• The Korean Journal of Physiology and Pharmacology
• /
• v.6 no.3
• /
• pp.139-142
• /
• 2002

To examine intracellular signaling of human $S1P_3\;(hS1P_3),$ a sphingosine 1-phosphate (S1P) receptor in plasma membrane, $hS1P_3$ DNA was transfected into RH7777 rat hepatoma cell line, and the inhibition of forskolin-induced cAMP accumulation and activation of MAP kinases by S1P were tested. In $hS1P_3$ transformants, S1P inhibited forskolin-induced activation of adenylyl cyclase activity by about 80% and activated MAP kinases in dose-dependent and pertussis-toxin (PTX) sensitive manners. In oocytes expressing $hS1P_3$ receptor, S1P evoked $Cl^-$ conductance. These data suggested that PTX-sensitive G proteins are involved in $hS1P_3-mediated$ signaling, especially the positive action of S1P in cell proliferation. The potential advantages of rat hepatoma cells for the research of sphingosine 1-phosphate receptor are discussed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.117-124
• /
• 1996

The .mu.c-Si:H films have been deposited by PeCVD at the various conditions such as hydrogen dilution ratio, substrate temperature and RF power density. Then, we studied their electrical and optical properties. Top gate hydrogenated micro-crystalline silicon thin film transistors($\mu$c-Si:H TFTs) using $\mu$-Si:H and a-SiN:H films have been fabricated by FECVD. The electrical characteristics of the devices have been investigated by semiconductor parameter analyzer and compared with amorphous silicon thin film transistors (a-Si:H TFTs). In this study, on/off current ratio, threshold voltage and the field effect mobility of the $\mu$c-Si:H TFT were $3{\times}10^{4}$, 5.06V and 0.94cm$^{2}$Vs, respectively.

• Journal of the Korean Chemical Society
• /
• v.40 no.8
• /
• pp.579-584
• /
• 1996

The HOMO-LUMO gap, and static and dynamic third-order polarizabilities for the polyenes are evaluated by means of the time-dependent Hartree Fock(TDHF) semiempirical PM3, AM1, MNDO, and MINDO/3 calculations. All calculations have performed on the series $C_2H_4$ to $C_{32}H_{34}$. The HOMO-LUMO gap increases in the order: MINDO/3> MNDO> PM3> AM1 levels. THG, DC-EFISHG, IDRI, and OKE for the various calculations show the order: AM1 > MNDO > PM3 levels. The various third-order effects for the polyenes have the following order: THG> DC-EFISHG> IDRI> OKE.

• KSBB Journal
• /
• v.11 no.4
• /
• pp.470-475
• /
• 1996

A white rot fungus as a microbial source producing bioflocculant was isolated from rotted leaves and identified as Pestalotiopsis sp. M01. The flocculating activity and productivity of Pestan produced by Pestalotiopsis sp. KCTC 8637P was determined by using Czapek-Dox medium as the inorganic salt source. The flocculating activity was highest at 3% sucrose and 0.3% $KN0_3$, pH 7, and $25^{\circ}C$, respectively. Whilst, the strain growth was highest at 3% sucrose, 0.3% TEX><$KN0_3$, pH 5, and $25^{\circ}C$, respectively.

• Journal of the Korean Ceramic Society
• /
• v.28 no.3
• /
• pp.215-224
• /
• 1991

The synthesis of SrTiO3 powders having high purity and homogeneous submicron particle size was attempted by the oxalate method. The microstructure and dielectric properties of SrTiO3 based boundary layer capacitor (BLC) were investigated. Strontium titanyl oxalate[SrTiO(C2O4)2.4H2O] was prepared from the mixing solution of (Sr, Ti) using oxalic acid(H2C2O4) as a precipitating agent at 8$0^{\circ}C$. The crystalline SrTiO3 powder was obtained by thermal decomposition of the precipitate above $600^{\circ}C$. The crystalline SrTiO3 powder containing Nb2O5 as a dopant, TiO2 and SiO2 as additives was sintered at 1360~144$0^{\circ}C$ in the reducing atmosphere to get semiconductive SrTiO3. Insulating material containing PbO-Bi2O3-B2O3 frit was printed on the sintered semiconductive SrTiO3 and fired at 120$0^{\circ}C$ for 2h to get the grain boundary diffusion.

• Korean Journal of Microbiology
• /
• v.32 no.2
• /
• pp.155-162
• /
• 1994

Cells of Acinetobacter sp. strain JC1 DSM 3803, an aerobic monoxide-oxidizing bacterium, growing on glucose exhibited high catalase activity at the mid-exponential growth phase. The enzyme activity decreased gradually after then until the early stationary phase, increased again at the mid-stationary phase, and then decreased again thereafter. Cells growing on glucose was found to contain three kinds of catalses. Cat1, Cat2 and Cat3. The activities of Cat1 and Cat3 did change significantly during growth, but that of Cat2 exhibited significant variation. Cat3 was found to present only in cells growing on glucose, but not in cells growing on carbon monoxide of methanol. The activities of call and Cat3 in cell-free extracts were stable upon treatment with ethanol and chloroform, but decreased to some extent when the enzymewere treated with 2mM $H_2O_2$ and/or 3-amino-1,2,4-triazole (AT). Cat2 was found to be extremely sensitive to the ethanol-chloroform and $H_2O_2$ treatments, but was insensitive to the AT treatment. Cat1 exhibited enzyme activity after incubation for 1 min at 80$^{\circ}C$. Cat2 and Cat3 did not show enzyme activity after incubation for 1 min at 60$^{\circ}C$ and 70$^{\circ}C$, respectively. Cat2 was found to have peroxidase activity. Cat3 was purified to homogenity in seven steps. The molecular weight of the native enzyme was estimated to be 150,000. Sodium dodecyl sulfate-gel electrophoresis revealed two identical subunits of molecular weight 65,000. The enzyme was found to show two $K_m$ values of 39 mM and 58mM. The optimal pH for the enzyme activity was 7.0, but the activities at pH 6.0, 8.0, and 9.0, were found to be comparable to that at the optimal pH. The optimal temperature for the enzyme activity was found to be 40$^{\circ}C$. The enzyme also exhibited strong activity at 20$^{\circ}C$, 30$^{\circ}C$, and 50$^{\circ}C$. The purified enzyme was not affected by the ethanol-chloroform treatment. The enzyme, howerver, showed less than 10% of the original activity when it was treated with 12 mN AT, 0.1 mM $NaN_3$ of 1mM KCN.

