this paper, four algorithms are implemented and proposed algorithm is made based on the probability model and we achieves 84.88% of correct detection rate through indoor and in-car environment experiments. And also we achieves 69.81% of detection rate which is better result than that of other algorithms using IR camera.

• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.251-256
• /
• 2005

Today's port system,; require larger and faster operation of transfer cranes in order to accommodate rapidly increasing traffic. These cranes need precise control of their components for operational efficiency. This paper presents an IEEE 1451 based smart module that allows numerous sensors and actuators of the crane to attach themselves to various networks more easily. The smart module has been experimentally evaluated on a CAN network for its performance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.6
• /
• pp.533-541
• /
• 2017

Recently, with the adoption of modern computing and communication technologies, manufacturing systems have become more autonomous and intelligent. Thus, as the number of field devices with smart sensors also increase, the need for an integrated management of such devices becomes essential. This paper proposes a smart encoder architecture that integrates the position sensing function with CANopen connectivity. In addition, an integrated system is proposed to simultaneously control and monitor multiple encoders over the Controller Area Network (CAN) fieldbus network. We evaluated the performance and functionalities of the proposed system by comparative experiments with commercial CANopen smart encoders using a CANopen conformance test.