• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.1
• /
• pp.89-97
• /
• 2013

With regard to complex-shaped tall buildings whose plans and constructions have been gradually on the increase, this study was aimed to analyze their structural behaviors during construction by applications of construction sequences analyses to prototype models. For twisted tall buildings, total 18 models of with three conditions of a lateral load-resisting system, a twisting angle, and a construction method were selected. A diagrid system and a braced tube system were applied as a lateral load-resisting system. For each lateral load-resisting system, three types of plan with $0^{\circ}$, $1^{\circ}$, and $2^{\circ}$ twisting angles and three construction methods with construction sequences of exterior tube and interior frame were assumed. The structural performances of tall buildings under constructions were analyzed with results of lateral displacements from construction sequence analyses. Also, construction performances of the construction period and the maximum lift weight were compared.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.10
• /
• pp.1247-1255
• /
• 2016

The safety and autonomous flight function of micro UAV or drones is crucial to its commercial application. The requirement of own building stable drones is still a non-trivial obstacle for researchers that want to focus on the intelligence function, such vision and navigation algorithm. The paper present a GCS using commercial drone and hardware platforms, and open source software. The system follows modular architecture and now composed of the communication, UI, image processing. Especially, lane-keeping algorithm. are designed and verified through testing at a sports stadium. The designed lane-keeping algorithm estimates drone position and heading in the lane using Hough transform for line detection, RANSAC-vanishing point algorithm for selecting the desired lines, and tracking algorithm for stability of lines. The flight of drone is controlled by 'forward', 'stop', 'clock-rotate', and 'counter-clock rotate' commands. The present implemented system can fly straight and mild curve lane at 2-3 m/s.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.2
• /
• pp.1-17
• /
• 2021

As population concentration, high-rise, and high-density progresses amid rapid industrialization and urbanization in Korea, green areas in the city have decreased significantly and the natural environment has deteriorated day by day due to various development projects. In order to cope with these social changes, many studies related to park and green areas have been conducted, but in the case of Gwangju-si, only studies on green areas such as vegetation structures, street facilities, and recreation forests have been conducted on park green areas. The situation is not losing. Therefore, in this study, a survey was conducted on Gwangju citizens to understand the usage behavior and satisfaction of park green areas, and to provide basic data for future park development and reorganization. As a result, first, to induce a variety of static and dynamic activities in order to increase the park satisfaction of Gwangju citizens, it is possible to create a park that has not been formed as soon as possible, and by planning programs with various themes. Second, it is necessary to expand green space services in marginalized areas by creating water streams, flower pots, and rooftop greening around the lives of Gwangju citizens, and create park green spaces with themes using cultural and historical resources for each administrative district. Third, in order to solve the dry landscape in some urban areas, it is necessary to establish a three-dimensional landscape plan by creating a variety of green areas such as potted plants, green areas, and street trees, and by giving functions of park green areas such as expanding leisure and convenience facilities.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.2
• /
• pp.21-28
• /
• 2019

Handmade hydrated lime has been used for preservation and repair of architectural heritage in Korea. However, the effect of the amount of water used for slaking quicklime on the physical and chemical properties of the hydrated lime, which is the result of the slaking process, has not been clearly understood. In this study, particle size distribution, chemical composition and crystalline phases of the hydrated lime are investigated by varying the amount of water used for the slaking. In addition, temperature history during the slaking process is examined. For this, various experiments, such as laser diffraction analysis, X-ray fluorescence, X-ray diffraction, thermogravimetric analysis, and temperature recording using a thermocouple, were performed. When the quicklime came into contact with water, its temperature reached $100^{\circ}C$ within 10 min due to sudden exothermic reaction of calcium oxide, and this temperature was maintained for about 30 min. The water to lime ratio influenced the cooling rate during the slaking process; that is, the more water was used, the longer it took to reach an ambient temperature. The amount of water for the slaking did not have a noticeable effect on the contents of major components of the hydrated lime such as calcium hydroxide and calcium carbonate, but when slaked with more amount of water, average particle size of the lime tended to decrease. The experimental results in this study can be used as references for developing guidelines on the safety or appropriate amount of water in the lime slaking process.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.4
• /
• pp.257-268
• /
• 2021

