• Rapid Communication in Photoscience
• /
• 제1권1호
• /
• pp.19-20
• /
• 2012

Novel star-shaped imide compounds containing electron-donating triphenylamine and/or electron-withdrawing bis(trifluoromethyl)phenyl side groups were synthesized via a two-step process. First, 3,6-dibromo-benzene-1,2,4,5-tetracarboxylic acid (2B4BA) was reacted with 4-aminophenyl (diphenylamine) (ATPA) or 3,5-bis(trifluoromethyl)aniline (6FA) by imide reaction. Then, Suzuki coupling reaction was carried out on these compounds with 4-(N,N-diphenylamino)-1-phenyl boronic acid (BTPA) or 3,5-bis(trifluoromethyl)phenyl boronic acid (6FBB), resulting in 3,6-bis[4-(diphenylamino)phenyl]-N,N'-bis[4-(diphenylamino) phenyl]-pyromellitimide (TPTPPI), 3,6-bis[3,5-bis(trifluoro methyl) phenyl]-N,N'-bis[3,5-bis(trifluoromethyl) phenyl]-pyro mellitimide (6F6FPI) or 3,6-bis[4-(diphenylamino)phenyl]-N,N'-bis[3,5-bistrifluoromethyl)phenyl]-pyromellitimide (6FTPPI). The imide compounds obtained were characterized by NMR, FT-IR, DSC, TGA, melting point analyzer, EA, and solubility measurements. In addition, their optical and electrical properties were evaluated by fluorescence spectroscopy, UV-vis spectroscopy, and cyclic voltammetry (CV). 6F6FPI exhibited deep blue emission (443 nm), along with high $T_m$ ($382^{\circ}C$) and relatively high $T_g$ ($148^{\circ}C$).

• 신재생에너지
• /
• 제2권4호
• /
• pp.70-77
• /
• 2006

The butane decomposition over the catalyst is an attractive method for the hydrogen production. The objective of the work was investigated the catalysis of carbon black in butane decomposition reaction. The Butane decomposition was performed over carbon black catalyst in a range of $500-1100^{\circ}C$. The butane conversion of thermal decomposition and catalytic decomposition were increased with increasing the reaction temperature The butane conversion of the thermal decomposition was higher than the butane conversion of the catalytic decomposition. Hydrogen and methane were mostly observed in the butane decomposition over $1000^{\circ}C$. Especially, the hydrogen yield was steadily increased with raising the reaction temperature, It could be known that the hydrogen yield of the catalytic decomposition was higher than one of the thermal cracking because the hydrogen productivity was improved by the catalyst. The deactivation of the catalyst was not observed in the reactivity test. The surface and crystalline of the fresh and used catalysts were characterized by TEM, BET surface area and XRD analysis, respectively. The fresh carbon black particles had mostly smoothly round-shaped surfaces. In the surface of the carbon black after the reaction, the deposited carbon was formed as the protrusion-shaped carbon and the cone-shaped. The proper peaks of carbon black appeared in XRD analysis.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권6호
• /
• pp.440-446
• /
• 2004

Interest in in vitro study of entomopathogenic fungi, including Cordyceps species, has been increasing due to their valuable bioactive compounds and biocontrol effects. Among Cordyceps species, in vitro stromata of C militaris has been successfully produced and cultivated for industrial purposes. However, genetic study on in vitro stromata formation of C militaris has not been carried out yet. Here, relationship between mating system and perithecial stromata formation of C militaris is reported. Mating system was determined by observing perithecial stromata formation from mono-ascospore cultures and their pair-wise combinations. Certain combinations of mono-ascospore strains produced perithecial club-shaped stromata, whereas other combinations produced either no stromata or only abnormal non-perithecial stromata. Similarly, mono­ascospore cultures without combination produced either no stromata or only abnormal non­perithecial stromata. Despite obvious heterothallism, self-fertility was occasionally observed in few strains of C militaris. These observations indicated that C militaris behaves as a bipolar het­erothallic fungus and requires two mating compatible strains in order to produce regular club­shaped perithecial stromata, a fundamental requirement for its industrial cultivation.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권4호
• /
• pp.4-9
• /
• 2005

The degradation behavior of the critical current $(I_c)$ of Bi-2223 superconducting tapes under pressurized liquid nitrogen were investigated using a newly developed p-shaped sample holder which gives a series of bending strains to a sample. Three kinds of commercially available multi-filamentary Bi-2223 superconducting tapes were used. At atmospheric pressure, the Ie degradation behavior depended on the manufacturing process undergone by each tape. The tapes externally reinforced or densified by over pressure showed better bending strain tolerance than the Ag alloy-sheathed Bi-2223 tape. But these tapes showed a significant $I_c$ degradation when pressurized to 1 MPa in liquid nitrogen. For all samples, after depressurization to atmospheric pressure from 1 MPa, the Ie was completely recovered to its initial values at atmospheric pressure. When the samples were subjected to a thermal cycle wherein the tape was warmed up to room temperature after being depressurized from 1 MPa, it was found that the larger degradation of $I_c$ occurred at the regions where significant ballooning occurred, such as $0\%\;and\;0.2\%$. However, an improved ballooning damage tolerance was observed in the highly-densified tape.

