• Journal of Life Science
• /
• v.22 no.3
• /
• pp.306-311
• /
• 2012

A gene encoding a lipase, lipT, was cloned from the psychrotrophic bacterium Pseudomonas mandelii and sequenced. An open reading frame of 1,686 bp was found that encodes a polypeptide consisting of 562 amino acid residues. Sequence analysis revealed a Gly-His-Ser-Leu-Gly sequence, which matches the consensus Gly-X-Ser-X-Gly motif conserved among lipolytic enzymes. The recombinant LipT protein was predominantly expressed as inclusion bodies in Escherichia coli and subsequently purified by nickel-chelate affinity chromatography. A small fraction of LipT was refolded, and the subsequent LipT exhibited substrate preferences for p-nitrophenyl butyrate (C4) and p-nitrophenyl octanoate (C8).

• Korean Journal of Agricultural Science
• /
• v.40 no.3
• /
• pp.227-235
• /
• 2013

This study was conducted to prove the effect of irradiation on lipases (lipase AK, lipase AH, lipase PS-D, Lipozyme TLIM, Lipozyme RMIM and Novozyme SP435) which were used for interesterification reaction using batch type reactor. Through such interesterification, structured lipid (1(3)-palmitoyl-2-oleoyl-3(1)-stearoyl, POS) was synthesized by lipase treated with irradiation at different doses (0, 3, 7, 14, 29 and 59 kGy) using canola oil, palmitic ethyl ester (PEE) and stearic ethyl ester (StEE). After the reaction, fatty acid composition of triacylglycerol (TAG) in structured lipid was analyzed to compare the lipase activity. The results showed that activity of the irradiated lipase AH, PS-D and Novozyme SP435 with certain dose (3 kGy) were slightly improved. Such change of lipase activity suggested that irradiation might affect on the interesterification properties. Especially, Lipase AK, Lipozyme TLIM and Lipozyme RMIM after at 3 kGy irradiation showed that content of stearic acid ($C_{18:0}$) was increased while palmitic acid ($C_{16:0}$) decreased in the interesterified products.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.6
• /
• pp.951-956
• /
• 2001

A 28-kDa extracellular lipase (pI 8.7) was purified to homogeneity from the culture supernatant of Trichosporon sp. Y- 11 by mmonium sulfate precipitation, DEAE-Sephadex A-50, Bio-Gel P-30, CM- Sephadex C-50, and Bio-Gel P- 10 chromatographies. The purified enzyme exhibited a specific activity of $2,741{\;}{\mu}mol/min/mg$ based on the hydrolysis of triolein, and the optimal hydrolysis activity was dentified at pH 8.0 and $40^{\circ}C$. The enzyme activity was inhibited by $Ag^+$ and enhanced by $Fe^{2+}$, $Fe^{3+}$, $Mg^{2+}$, $Mn^{2+}$, and $Li^{+}$. The enzyme activity exhibited for the hydrolysis of both tributyrin and trilinolein. The ester synthesis of unsaturated fatty acids with various alcohols catalyzed by the purified lipase in a nonaqueous medium or microaqueous system was also investigated. The esterification activity of the lipase increased with an increase of the carbon chain length in the alcohol. The synthesis rate of linoleic acid and oleyl alcohol was the highest with an optimal temperature and pH of $40^{\circ}C$ and 8.0, respectively. The water content and agitation also affected the esterification activity of the lipase.

• Microbiology and Biotechnology Letters
• /
• v.33 no.1
• /
• pp.29-34
• /
• 2005

Lipase-producing bacteria (S3) were isolated from intertidal flat at Saemanguem. A isolated strain was identified as Psychrobacter species by physiological and fermentational characterization as well as 16S rRNA analysis. The strain was then named as Psychrobacter sp. S3. P. sp. S3 grew most rapidly at $30^{\circ}C$, but grew well even at $10^{\circ}C$ and its lipase activity was most high when cultivated at $20^{\circ}C$. Lipase S3 had optimum temperature of $30^{\circ}C$ for the hydrolysis of p-nitrophenyl caproate and had more than $80^{\circ}C$ activity even at $10^{\circ}C$. The activation energy was calculated to be 1.5 kcal/mol, which showed that it was a typical cold-adapted enzyme. It was an alkaline enzyme with optimum pH of $9.0\~9.5$. It could hydrolyze various length of triglycerides. Among them, it hydrolyzed most rapidly $C_4,\;C_{14},\; C_{16}-length$ triglycerides. When added to tributyrin-agarose gel, lipase S3 hydrolyzed tributyrin most rapidly at 30 and $40^{\circ}C$, but it could hydrolyze well even at $4^{\circ}C$.