This study analyzed the major issues of 24 defect litigation precedents before and after 2013, based on 2013, when defect litigation in relation to the rapidly increasing defect disputes in apartment houses. The amount of defect removal per household is 2,572 thousand won per household, which is about 5% less than before 2013 from 2013, but the judgment amount per household has rather increased by about 19%, showing 1,916 thousand won per household after 2013. By type of construction, defects on cracks accounted for the largest proportion before and after 2013. Before 2013, equipment, tiles, and windows appeared in the order, and after 2013, landscaping, tiles, insulation and window work were in the order. In order to prevent such defect disputes, efforts to prevent defect disputes will be needed in the design stage, construction stage, and maintenance stage.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1067-1074
• /
• 2022

An architect creates his/her design to meet owner's requirements. Floor plans, perspective drawings, and scale models are used in order for the owner to choose the design. The tools are a little helpful for communication between the architect and the owner in case the owner does not know architecture. The scale models are good, but it is hard to make scale models while design is in progress. 3D CAD is a good tool for communication, but it is time-consuming and requires high-performance computer hardware. Augmented reality is able to show 3D virtual models that are updated by the architect with smart devices such as a smart phone and a tablet PC. The owner frequently reviews the updated design anytime anywhere. This study proposes a method to use augmented reality for architectural design and construction management. The method supports the communication between the owner, the architect and the contractor to review updated designs, and to complete the building project. 3D models expressed in augmented reality are created using SketchUp with 2D drawings for building construction. An Android application implementing augmented reality is developed by Qualcomm Vuforia and Unity on smart devices. Drawings as markers and 3D models are connected in Unity. And functions that temporarily hide unnecessary parts can be implemented in C# programming language. If an owner, an architect, or a contractor looks at a smart phone on a 2D drawing, he/she can identify building elements such as 3D buildings or columns on a screen. This can help communication between them.

• Korean Journal of Plant Resources
• /
• v.19 no.1
• /
• pp.180-188
• /
• 2006

This study was carried out to offer the raw data on the method of cultivation and ecological characteristic by systematical analysing habitat environment of Tulipa edulis that was expected as medicinal and ornamental resource. The habitat environment was that the altitude was 245 m, the aspect of south, the size of approximately $49\;m^2$, and there was analyzed that Tulipa edulis grew wild in the dryly sunny spot. The vascular plants were summarized as 62 taxa; 28 families, 59 genera, 50 species, 11 varieties and 1 forms, and the resource plants were classified that there were 23 taxa of ornamental plants(37.1%), 43 taxa of edible plants(69.4%), 34 taxa of medicinal plants(54.8%) and 29 taxa of others(46.8%). In the results of soil factors analysis, there showed that acidity was pH 4.9, organic matter content of 4.9%, available $P_{2}O_{5}$ of 3.6 mg/kg, exchangeable $K^+$ of $0.5\;cmol^{+}/kg$, exchangeable $Ca^{2+}$ of $3.0\;cmol^{+}/kg$, exchangeable $Mg^{2+}$ of $0.8\;cmol^{+}/kg$, cation exchange capacity(C.E.C) of $12.3\;cmol^{+}/kg$ and electrical conductivity(EC) of 0.3 dS/m. In the results of correlation analysis between soil factors, exchangeable $Ca^{2+}$ and C.E.C were highly correlative. The growth characteristics of Tulipa edulis were surveyed that height was 7.6 cm, leaf width of 0.6 cm, leaf length of 12.7 cm, flower width of 2.8 cm, peduncle of 5.4 cm and chlorophyll of $34.7\;{\mu}g\;mg^{-1}$. In the results of correlation analysis between growth characteristics, height and peduncle were highly correlative. In the results of correlation analysis between soil factors and growth characteristics, exchangeable $K^{+}$ and leaf length were high relativity but they were confirmed negative relation. In the results of growth model analysis, R-square of leaf width and exchangeable $K^{+}$ was some 86.4% and that of chlorophyll and exchangeable $K^{+}$ was some 83.7%.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.3
• /
• pp.100-114
• /
• 2018

