• Korean Journal of Microbiology
• /
• v.29 no.6
• /
• pp.380-386
• /
• 1991

Three types of soluble cytochrome c were purified to homogeneity from Methylobacillus sp. strain SK1 which grows only on methanol. Cytochrome c-I was purified 58.5-fold in seven steps. Cytochrome c-II and c-III were purified 57.3- and 122.1-fold in eight steps, respectively. The molecular weights of the cytochrome c-I was determined to be 12,500, while those of the cytochrome c-II and c-III were 16,000. The isoelectric points of the c-I, c-II and c-III were found to be 8.8, 6.6, and 6.6 respectively. The spectrum of reduced cytochrome c-I showed .alpha.-, .betha.-, .gamma.-peaks at 551.4, 522.2, and 416.6nm. The peaks for c-II were found at 551.0, 521.6, and 416.5nm, while those for c-III were shown at 551.2, 521.8, and 416.0 nm. The spectra of oxidized cytochrome c-I, c-II, and c-III showed .gamma.-peak at 411.8, 409.0, and 410.2 nm, respectively. The absorption coefficients of .alpha.- and .gamma.-peak for c-I in the reduced state were determined as 47 and 197 $mM^{-1}$ $cm^{-1}$ , respectively. The coefficients of .alpha.- and .gamma.-peak for c-II were determined to be 43 and 137 $mM^{-1}$ $cm^{-1}$ , while those for c-III were 41 and 172 $mM^{-1}$ $cm^{-1}$ , respectively. The c-I and c-III were found to bind carbon monoxide.

• Korean Journal of Materials Research
• /
• v.31 no.12
• /
• pp.682-689
• /
• 2021

NbC, HfC, TaC, and their solid solution ceramics have been identified as the best materials for ultrahigh-temperature ceramics. However, their structural stability and elastic properties are mostly unclear. Thus, we investigated structure and elastic properties of (Nb_1-xTa_x)C and (Nb_1-xHf_x)C solid solutions via ab initio calculations. Our calculated results show that the stability of (Nb_1-xTa_x)C and (Nb_1-xHf_x)C increases with the increase of Hf and Ta content, and (Nb_1-xHf_x)C is more stable than (Nb_1-xTa_x)C at the same content of Hf and Ta. The lattice constants decrease with increasing of Hf and Ta content. (Nb_1-xTa_x)C and (Nb_1-xHf_x)C carbides are mechanically stable and brittle. Bulk modulus of (Nb_1-xTa_x)C increases with increasing Ta content. In contrast, bulk modulus of (Nb_1-xHf_x)C decreases with increasing Hf content. Hardness of solid solutions shows the highest values at the (Nb_0.25Ta_0.75)C and (Nb_0.75Hf_0.25)C. In particular, (Nb_0.75Hf_0.25)C shows the highest hardness for the current system. The results indicate that the overall mechanical properties of (Nb_1-xHf_x)C solid solutions are superior to those of (Nb_1-xTa_x)C solid solutions. Therefore, controlling the Hf and Ta element and content of the (Nb_1-xTa_x)C and (Nb_1-xHf_x)C Solid solution is crucial for optimizing the material properties.

• Korean Journal of Agricultural Science
• /
• v.18 no.2
• /
• pp.119-126
• /
• 1991

The lipid fractions, lipid classes and free fatty acids in total lipids from cheese and soybeans were analyzed by column, thin-layer and gas chromatographies. The percentages of neutral lipid, glycolipid and phospholipid in cheese were 96.2, 1.1 and 0.7, whereas those in soybeans were 87.5, 0.5 and 4.3. Major lipid classes of total lipid, and neutral lipid were triglyceride, fatty acid, cholesterol, diglyceride, monoglyceride and polar lipid, and those of glycolipid and phospholipid were triglyceride, diglyceride, monoglyceride and polar lipid in total lipid from cheese. Large amounts of triglyceride and polar lipid and small amounts of diglyceride, monoglyceride and polar lipid were detected in all lipid fractions from soybeans. The higher proportion of C4:0, C6:0, C8:0, C10:0, C12:0, C14:0, C16:0, C16:1, C18:0, C18:1 and C18:2 fatty acids were found in total lipid from cheese, whereas those of C18:0, C18:2 and C18:3 fatty acids were found in total lipid from soybeans. Most predominant fatty acids are C16:0 for the total lipid of cheese and C18:2 for the total lipid of soybeans. The lower proportions of C14:1, C15:0, C17:0 and C20:0 fatty acids in total lipid from cheese and C4:0, C6:0, C10:0 and C18:0 in total lipid from soybeans were detected.