• Mycobiology
• /
• v.38 no.1
• /
• pp.52-57
• /
• 2010

To develop a potent anti-obesity lipase inhibitor from mushroom, the lipase inhibitory activities of various mushroom extracts were determined. Methanol extracts from Phellinus linteus fruiting body exhibited the highest lipase inhibitory activity (72.8%). The inhibitor was maximally extracted by treatment of a P. linteus fruiting body with 80% methanol at $40^{\circ}C$ for 24 hr. After partial purification by systematic solvent extraction, the inhibitor was stable in the range of $40\sim80^{\circ}C$ and pH 2.0~9.0. In addition to lipase inhibitory activity, the inhibitor showed 59.4% of superoxide dismutase-like activity and 56.3% of acetylcholinesterase inhibitory activity.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.65-68
• /
• 2003

The paper discusses the use of stable emulsion, prepared by membrane emulsification technology, to improve the enantiocatalytic performance of immobilised lipase in multiphasic membrane reactors. The production of optical pure (S)-naproxen from racemic naproxen methyl ester has been used as model reaction system. The enzyme was immobilised in the sponge layer (shell side) of capillary polyamide membrane with 50 kDa cut-off, The O/W emulsion, containing the substrate in the organic dispersed phase, was fed to the enzyme membrane reactor from shell-to-lumen. The results evidenced that lipase maintained stable activity during all the operation time (more than 250 hours), showing an enantiomeric excess (96 $\pm$2%) comparable to the free enzyme (98 $\pm$ 1%) and much higher compared to similar lipase-loaded membrane reactors used in two-separate phase systems (90%). The study showed that immobilised enzymes can achieve high stability as well as high catalytic activity and enantioselectivity.

• KSBB Journal
• /
• v.14 no.6
• /
• pp.696-701
• /
• 1999

The enzymatic hydrolysis of Castor oil for the mass production of ricinoleic acid was studied to find out the optimum conditions such as solvents and the weight ratio of substrate to enzyme. Three different lipases were tested for the hydrolysis of castor oil: lipase from Porcine Pancrease(lipsase PP), lipase from Candida cylindracea(lipase CC), lipase from Candida Rugosa(lipase CR). The poor mass transfer in water caused a low degree of hydrolysis of castor oil. To overcome this problem, organic solvents were used. Among organic solvents tested, hydrophobic solvents gave better results of hydrolysis than hydrophilic solvents. Organic solvents also lowered or changed the effect of pH. Isopropyl ether made complete hydrolysis of castor oil. The ratio of water to isopropyl ether and the ratio of weight ratio of lipase to castor oil were important for the hydrolysis of castor oil. At 30$^{\circ}C$ castor oil was completely hydrolyzed by 4 wt% of lipase in the mixture of isopropyl ether and water(1:1 in volume).

• Microbiology and Biotechnology Letters
• /
• v.19 no.1
• /
• pp.57-63
• /
• 1991

A strain J-19 was isolated from soil, produced lipase which has resistant against alkali and linear alkylbenzene sulfonate. The strain was identified as Pseudornonns sp.. The enzyme was purified by ammonium sulfate precipitation, DEAE-Sephadex and Sephadex G- 100 column chromatography. The specific activity of the purified enzyme was 35 unit/mg protein and the yield of enzyme activity was 17%. The purified enzyme showed a single band on polyacrylamide disc gel electrophoresis. Mo1ecul;tr weight of the purified enzyme was estimated about 36,000 by Sephadex GI00 gel filtration and SDS-polyacrylarnide gel electrophoresis. The optimum pH and temperature were pH 10.0 and $30^{\circ}C$, respectively. Activity of the purified enzyme was increased 2-fold by the addition of 0.1% linear alkylbenzene sulfonate and 2.5- fold by the addition of 0.05% Tide. This enzyme remained stable from pH 8.0 to 10.0 and stable up to $40^{\circ}C$.