Nationally designated Cultural Properties 'Scenic site No.12 Maisan Mountain, Jinan' designated areas and some protected areas, and taking into account the dynamics of naturalized plants causing problems, we will restore the original vegetation scenery of Mt. Maisan. The results of this study are as follows. A total of 76 families, 192 genera, 286 taxa, and inland and inhabited areas, 76 and 138 genera and 163 taxa were identified in the areas of Ammaibong. The total number of naturalized plants identified in this study area is 28 taxa total, which corresponds to 7.1% naturalization rate(NR) among the vascular plants of all 395 taxa, and the urbanization index(UI) corresponds to 8.4% of the 333 taxa of Korean naturalized plants. Ecosystem disturbance plants identified in the survey area were Ambrosia artemisiifolia 1 taxa. The naturalized plants controlled and managed by separate anthropogenic vegetation management within the designation and protection area of Maisan scenic place are three species of herbaceous Rumex acetosella, A. artemisiifolia and Festuca arundinacea. It was identified as a breed. Indigofera bungeana and F. arundinacea communities around the stairway and Amorpha fruticosa, I. bungeana, A. artemisiifolia and Amaranthus patulus of the top of Am-Maibong were selected as the first priority sites for exclusion of exotic species in Maisan area and target naturalized plants species to the Ammaibong peak. In addition, R. acetosella community around the temple was suggested to be removed first to preserve endemic species. For the restoration of vegetation, we suggest that Stephanandra incisa, Spiraea blumei, Weigela subsessilis, etc. should be planted after removal of I. bungeana, and F. arundinacea, C. lanceolata, Carex callitrichos var. nana.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.98-104
• /
• 2011

Numerical simulation in exploration geophysics provides important insights into subsurface wave propagation phenomena. Although elastic wave simulations take longer to compute than acoustic simulations, an elastic simulator can construct more realistic wavefields including shear components. Therefore, it is suitable for exploration of the responses of elastic bodies. To overcome the long duration of the calculations, we use a Graphic Processing Unit (GPU) to accelerate the elastic wave simulation. Because a GPU has many processors and a wide memory bandwidth, we can use it in a parallelised computing architecture. The GPU board used in this study is an NVIDIA Tesla C1060, which has 240 processors and a 102 GB/s memory bandwidth. Despite the availability of a parallel computing architecture (CUDA), developed by NVIDIA, we must optimise the usage of the different types of memory on the GPU device, and the sequence of calculations, to obtain a significant speedup of the computation. In this study, we simulate two- (2D) and threedimensional (3D) elastic wave propagation using the Finite-Difference Time-Domain (FDTD) method on GPUs. In the wave propagation simulation, we adopt the staggered-grid method, which is one of the conventional FD schemes, since this method can achieve sufficient accuracy for use in numerical modelling in geophysics. Our simulator optimises the usage of memory on the GPU device to reduce data access times, and uses faster memory as much as possible. This is a key factor in GPU computing. By using one GPU device and optimising its memory usage, we improved the computation time by more than 14 times in the 2D simulation, and over six times in the 3D simulation, compared with one CPU. Furthermore, by using three GPUs, we succeeded in accelerating the 3D simulation 10 times.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.228-235
• /
• 2004

The development and proliferation of the mandibular condyle can be altered by changes in the biomechanical environment of the temporomandibular joint. The biomechanical loads were varied by feeding diets of different consistencies. The purpose of the present study was to determine whether changes of masticatory forces by feeding a soft diet can alter the trabecular bone morphology of the growing mouse mandibular condyle, by means of micro-computed tomography. Thirty-six female, 21 days old, C57BL/6 mice were randomly divided into two groups. Mice in the hard-diet control group were fed standard hard rodent pellets for 8 weeks. The soft-diet group mice were given soft ground diets for 8 weeks and their lower incisors were shortened by cutting with a wire cutter twice a week to reduce incision. After 8 weeks all animals were killed after they were weighed. Following sacrifice, the right mandibular condyle was removed. High spatial resolution tomography was done with a Skyscan Micro-CT 1072. Cross-sections were scanned and three-dimensional images were reconstructed from 2D sections. Morphometric and nonmetric parameters such as bone volume(BV), bone surface(BS), total volume(TV), bone volume fraction(BV/TV), surface to volume ratio(BS/BV), trabecular thickness(Tb. Th.), structure model index(SMI) and degree of anisotropy(DA) were directly determined by means of the software package at the micro-CT system. From directly determined indices the trabecular number(Tb. N.) and trabecular separation(Tb. Sp.) were calculated according to parallel plate model of Parfitt et al.. After micro-tomographic imaging, the samples were decalcified, dehydrated, embedded and sectioned for histological observation. The results were as follow: 1. The bone volume fraction, trabecular thickness(Tb. Th.) and trabecular number(Tb. N.) were significantly decreased in the soft-diet group compared with that of the control group (p<0.05). 2. The trabecular separation(Tb. Sp.) was significantly increased in the soft-diet group(p<0.05). 3. There was no significant differences in the surface to volume ratio(BS/BV), structure model index(SMI) and degree of anisotropy(DA) between the soft-diet group and hard-diet control group (p>0.05). 4. Histological sections showed that the thickness of the proliferative layer and total cartilage thickness were significantly reduced in the soft-diet group.