• 조명전기설비학회논문지
• /
• 제26권4호
• /
• pp.82-87
• /
• 2012

In this paper, flashover characteristics of air in the vertical arrangement of cylinder-shaped rod and plane gap in the case of combustion flame on the plane electrode were examined under the application of a.c. and d.c. high-voltages. In order to investigate the effect of propane flame on the flashover characteristics of air, flashover voltages in accordance with the variation of the gap length and the horizontal distance between the flame and the high-voltage rod electrode were measured. As the result of the experiment, flashover voltages in the presence of the flame were substantially lowered than those in the absence of flame, and the polarity effects with the d.c. voltages on appeared owing to the flame. Flashover voltages of air were increased in the proportion of the gap length and the horizontal distance in the case of both a.c. and d.c. voltages, but the flame was extinguished by such corona wind that was produced from the rod electrode when the gap length and the horizontal distance reached to a certain degree.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.630-635
• /
• 2009

For use as a photocatalyst, bismuth tungsten oxide, $Bi_2WO_6$, was successfully synthesized by hydrothermal treatment at pH = 11 and heating at 200 ${^{\circ}C}$ for 24h, and samples were subsequently thermal treated at 400, 600, and 800 ${^{\circ}C}$ to increase crystallinity. TEM results revealed that the initial untreated particles were sheet‐shaped, grain size was below 80 nm, and it increased with treated temperatures. These $Bi_2WO_6$ samples absorbed at around 400 nm in the visible light range and the intensity of absorption was particularly strongest in samples thermal treated at 600 ${^{\circ}C}$. Their photoluminescence abilities, related to the recombination between the excited electrons and holes, were overall small for other general photocatalysts such as TiO2, and the smallest in the case of thermal treatment at 600 ${^{\circ}C}$, as reversible result of UV‐visible absorbance. Methyl orange of 5.0 ppm aqueous solution was almost completely removed after 2 h when treated over the $Bi_2WO_6$ thermal treated at 600 ${^{\circ}C}$.

• 한국세라믹학회지
• /
• 제41권2호
• /
• pp.118-124
• /
• 2004

탄소환원질화법에 의해 합성된 질화알루미늄의 물성은 출발물질의 종류, 액상$.$기상 반응물질의 양, 분위기 그리고 합성온도에 따라서 많은 차이를 나타내었다 질화알루미늄 합성을 위하여 Al원으로는 $\alpha$-A1$_2$O$_3$를 사용하였고 환원제로는 카본 블랙을 사용하였으며, 기상반응을 유도하기 위하여 AlF$_3$를 사용하여 고순도 질소분위기에서 실험을 행하였다. 또한 액상반응 시 미세구조상의 변화를 확인하기 위하여 금속 알루미늄을 첨가하여 실험을 행하였다. 질화알루미늄이 생성과 침상형 휘스커상의 형상은 1$600^{\circ}C$의 온도에서 가장 잘 나타났으며 열처리 온도의 상승은 오히려 휘스커상의 형성을 방해하고 있음을 보여주었다. 침상형 휘스커의 합성에 가장 큰 영향을 주는 것은 기상반응을 일으키는 AlF$_3$ 첨가이며, AlF$_3$의 첨가량이 증가함에 따라 침상형 휘스커상을 확인하였다. 액상반응을 위한 금속 알루미늄 첨가는 전체의 15wt%까지는 침상형 휘스커가 증가하고 있음을 나타내었으나 l5wt% 이상으로 첨가하는 경우 오히려 휘스커가 감소하는 것으로 나타났다.

• 한국세라믹학회지
• /
• 제45권11호
• /
• pp.734-738
• /
• 2008

Ettringite$(3CaO{\cdot}Al_2O_3{\cdot}3CaSO_4{\cdot}32H_2O)$, one of the hydrated phase of Portland cement is usually formed in the early stage of hydration by the reaction of tricalciumaluminate$(C_3A)$ and gypsum. The rapid and strong crystal growth of separated rod-shaped ettringite have been utilized for the preparation of special cements of rapid setting, high strength and non-shrinking properties. The ettringite also has been noticed as a promising materials for the immobilization of various waste ions because of its unique crystal structure which has abundant channels and exchangeable ionic compounds. In this study, the formation and growth behavior of the ettringite was investigated in the system $C_3A-CaSO_4-H_2O$ using $C_3A$ clinker and gypsum to obtain a microporous body for waste ion immobilization. Ettringite was revealed to form by the dissolution-precipitation mechanism and the bulk body was by the entangled growth of rod-shaped ettringite crystals. The hardened body was composed of nearly pure rod-shaped ettringite interlocked each other with adequate mechanical strength. The homogeneity of structure, pore size, specific surface area and porosity of the hardened body were influenced by reaction temperature, water/powder ratio and the curing time. The hardened body prepared with water/powder ratio of 1 at $24^{\circ}C$ for one day showed excellent morphological properties for the purposed materials.

• 한국세라믹학회지
• /
• 제26권5호
• /
• pp.625-630
• /
• 1989

Aluminium silicate gels were prepared by gel-technique using Al(OH)3 and TEOS as starting materials. Aluminium silicate gel as formed mullite at 120$0^{\circ}C$. From this method, homogeneous mullite was formed available needle-like shaped and close compacted. As excess SiO2 mullite composition, the needle-like shaped crystal, size according to increased with SiO2, was increased from 3${\mu}{\textrm}{m}$ to 7${\mu}{\textrm}{m}$ but liquid phase did not affect the formation of needle-like shaped mullite. As excess Al2O3 mullite composition, the needle-shape mullite crystal could not be detected because Al2O3 acted as chunky behavior.

• 태양에너지
• /
• 제17권1호
• /
• pp.93-102
• /
• 1997

The numerical study on the natural convection inside the L-shaped enclosure having a protrusion of which left wall is maintained at $T_c$. Right wall and part of the bottom and 2nd floor are at $T_h$ has been performed numerically for aspect ratio A=1, geometrically different cases and for $Ra=5{\times}10^5{\sim}2{\times}10^6$. As the L-shaped of the enclosure goes thicker horizontally and the smaller 2nd floor's length, the mean Nusselt number at the left cold wall becomes smaller for same Ra, and there is little influence of the increase of Ra on mean Nusselt number.