• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2405-2412
• /
• 2000

A cast stainless steel may experience an embrittlement when it is exposed to approximately 30$0^{\circ}C$ for long period. In the present investigation, The three classes of the thermally aged CF8M specimie n are prepared using an artificially accelerated aging method. Namely, after the specimen are held for 300, 1800 and 3600hrs. at 43$0^{\circ}C$ respectively, the specimens are quenched in water to room temperature. Load versus load line displacement curves and J-R curves are obtained using the unloading compliance method. $J_{IC}$ values are obtained following ASTM E 813-87 and ASTM E 813-81 methods. In addition to these methods, JIC values are obtained using SZW(stretch zone width) method described in JSME S 001-1981. The results of the unloading compliance method are $J_Q$=485.7 kJ/m$^2$ for virgin material, $J_{IC}$ of the degraded materials associated with 300, 1800 and 3600hrs are obtained 369.25 kJ/m$^2$, 311.02 kJ/m$^2$, 276.7 kJ/m$^2$, respectively. The results of SZW method are similar to those of the unloading compliance method. Through the elastic-plastic fracture toughness test, it is found that the value of $J_{IC}$ is decreased with increasing of the aging time. The results obtained through the investigation can provide reference data for a leak before break(LBB) of reactor coolant system of nuclear power plants.

• Land and Housing Review
• /
• v.3 no.2
• /
• pp.169-175
• /
• 2012

In recent, there are many studies associated with energy piles to save initial construction cost for ground source heat pump system. In this study, to evaluate geothermal exchange rates two types (a connection type and a slinky type) of cast-in-place energy piles (PRD, 4.5m in depth, 1,200 mm in diameter) were constructed for the tests and their efficiencies were compared with numerical analysis results. As a result, starting with operation, geothermal exchange rate gradually decreases due to exchange of lower ground temperature. In the case of connection type, temperature difference is $0.37^{\circ}C$ in heating mode and $0.34^{\circ}C$, in cooling mode, respectively. In addition, in case of a connection type, geothermal exchange rate in heating mode is 2,314W/m and in cooling mode, 252.2W/m whose value is 9% higher than in heating mode. In the case of slinky type, the average geothermal exchange rate in heating mode is 168.0W/m, which is about 27% lower than that of connection type.

• Journal of Korea Water Resources Association
• /
• v.50 no.10
• /
• pp.661-671
• /
• 2017

The objective of this study was to analyze the flood stage considering the uncertainty caused by the river roughness coefficients and discharge. The methodology of this study involved the GLUE (Generalized Likelihood Uncertainty Estimation) to quantify the uncertainty bounds applying three different storm events. The uncertainty range of the roughness was 0.025~0.040. In case of discharge, the uncertainty stemmed from parameters in stage-discharge rating curve, if h represents stage for discharge Q, which can be written as $Q=A(h-B)^C$. Parameters in rating curve (A, B and C) were estimated by non-linear regression model and assumed by t distribution. The range of parameters in rating curve was 5.138~18.442 for A, -0.524~0.104 for B and 2.427~2.924 for C. By sampling 10,000 parameter sets, Monte Carlo simulations were performed. The simulated stage value was represented by 95% confidence interval. In storm event 1~3, the average bound was 0.39 m, 0.83 m and 0.96 m, respectively. The peak bound was 0.52 m, 1.36 m and 1.75 m, respectively. The recurrence year of each storm event applying the frequency analysis was 1-year, 10-year and 25-year, respectively.

• Journal of the Korean Statistical Society
• /
• v.35 no.4
• /
• pp.343-353
• /
• 2006

The two-way balanced one-level rotation design, $r_1^m-r_2^{m-1}$, and the three-way balanced multi-level rotation design, $r_1^m(\iota)-r_1^{m-1}$, were discussed (Park et al., 2001, 2003). Although these rotation designs enjoy balancing properties, they have a restriction of $r_2=c{\cdot}r_1$ (c should be a integer value) which interferes with applying these designs freely to various situations. To overcome this difficulty, we extend the $r_1^m(\iota)-r_1^{m-1}$ design to new one under the most general rotation system. The new multi-level rotation design also satisfies tree-way balancing which is done on interview time, rotation group and recall time. We present the rule and rotation algorithm which guarantee the three-way balancing. In particular, we specify the necessary condition for the extended three-way balanced multi-level rotation sampling design.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1993.05a
• /
• pp.64-69
• /
• 1993

The solar energy collection of a passive solar system depends on the finish of collecting surfaces. In this study, the test models of T.W system with different wall surface finishes were constructed, and the temperature distribution through the models was monitored. At the same time, a computer program based on F.D.M was developed in order to simulate various surface finishes. The difference of indoor temperature between the model with white color finish ($\alpha$=0.25) and the one with black color finish ($\alpha$=0.95) was about 1$0^{\circ}C$. For the wall with selective coating, the indoor temperature was 4-5$^{\circ}C$ higher than that of red brick wall, and 3-4$^{\circ}C$ higher than that of wall with black paint.