• KSBB Journal
• /
• v.14 no.4
• /
• pp.511-516
• /
• 1999

The effects of environmental and compositon factors, such as reaction time, metal ions, pH, agitation speed, the weight ratio of water to oil, and the weight of enzyme, on the hydrolysis of oils by Lipase-OF were investigated. In case of oils with low melting point, the optimum temperature of hydrolysis were the enzyme activity was maximum was 37$^{\circ}C$. However, when the melting temperature was higher than 4$0^{\circ}C$, the optimum temperature was around the fusion temperature. The activity of Lipase-OF decreased very rapidly with increase of temperature in the range of higher than 45$^{\circ}C$ and the activity perished above $65^{\circ}C$. The effect of agitation speed was investigated from 150 to 650 rpm. The hydrolysis of oils increased as the agitation speed increased up to 350 rpm, but it did not increase any more above 350 rpm. The weight ratio of water to oil was changed from 1 : 9 to 9 : 1 for the investigation of the effect on the hydrolusis. The weight ratio for maximum hydrolysis was 1 : 1. $Ca^{2+}\;and\;Mg^{2+}$ among various metal ions had some effect on the stimulation of hydrolysis. The optimum concentration of the ions was about 100ppm at which the hydrolysis increased, compared with that of distilled water, by 2 to 3%. The Optimum pH of Lipase-OF was 7. The hydrolysis decreased as the pH decreased as the pH decreased and also decreased as the pH increased. The content of enzyme affected the hydrolysis of oil. The hydrolysis increased with the content of Lipase-OF in the range of less than 0.013 wt% of substrate. However, the increase of hydrolysis with the content of Lipase-OF ceased above 0.013 wt%. The experiments investigating the effect of environmental and composition factors on the hydrolysis of oils showed that the optimum temperature was 37$^{\circ}C$, the pH 7, the concentration of $Ca^{2+}\;or\;Mg^{2+}$ 100 ppm, the agitation speed 350 rpm, the weight ratio of water to oil 1 : 1, and the content of Lipase-OF 0.013 wt% of substrate.

• Korean Journal of Microbiology
• /
• v.40 no.4
• /
• pp.320-327
• /
• 2004

Three hundreds thirty two bacterial colonies which were able to degrade crude oil were isolated from soil sam­ples that were contaminated with oil in Daejeon area. Among them, one bacterial strain was selected for this study based on its higher oil degrading ability, and this selected bacterial strain was identified as Acinetobactor sp. B2 through physiological-biochemical tests and analysis of its 16S rRNA sequence. Acinetobactor sp. B2 was able to utilize various carbohydrates but did not utilize trehalose and mannitol as a sole carbon source. Acinetobactor sp. B2 showed a weak resistance to antibiotics such as kanamycin, streptomycin, tetracycline and spectinomycin, but showed a high resistance up to mg/ml unit to heavy metals such as Ba, Li, Mn, AI, Cr and Pb. The optimal growth temperature of Acinetobactor sp. B2 was $30^{\circ}C.$ The lipase produced by Acinetobactor sp. B2 was purified by ammonium sulfate precipitation, DEAE-Toyopearl 650M ion exchange chromatography and Sephadex gel filtration chromatography. Its molecular mass was about 60 kDa and condition for the optimal activity was observed at $40^{\circ}C$ and pH 10, respectively. The activation energy of lipase for the hydrolysis of p­nitrophenyl palmitate was 2.7 kcal/mol in the temperature range of 4 to $37^{\circ}C,$ and the enzyme was unstable at the temperature higher than $60^{\circ}C.$ The Michaelis constant $(K_m)\;and\;V_{max}$ for p-nitrophenyl palmitate were 21.8 uM and $270.3\;{\mu}M\;min^{-1}mg^{-1},$ respectively. This enzyme was strongly inhibited by 10 mM $Cd^{2+},\;Co^{2+},\;Fe^{2+},\;Hg^{2+},$ EDTA and 2-Mercaptoethalol.