• Korean Journal of Digital Imaging in Medicine
• /
• v.9 no.1
• /
• pp.37-43
• /
• 2007

1. Purpose : This study is to present effective exposure conditions to acquire the best image of simple abdomen in Film Screen (F.S) system and Computed Radiography (C.R) system. 2. Method : In the F.S system, while an exposure condition was fixed as 70kVp, images of a patients simple abdomen were taken under the different mAs exposure conditions. Among these images, the best one was chosen by radiologists and radiological technologists. In the C.R system, the best image of the same patient was acquired with the same method from the F.S system. Both characteristic curves from F.S system and C.R system were analyzed. 3. Results : In the F.S system, the best exposure condition of simple abdomen was 70kVp and 20mAs. In the CR system, with the fixed condition at 70kVp, the image densities of human organs, such as liver, kidney, spleen, psoas muscle, lumbar spine body and iliac crest, were almost same despite different environments (3.2mAs, 8mAs, 12mAs, 16mAs and 20mAs). However, when the exposure conditions were over or under (below) 12mAs, the images between the abdominal wall and the directly exposed part became blurred because the gap of density was decreased. In the C.R system, while the volume of mAs was decreased, an artifact of quantum mottle was increased. 4. Conclusion : This study shows that the exposure condition in the C.R system can be reduced 40% than in the F.S system. This paper concluded that when the exposure conditions are set in CR environment, after the analysis of equipment character, such as image processing system(EDR : Exposure Data Recognition processing), PACS and so on, the high quality of image with maximum information can be acquired with a minimum exposure dose.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.4
• /
• pp.67-74
• /
• 2010

Currently domestic rural communities are coping with the modernization of farming and agricultural competitiveness. Nevertheless, year after year many agricultural facilities have accidents due to the collapse or damage of facilities due to natural disasters or technical problems. This research is the development of a P-C-M prototype support system to solve the problems related to collapse or damage accidents at agricultural facilities. The P-C-M support system is a process encompassing procurement, construction and maintenance. In this research, a P-C-M support system process module design is performed, a P-C-M support system algorithm is developed, and a P-C-M support prototype system is developed. In conclusion, the developed P-C-M support system is expected to contribute to information-sharing on agricultural facilities, and communication between the user and suppliers.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.127-130
• /
• 2009

Recently agricultural productivity innovation projects are increasing all over the farming countries. To reform and improve the productivity of agricultural industry is important factors. This research is to do the functional Analysis for P-C-M support System Design in Agricultural Facilities. By analyzing the for P-C-M support System modules in the agricultural construction process, P-C-M support System factors are derived and defined. The result of this study would widely be used as a fundamental research guide to develop the agricultural P-C-M support System in the agricultural construction process.

• Journal of the Korean Mathematical Society
• /
• v.36 no.1
• /
• pp.97-107
• /
• 1999

Given a C-dynamical system (A, G, $\alpha$) with a locally compact group G, two kinds of C-algebras are made from it, called the full C-crossed product and the reduced C-crossed product. In this paper, we extend the theory of the classical C-crossed product to the C-dynamical system (A, G, $\alpha$) with a left-cancellative semigroup M with unit. We construct a new C-algebra A $\alpha$rM, the reduced crossed product of A by the semigroup M under the action $\alpha$ and investigate some properties of A $\alpha$rM.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.135-136
• /
• 2011

This study is developing the Web-based P-C-M support system in agricultural facilities to help the users actually utilizing the system. This system can help the people accept the information and sharing the communication. P-C-M support system is the process in procurement, construction and maintenance. In conclusion, P-C-M support system is expected to the contributed to the agricultural facilities information sharing and communication between the user and suppliers.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.1
• /
• pp.127-140
• /
• 2009

COMS DATS C&M software is an integrated management system providing control and monitoring functionalities for COMS IDACS (Image Data Acquisition and Control System). DATS C&M S/W consists of a system management module, a control and monitoring module, a data management module, and a trend analysis module. COMS SOC is supposed to operate IDACS as a backup of MSC. Especially, for the backup operation, the control and monitoring module of DATS C&M S/W is designed to support the synchronization of the two IDACS systems. This paper describes design, implementation, and result of development of DATS C&M S/W.

• Research in Mathematical Education
• /
• v.14 no.1
• /
• pp.19-31
• /
• 2010

Introduced in this paper is one of the most remarkable Ottoman institutions, the Ottoman Palace School-Enderun, with a focus on the life story of Matrak$\c{c}{\i}$ Nasuh, one of its most noted graduates and teachers. Matrak$\c{c}{\i}$ Nasuh's life and work as a prominent mathematician and a teacher of mathematics are investigated as a case study. It shows how young boys and girls were selected because of their academic potential, brought to Istanbul, and educated in Enderun to serve the Empire. This research articulates the mathematics education on the first institutionalized gifted education system of the world and discusses its implications for today.

• Journal of Power System Engineering
• /
• v.6 no.1
• /
• pp.88-95
• /
• 2002

본 연구에서는 균열 치유 거동을 가지는 소결된 Mullite/SiC의 모재, 열처리재, 균열재, 치유 균열재의 기계적 특성이 논의되었다. 반타원형 균열의 치수는 $100{\mu}m$ 과 $200{\mu}m$이다. 얻어진 결과는 다음과 같다. (a) Mullite/SiC 복합 세라믹스는 균열 치유 능력이 있었다. (b) 최적의 균열 치유 열처리 조건은 $1300^{\circ}C$, 1시간이었다. (c) 치유 가능한 최대 균열 길이는 직경 $100{\mu}m$의 반타원 균열이다. (d) 균열 치유부는 $1200^{\circ}C$이상에서 충분한 강도를 가졌고, 대부분의 시험편은 균열 치유부 이외의 영역에서 파단 하였다. (e) 공기중에서 예열처리는 본 재료의 피로강도 향상에 유용하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2693-2701
• /
• 2010

Coastal Zone is a integrated space including both coastal waters and inland. C.Z.M is a strategic practice system which can integrate and coordinate the coastal zone for preserving and making use of coastal resources. Through foreign and domestic C.Z.M Cases, this study analyzes the operating mechanism in the three aspects: role sharing among the administrative agencies, mediation and cooperation among the interested parties, and inducements of voluntary participation. And it achieves the common characteristics of C.Z.M: building the assessment system for establishing desirable policy directions, the stable support system for sustainable coastal management, the mediation system for cooperation of stakeholder, and the education system for reinforcing the management ability and inducing the voluntary participation. Finally it suggests the implications to build the coastal zone management system properly on the basis of common values in this mechanism.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.1
• /
• pp.142-146
• /
• 1993

The vibrations of the main spindle of the M/C tools are most important in the consideration of the dymamic performance of the M/C tools. In order to resolve and predict the dynamic behaviour of the main syindle it is necessary to have the mathematical model of the system. The system identification is the procedure to provide us with the mathematical model of the procedure of the system identification of the main spindle of the M/C tools to predict the dynamic behaviour of the machine and further to have the basis for the design of M/C tools.