• Korean Journal of Crystallography
• /
• v.10 no.2
• /
• pp.119-124
• /
• 1999

X-선 회절법을 이용하여 3,6-bis(6'-methyl-2'pyridyl)pyridazine을 리간드로 한 Zn(Ⅱ) 착물인 [3,6-bis(6'-methyl-2'pyridyl)pyridazine]ZnCl2 (C16H16N4·ZnCl2)의 결정구조를 규명하였다. 이 결정의 결정계는 Monoclinic이며 공간군은 P21/a이다. 단위포 상수는 a=15.053(7) Å, b=14.594(7) Å, c=7.628(3) Å이며, β=93.92(4)°, V=1671.9(13) Å3, T=293(2)K, Z=4, Dc=1.594 Mgm-3이다. 회절반점들의 세기는 Enraf-Nonius CAD-4 diffractometer로 얻었으며 Mo Kα선(λ=0.71073 Å)을 사용하였다. 분자구조는 직접법으로 풀었으며, Fo>4σ (Fo)인 1750개의 독립 회절 데이터에 대하여 최소승자법으로 정밀화하여 최종 신뢰도 값 R=8.31%을 얻었다.

• Korean Journal of Microbiology
• /
• v.40 no.3
• /
• pp.199-204
• /
• 2004

The parathion hydrolase (OPH) produced by Pseudomonas rhodesiae H5 was purified by ammonium sulfate precipitation, DEAE-Toyopearl 650M ion exchange chromatography and Sephadex gel filtration chromatography. Parathion hydrolase from crude extracts of P. rhodesiae H5 has two components designated as OPH $I_1$ and OPH $I_2$, Optimum pH and temperature of OPH $I_1$and OPH $I_2$ were pH 7.2 and $30^{\circ}C$, and pH 7.6 and $37^{\circ}C$, respectively. The activation energy of OPH $I_1$ for the hydrolysis of parathion was 3.01 ㎉/I, II, III in the temperature range of $4^{\circ}C$ to $30^{\circ}C$, and Michaelis constant ($K_m$) for parathion was 69.2 ${\mu}M$. The activation energy of OPH $I_2$ for the hydrolysis of parathion was 4.07㎉/㏖ in the temperature range of $4^{\circ}C$ to $37^{\circ}C$, and Michaelis constant for parathion was 150.9${\mu}M$. Furthermore OPH $I_1$ was completely inhibited by 1 mM $Ca^2+$, $Cu^2+$, $Mg^2+$, $Ni^2+$, but OPH $I_2$ was less inhibited than OPH $I_1$ by the metals used in this study.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.44 no.4
• /
• pp.479-482
• /
• 1995

In this study, to improve sintering condition, anisotropic properties ( $k_{t}$/ $k_{p}$) of electromechanical coupling coefficient and piezoelectric constant $d_{h}$ and $g_{h}$, Mn $O_{2}$ impurity was added to the (P $b_{0.76}$C $a_{0.24}$)[( $Co_{1}$2/ $W_{1}$2/)$_{0.04}$ $Ti_{0.96}$] $O_{3}$ ceramics for application to hydrophone devices. Electromechanical coupling coefficients of the specimen with 1.5 [mol%] Mn $O_{2}$ sintered at 1150.deg. C were $k_{t}$=49% and $k_{p}$ = O, which exibited the highest value in piezoelectric anisotropic properties (kt/kp). Without relations with sintering temperature, the highest value of hydrostatic piezoelectric constant $d_{h}$ & $g_{h}$ were shown at the specimen with 1.5 [mol%] Mn $O_{2}$. Accordingly, the best addition amount of Mn $O_{2}$ was 1.5 [mol%] and proper sintering temperature was 1150.deg. C. Hydrostatic piezoelectric constant values of $d_{h}$=64.52[10$^{-12}$ C/N], $g_{h}$=35.92[10$^{-3}$ Vm/N] in the above condition were effectiely extended for hydrophone applications.pplications.ons.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.59-64
• /
• 2023

In this paper, It is proposed through the empirical design of a Conducted EMI filter for noise reduction of power used in electronic devices. For the proposed structure, A-type, B-type, C-type, and D-type structures were designed, and conductive noise reduction was confirmed by using an LC network with various X-capacitors, Y-capacitors, and Air-inductors. 10 [μH] was used for L1 and L2, and 4.7 [nF] was used for C1 and C2. L3 for common mode used 13[μH], and C5, C6, C7 were designed using 10[nF]. The measured insertion loss values of the designed EMI filter were -74.4[dB] at 3.2MHz, -75.4[dB] at 4MHz, and -75.3[dB] at 13.56MHz. Therefore, the proposed EMI filter will be able to reduce power supply noise used in various electronic devices.