• The Korean Journal of Physiology and Pharmacology
• /
• v.27 no.1
• /
• pp.49-59
• /
• 2023

Metabolic syndrome (MetS) involves multi-factorial conditions linked to an elevated risk of type 2 diabetes mellitus and cardiovascular disease. Pre-metabolic syndrome (pre-MetS) possesses two MetS components but does not meet the MetS diagnostic criteria. Although cardiac autonomic derangements are evident in MetS, there is little information on their status in pre-MetS subjects. In this study, we sought to examine cardiac autonomic functions in pre-MetS and to determine which MetS component is more responsible for impaired cardiac autonomic functions. A total of 182 subjects were recruited and divided into healthy controls (n=89) and pre-MetS subjects (n=93) based on inclusion and exclusion criteria. We performed biochemical profiles on fasting blood samples to detect pre-MetS. Using standardized protocols, we evaluated anthropometric data, body composition, baroreflex sensitivity (BRS), heart rate variability (HRV), and autonomic function tests (AFTs). We further examined these parameters in pre-MetS subjects for each MetS component. Compared to healthy controls, we observed a significant cardiac autonomic dysfunction (CAD) through reduced BRS, lower overall HRV, and altered AFT parameters in pre-MetS subjects, accompanied by markedly varied anthropometric, clinical and biochemical parameters. Furthermore, all examined BRS, HRV, and AFT parameters exhibited an abnormal trend and significant correlation toward hyperglycemia. This study demonstrates CAD in pre-MetS subjects with reduced BRS, lower overall HRV, and altered AFT parameters. Hyperglycemia was considered an independent determinant of alterations in all the examined BRS, HRV, and AFT parameters. Thus, hyperglycemia may contribute to CAD in pre-MetS subjects before progressing to MetS.

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.65-77
• /
• 2024

This study aimed to propose effective ways to integrate CLO into educational settings by conducting a comparative analysis of pattern functions in YUKA and CLO, specifically focusing on skirt prototypes and variations. CLO, being a 3D virtual sample CAD tool, is mainly used in education to facilitate the creation of 3D virtual clothing. In order to explore the applicability of CLO's pattern functions in pattern education, CAD education experts were asked to produce two types of skirt prototypes and two skirt variations. Subsequently, in-depth interviews were conducted. In addition, the skirt pattern creation process was recorded on video and used for comparative analysis of YUKA and CLO pattern functions. The comparison revealed that CLO provides the pattern tools necessary for drafting skirt prototypes. The learning curve for acquiring the skills necessary for drafting and transforming skirt prototypes was found to be relatively shorter for CLO compared to YUKA. In addition, due to CLO's surface-based pattern drawing method, it is difficult to move or copy only specific parts of the outline, and there are some limitations in drawing right angle lines. In the pattern transformation process, CLO's preview function proved to be advantageous, and it was highly rated on user convenience due to the intuitive UI. Thus, CLO shows promise for pattern drafting education and is deemed to have high scalability as it is directly linked to 3D virtual clothing.

• Journal of the Korean Society of Radiology
• /
• v.8 no.1
• /
• pp.27-33
• /
• 2014

Medical imaging has increased rapidly in the increase of interest in health, with the development of computer technology, digitization of medical imaging is rapidly advancing, PACS has been introduced to the medical field. Increase in the production of medical images by these phenomena made increased the workload of radiologist who must read a medical image. in response to the need for secondary diagnosis using a computer, The term of CAD in medical radiology field was introduced. In this study, we have proposed a CAD algorithm for the interpretation of the image obtained by the digital X-ray mammography equipment. The experiments were performed by programmed in Visual C++ for the proposed algorithm. A result of the execution of the CAD algorithm seven sample images, the results of five samples was confirmed in breast cancer and benign tumors, both the images sample was error processing. If you use a program that implements this with the algorithm proposed in this study it is helpful to reading breast images, and it is considered to contribute significantly to the early detection of breast cancer.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.1
• /
• pp.12-21
• /
• 2022

PURPOSE. The purpose of this study was to investigate changes in retention and wear pattern of Locator^® and ADD-TOC attachments on a digital milled bar by performing chewing simulation and repeated insertion/removal of prostheses in fully edentulous models. MATERIALS AND METHODS. Locator (Locator^®; Zest Anchors Inc., Escondido, CA, USA) was selected as the control group and ADD-TOC (ADD-TOC; PNUAdd Co., Ltd., Busan, Republic of Korea) as the experimental group. A CAD-CAM milled bar was mounted on a master model and 3 threaded holes for connecting a bar attachment was formed using a tap. Locator and ADD-TOC attachments were then attached to the milled bar. Simulated mastication and repeated insertion/removal were performed over 400,000 cyclic loadings and 1,080 insertions/removals, respectively. Wear patterns on deformed attachment were investigated by field emission scanning electron microscopy. RESULTS. For the ADD-TOC attachments, chewing simulation and repeated insertion/removal resulted in a mean initial retentive force of 24.43 ± 4.89 N, which were significantly lower than that of the Locator attachment, 34.33 ± 8.25 N (P < .05). Amounts of retention loss relative to baseline for the Locator and ADD-TOC attachments were 21.74 ± 7.07 and 8.98 ± 5.76 N (P < .05). CONCLUSION. CAD-CAM milled bar with the ADD-TOC attachment had a lower initial retentive force than the Locator attachment. However, the ADD-TOC attachment might be suitable for long-term use as it showed less deformation and had a higher retentive force after simulated mastication and insertion/removal repetitions.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.9
• /
• pp.192-203
• /
• 2001