• The Korean Journal of Physiology and Pharmacology
• /
• v.28 no.2
• /
• pp.113-120
• /
• 2024

Solute carrier 40A1 (SLC40A1) encodes ferroportin, which is the only known transmembrane protein that exports elemental iron from mammalian cells and is essential for iron homeostasis. Mutations in SLC40A1 are associated with iron-overload disorders. In addition to ferroportin diseases, SLC40A1 expression is downregulated in various cancer types. Despite the clinical significance of the SLC40A1 transporter, only a few studies have investigated genetic variants in SLC40A1. The present study was performed to identify genetic variations in the SLC40A1 promoter and functionally characterize each variant using in vitro assays. We investigated four haplotypes and five variants in the SLC40A1 promoter. We observed that haplotype 3 (H3) had significantly lower promoter activity than H1, whereas the activity of H4 was significantly higher than that of H1. Luciferase activity of H2 was comparable to that of H1. In addition, four variants of SLC40A1, c.-1355G>C, c.-662C>T, c.-98G>C, and c.-8C>G, showed significantly increased luciferase activity compared to the wild type (WT), whereas c.-750G>A showed significantly decreased luciferase activity compared to the WT. Three transcription factors, cAMP response element-binding protein-1 (CREB-1), chicken ovalbumin upstream promoter transcription factor 1, and hepatic leukemia factor (HLF), were predicted to bind to the promoter regions of SLC40A1 near c.-662C>T, c.-98G>C, and c.-8C>G, respectively. Among these, CREB1 and HLF bound more strongly to the variant sequences than to the WT and functioned as activators of SLC40A1 transcription. Collectively, our findings indicate that the two SLC40A1 promoter haplotypes affect SLC40A1 transcription, which is regulated by CREB-1 and HLF.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.3
• /
• pp.203-208
• /
• 1976

The composition of fatty acids and sterols in the muscle lipid of eel, Anguilla japonicus Temminck & Schlegel was investigated quantitatively by using gas liquid chromatography(GLC) and the sterols separated from unsaponifiable matter by thin-layer chromatography were identified by GLC, infrared spectroscopy, nuclear magnetic resonance and GLC-mass spectrometry respectively. The fatty acids of the muscle lipid consisted of the large amount of C18:1 $(40.98\%)$, $C16:0(23.71\%)$, $C16:1(13.37\%)$ acids, and small amount of $C14:0(7.19\%),\;C18:0(5.55\%),\;C20:1(1.83\%),\;18:2(1.42\%)$ acids, and $C18:3(0.92\%),\;C15:0(0.73\%),\;C14:1(0.50\%)$ acids were smaller, Choleterol$(96.58\%)$ was a major component of the sterol fraction and 24-methylene cholesterol $(3.42\%)$ was also detected as a minor component.

• Korean journal of applied entomology
• /
• v.11 no.1
• /
• pp.41-43
• /
• 1972

1. In order to investigate the epidemic outbreak of rice blast disease on the resistant variety Kwankon in 1969, this investigation was undertaken as a basis for breeding resistant varieties. 2. The 16 isolates collected from Kyunggi area were inoculated at the 3-4 leaf stage on 12 Japanese differential varieties used for identifying races under greenhouse conditions. Out of 16 isolates 15 were identified as C race group and one as N race group. Of the 15 rates, nine were C-8, two were C-7 and two were C-1. Of the remaining two isolates, one was similar to C-1, and the other was similar to C-5. 3. It is concluded that the epidemic in the resistant variety 'Kwanok' was due to the occurrence of the C race group, which can infect the Chinese type varieties.

• Journal of Plant Biology
• /
• v.11 no.1
• /
• pp.33-37
• /
• 1968

Present investigation was carried out in order to make clear the fertility, morphological characters, and chromosome numbers of interspecific hybrids of Chrysanthemum Zauadskii, C. indicum, and C. lavandulaefolium. 1. Hybrids were not self-pollinated. When sib-crossed the fertility was 1.3~19.3%. 2. F2 individuals were variable in their morphological Characters. 3. Chromosome numbers of three putative parents were different from those reported previously: C. zawadskii 2n=36, C. indicum 2n=20, C. lavandulaefolium 2n=16, $C. indicum{\times}C. zawadskii 2n=28, C. zawadskii{\times}C. indicum-1 2n=28, C. zawadskii{\times}C. indicum-2 2n=28, C. zawadskii{\times}C. indicum-3 2n=28, C. zawadskii{\times}C. indicum-4 2n=28, C. zawadskii{\times}C. indicum-5 2n=28, C. zawadskii {\times}C. lavandulaefolium-1 2n=26, C. zawadskii{\times}C. lavandulaefolium-2 2n=26.$