• Korean Journal of Clinical Laboratory Science
• /
• v.40 no.1
• /
• pp.18-25
• /
• 2008

In classical titrimetric analyses, the major concern is the concentration of titrant, usually the aqueous solution of hydrochloric acid or sodium hydroxide, that could be changed as time goes by and it is accompanied with the inaccuracy of the resulting data. And the statistical approach, the nonlinear regression analysis, which is a well-known statistical method, was introduced to determine the accurate concentration of the titrant and the exact value of parameters, $K_a$, r, $C_a$, $C_b$, for 0.01 M aqueous solutions of analytes, sodium pyruvate, sodium acetate, sodium bicarbonate, ammonium hydroxide, ammonium chloride and acetic acid at $25^{\circ}C$. We used Gauss-Newton method for the linearlization of the nonlinear titration system and the two-parameter fitting showed appreciable convergent data for the parameters of the analytes set with the various range of $K_a$ value.

• Annual Conference of KIPS
• /
• 2007.11a
• /
• pp.779-781
• /
• 2007

Nowadays, as the increasing functionality and scales of embedded systems, system design grows more complex than before. So verification and simulation of systems become an important facet in hardware-software co-design issues. But it is almost impossible to simulate an embedded system without real hardware implementation or environment communication, especially for control-dominated reactive systems. Therefore, in this paper, we will introduce a GUI environment module generator for integrated Esterel\C++ simulation. By generating the GUI modeling environment, we can simulate and verify the whole embedded system conveniently.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.2
• /
• pp.1-6
• /
• 2000

X-ray lithography mask with SiC membrane and Ta absorber patterns has been fabricated using ECR plasma CVD, d.c. magnetron sputtering, and ECR plasma etching. The stress of stoichiometric SiC film was adjusted by rapid thermal annealing under $N_2$, ambient. Adjusting the working pressure during sputtering process resulted in a near-zero residual stress, reasonable density, and smooth surface morphology of Ta film. Cl-based plasma showed a good etching characteristics of Ta, and two-step etching process was implemented to suppress microloading effect fur sub-quarter $\mu\textrm{m}$ patterning.

• Journal of architectural history
• /
• v.1 no.1 s.1
• /
• pp.49-67
• /
• 1992

This study is an architectural investigation paper which has been investigated for 5 years from 1986 about commoner's traditional houses and village in southwestern island area of Korea. Man has lived in this area form the prehistoric age. But from 13C to 14C and in 16C most of people had left this islands by external invasion (Japan) and from 17C many people have lived in real earnest. This area did not have cultural interchange easily than inland area because of geographical conditions, Therefore, so far, many traditional factors have been handed down and especially, a good many commoner's traditional houses exist. The time of builging of these houses is mainly 19C and building shape of those days remains nearly as it is. About 450 houses have been investigated for 5 years. The composition of the houses is composed of Anchae (a centeral house), Sarangchae (an attached house of anchae) and Chukganchae (It has rest room and stores barnyard manure). Somtimes, Sarangchae was ommitted according to the circumstance of the house. Generally, the form of arrangement of house is divided into two shapes; One is 'ㅡ'shape which has only Anchae and the other is 'ㄱ' shape which has Anchae and Sarangchae. In the scale of the house, Anchae averages $41m^2$ and Sarangchae averages $27m^2$.

• Journal of the Korean Ceramic Society
• /
• v.37 no.4
• /
• pp.314-319
• /
• 2000

Microstructueral development and electrical properties in ZnO-Bi2O3-ZnAl2O4 system were investigated with ZnAl2O4 content(0.1~1.0 mol%). The shrinakge of specimens started around $700^{\circ}C$ and finished at 110$0^{\circ}C$, reaching a maximum shrinkage rate at 80$0^{\circ}C$. The shrinkage rate is strongly related to the fromation of a Bi-rich liquid. The increase of the ZnAl2O4 content inhibited the grain growth of ZnO. Most of ZnAl2O4 particles located at the grain boundaries were about 2~3${\mu}{\textrm}{m}$. ZnO grain size changed little up to 110$0^{\circ}C$, but increased markedly above 115$0^{\circ}C$, especially at lower ZnAl2O4 content. Drastic decreasing in breakdown voltage(Vb) with increasing temperature is expected to be dependent on the ZnO grain size and the distribution of the largest grains between the electrode. The nonlinear I-V characteristic was significantly influenced by the ZnAl2O4 content, which exhibited a maximum value at about 15${\mu}{\textrm}{m}$ of ZnO grain size.