The design of gate and runner(delivery system) is one of the most important subject in injection molding. Delivery system is a channel to flow the polymer melt from the injection molding machine to the mold cavities. Also, delivery system affect quality and productivity of the part. The synthesis of delivery system of injection molding has been done empirically, since it requires profound knowledge about the moldability and causal effects on the properties of the part, which are not available to designers through the current CAD systems. GATEWAY is a knowledge module which contains knowledge to permit non-experts as well as mold design experts to generate the acceptable geometries of gate and runner far injection molded parts. A knowledge-based CAD system is constructed by adding the knowledge module, GATEWAY, to an existing geometric modeler. A knowledge-based CAD system is a new tool which enables the concurrent design and CIM with integrated and balanced design decisions at the initial design of injection molding.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.2 no.1
• /
• pp.88-93
• /
• 1998

It is frequently important to approximate a rational B$\acute{e}$zier curve by an integral, i.e., polynomial one. This need will arise when a rational B$\acute{e}$zier curve is produced in one CAD system and is to be imported into another system, which can only handle polynomial curves. The objective of this paper is to present an algorithm to approximate rational B$\acute{e}$zier curves with polynomial curves of higher degree.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.6
• /
• pp.909-916
• /
• 2013

Objectives : The purpose of this study was to investigate the perceptions of dental hygienists toward digital dentistry. Methods : The subjects were 393 dental hygienists in Daegu Gyeongbuk. A total of 380 data were analyzed except the incomplete questionnaires. Data were analyzed by descriptive statistics, chi-square test, t-test, one-way ANOVA using SPSS version 18.0. Results : 1. Difference of perception by general characteristics was affected by age, academic background, working career, and married. 2. Difference of perception by utilization of digital facilities was affected by digital camera, CAD/CAM system, oral scanner, and computer system. 3. Difference of perception by digital education experience and intention of participation was affected by stronger intention to participate in digital education and practical exercise. Digital X-ray system and CAD/CAM system were the must-be equipment in education. Conclusions : Utilization of digital dentistry is the motive for education experience in dental hygienists.

• Journal of Practical Engineering Education
• /
• v.15 no.3
• /
• pp.635-640
• /
• 2023

Creating New Value Through Digital Transformation Across Industries Worldwide: A Focus on Transitioning from CAD to BIM Design in the Construction Sector with the Implementation of Mandatory BIM Design by 2025 by the Ministry of Land, Infrastructure, and Transport in South Korea. Challenges and Proposed Methodology for Enhancing Efficiency in BIM Design in the Civil Engineering Field of Underground Infrastructure, and Nurturing BIM Design Experts.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.3
• /
• pp.201-214
• /
• 2024

In patients with unstable mandibular movements who are accompanied by involuntary facial muscle movements and asymmetrical changes in the facial features, many difficulties exist in determining the vertical dimension of occlusion, recording centric relation, and transferring information about the occlusal plane. In this case, for a patient with unilateral facial nerve palsy who was edentulous for a long period of time, a CAD-CAM provisional prosthesis was fabricated using a 3D printing customized gothic arch tracer and a prefabricated occlusal plane recorder, the POP bow system, to achieve a stable interarch relationship. Afterwards, a full mouth implant fixed prosthesis was fabricated by delivering an appropriate vertical dimension of occlusion, a reproducible centric relation, and a correct three-dimensional occlusal plane, and continuous maintenance was performed to restore functional and aesthetic oral health to the patient.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.1
• /
• pp.28-35
• /
• 2013

Product Life cycle Management (PLM) is an indispensable tool for manufactures to develop competitive products in an efficient way. This enlarges the number of participants for product development who should understand PLM for their supporting activities. However, burdens for developing example products, maintaining complex PLM systems and training prerequisite skills for engineering tools such as CAD systems prohibit an efficient introductory course to PLM. This paper proposes a comprehensive introductory course to PLM that bases on general product development process. In addition, it enables participants to build their example products with familiar Lego blocks and to construct 3D CAD assembly models by using predefined 3D elements. The PLM system for the course provides an intuitive and simple user environment for participants to specify their parts lists, associated 3D CAD models, and product structure of example products. Experiences on a class of the course show it is a valid and efficient education and training method for the PLM introduction.