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.32-38
• /
• 2023

In this study, the electrochemical properties of dopamine coated silicon/silicon carbide/carbon(Si/SiC/C) composite materials were investigated to improve cycle stability and rate performance of silicon-based anode active material for lithium-ion batteries. After synthesizing CTAB/SiO₂ using the Stöber method, the Si/SiC composites were prepared through the magnesium thermal reduction method with NaCl as heat absorbent. Then, carbon coated Si/SiC anode materials were synthesized through polymerization of dopamine. The physical properties of the prepared Si/SiC/C anode materials were analyzed by SEM, TEM, XRD and BET. Also the electrochemical performance were investigated by cycle stability, rate performance, cyclic voltammetry and EIS test of lithium-ion batteries in 1 M LiPF₆ (EC: DEC = 1:1 vol%) electrolyte. The prepared 1-Si/SiC showed a discharge capacity of 633 mAh/g and 1-Si/SiC/C had a discharge capacity of 877 mAh/g at 0.1 C after 100 cycles. Therefore, it was confirmed that cycle stability was improved through dopamine coating. In addition, the anode materials were obtain a high capacity of 576 mAh/g at 5 C and a capacity recovery of 99.9% at 0.1 C/0.1 C.

• Journal of International Academy of Physical Therapy Research
• /
• v.7 no.1
• /
• pp.908-914
• /
• 2016

The purpose of this study is to explore the effects of mobilization of C0-C1 and C7-T1 applied to asymptomatic individuals with reduced upper cervical rotation during the FRT. Design: parallel randomized controlled trial. 48 subjects(38.52 years${\pm}15.13$) with C1-C2 rotation hypomobility in TFR joined the study and were randomized into three groups(C0, C7, control group). FRT in both directions was measured before and after the intervention. C0 intervention consisted of a dorsal translatoric mobilization of C0-C1 in the cervical neutral position. C7 intervention consisted of a ventral cranial translatoric mobilization of C7-T1 in neutral position and the control group maintained a supine position. C0 group experienced a FRT ROM to the restricted side increase of $17.64^{\circ}$(SD=4.55), that was significantly greater (P<0.001) than $5.95^{\circ}$(SD=4.81) of the C7 group and $2.45^{\circ}$(SD=5.05) of the control group. The results showed that a dorsal translatoric mobilization of C0-C1 in neutral position restored the physiological FRT mobility in subjects with C1-C2 hypomobility and experienced statistical significant improvement in FRT as compared to a C7-T1 translatoric mobilization and a control group. (Level of evidence: 1b).

• Journal of Korean Neurosurgical Society
• /
• v.57 no.6
• /
• pp.460-464
• /
• 2015

Objective : Bilateral C1 lateral mass and C2 pedicle screw fixation (C1LM-C2P) is an ideal technique for correcting atlantoaxial instability (AAI). However, the inevitable situation of vertebral artery injury or unfavorable bone structure may necessitate the use of unilateral C1LM-C2P. This study compares the fusion rates of the C1 lateral mass and C2 pedicle screw in the unilateral and bilateral methods. Methods : Over five years, C1LM-C2P was performed in 25 patients with AAI in our institute. Preoperative studies including cervical X-ray, three-dimensional computed tomography (CT), CT angiogram, and magnetic resonance imaging were performed. To evaluate bony fusion, measurements of the atlanto-dental interval (ADI) and CT scans were performed in the preoperative period, immediate postoperative period, and postoperatively at 1, 3, 6, and 12 months. Results : Unilateral C1LM-C2P was performed in 11 patients (44%). The need to perform unilateral C1LM-C2P was due to anomalous course of the vertebral artery in eight patients (73%) and severe degenerative arthritis in three patients (27%). The mean ADI in the bilateral group was 2.09 mm in the immediate postoperative period and 1.75 mm in 12-months postoperatively. The mean ADI in the unilateral group was 1.82 mm in the immediate postoperative period and 1.91 mm in 12-months postoperatively. Comparison of ADI measurements showed no significant differences in either group (p=0.893), and the fusion rate was 100% in both groups. Conclusion : Although bilateral C1LM-C2P is effective for AAI from a biomechanical perspective, unilateral screw fixation is a useful alternative in patients with anatomical variations.