• Journal of Sericultural and Entomological Science
• /
• v.27 no.2
• /
• pp.54-63
• /
• 1985

This studies has been carried out how to effect on electrostafic propensity of synthetic fabrics by coating with 0.5% acrylic polymer solution which was previously developed by the author to improve anticrease nature of silk. The work conditions are: (A) Applied synthetic polymer was acrylic polymer 525, developed by the author. (B) Electrostatic voltage for various fabrics were carried out by Korea standard abrasion partner with Korea standard (KS K 0905) cotton, nylon, polyester and the self sample fabric. (C) Applied fabrics for the investigations were carried out by using abrasion partner with Korea standard (KS K 0905) cotton, nylon, polyester and the self sample fabric. (D) Electrostatic propensity investigations were carried out by use of sample as silk, nylon, polyester and acrylic fabrics, seperating before finish or after finish. (E) Washing after the finish or the original fabric was carried out by Korea standard method, KS K 0465. Through the investigations, he happened to find many interesting matters and the obtained results are as followings. 1. Electrostatic voltage for the finished fabrics increased more than their original silk, nylon, acrylic fabrics except polyester fabric. (See Table 5) 2. Electrostatic voltage for the finished polyester against K.S. polyester decreased remarkably than the original fabric test. 3. In spite of no problem on electrostatic propensity of silk, it showed high electrostatic voltage between the same nature fabric abrasion, because silk is very weak against abrasion and because the test method had been developed to be useful for only synthetic fabrics. 4. Electrostatic voltage increased more in case of abrasion between different nature of fabrics than the same nature of fabrics. 5. Electrostatic voltage of each fabric increased by repeat of wash. 6. Many investigation data were followed with Contact Electrification Series Principle, another word, the farther each other located fabric on the series abrasion was, the higher electrostatic voltage. (See Fig. 6) 7. Such investigation gives warning of use on the mix fiber spinning service as far as concern with electrification. 8. It may also call attention for such increase of electrification in case any finishing of silk textile.

• Restorative Dentistry and Endodontics
• /
• v.33 no.4
• /
• pp.389-396
• /
• 2008

The purpose of this study was to evaluate the color stability of resin cements with accelerated test. Four dual curing resin cements: Panavia-F (KURARAY). Duolink (BISCO), Variolink-II (Ivoclar Vivadent), and RelyX Unicem (3M ESPE) and 1 self curing resin cement: Resiment CE (j. l. Blosser) were used in this study. In control group, Gradia Anterior (GC) composite resin and Tescera Dentin (Bisco) indirect composite were used. Ten disk shape specimens were made from each resin cement. The specimens were subjected to an accelerated aging process in a refrigerated bath circulator at 60$^{\circ}C$ for 15 and 30 days. Spectrophotometric analyses were made before and after 15 days and 30 days of accelerated aging time. The color characteristics ($L^*,\;a^*,\;b^*$) and the color difference (${\Delta}E^*$) of the specimens before and after immersion were measured and computed. Regardless of type of the resin cements, $L^*$ value was decreased and $a^*$ value was increased, but there were no significant difference. But $b^*$ value was increased significantly (p < 0.05). Tescera inlay showed least color change (p < 0.05), but Gradia showed notable color change after 15 days. After 30 days on accelerated aging, ${\Delta}E^*$ value was increased (Panavia-F < Variolink-II < Resiment CE < Duolink < Unicem) (p < 0.05). but there were no significant difference among Panavia-F, Variolink-II, and Resiment CE groups. After 30 days of accelerated aging, ${\Delta}E^*$ value of all resin cements were greater than 3.0 and could be perceived by the human eye.

• Journal of Nutrition and Health
• /
• v.54 no.1
• /
• pp.10-22
• /
• 2021

Purpose: Key Foods refers to foods that have a high contribution in the nutrient intake of individuals, and exert important effects on their health. This study was undertaken to identify Korean Key Foods, using data from the 7th Korea National Health and Nutrition Examination Survey (KNHNES). Methods: The data source for the extraction of Key Foods was the 24-hour dietary survey data obtained from the 7th KNHNES (2016-2018), and 21,271 subjects were evaluated. A total of 17 nutrients were selected as the key nutrients for identifying the Key Foods, including energy, carbohydrates, protein, lipid, dietary fiber, calcium, phosphorus, iron, sodium, potassium, vitamin A, thiamin, riboflavin, niacin, vitamin C, cholesterol, and sugars. The nutrient consumption approach was applied to generate a list of potential Key Foods. Foods included in 85% of the cumulative intake contribution from one or more key nutrients, were subsequently selected as Key Foods. Results: Of the 1,728 foods consumed by survey respondents, we extracted 728 Key Foods. These Key Foods explained 94% key nutrient intakes of the subjects. Based on the contribution rate to key nutrient intake, the top 10 Key Foods identified were multigrain rice (5.32%), plain white rice (4.23%), milk (3.3%), cabbage kimchi (2.82%), grilled pork belly (1.56%), apples (1.52%), fried eggs (1.49%), cereal (1.36%), instant coffee mix (1.21%), and sweet potatoes (1.12%). These 10 foods accounted for 23.93% total key nutrient intake of the survey respondents. Conclusion: Seven hundred and twenty-eight foods were extracted and identified as the 2020 Korean Key Foods. These Key Foods can be considered the priority foods to be analyzed for establishing a national nutrient database.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.207-212
• /
• 2012

The objective of the present study is to identify the physico-chemical characteristics of used plug media (UPM) and its effect on growth response of tomato and cucumber seedlings. The UPM from commercial media Mix#5 (Sungro co., Ltd.) was used in this study. This media was sterilized by sterilizer at $120^{\circ}C$ in 30 minutes at 1.5 atm. Physicochemical properties of UPM was compared with new plug media (NPM). Physical properties such as air volume, particle density, solid volume, bulk density were investigated by three phase device (DIK-1130, Japan). And chemical characteristics such as $NO_3$-N, $P_2O_5$, K, Mg, Ca, $SiO_2$, CEC, OM were investigated by soil spectrophotometer (PTIZEN 1412SA, Mecasys Co., Ltd). The result indicates that air volume and water holding capacity of UPM are lower than NPM (25%, 15%, respectively). Bulk density and soil weight are more than two times higher than NPM per unit volume. Compared to NPM, there were no significant different for pH and EC. But CEC of UPM is lower than NPM 40%. In order to compare growth response and ability absorption of inorganic elements by plants, cucumber and tomato seedlings were used and chemical characteristics after growing of mediums were determined. The result indicated that seeding quality of tomato and cucumber in UPM is less than in NPM and almost inorganic ions of UPM are lower than NPM. So it is necessary to improve physicochemical properties of UPM.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.37 no.4
• /
• pp.1-10
• /
• 2019

The purpose of this study is to examine the design ＆ construction methods of the traditional landscape space of the past and the repair and maintenance of cultural heritages to maintain it today. To this end, the method of narrative description, process extraction and construction related to traditional landscaping were compared to each other based on the 『Imwongyeongjeji』 「Seomyongji」 and 'Standard Specification for Repairing Cultural Heritages'. The results are as follows; First, to analyze at the description methods of the 『Imwongyeongjeji』 「Seomyongji」 and 'Standard Specification for Repairing Cultural Heritages' and related processes in the field of traditional landscaping. 『Imwongyeongjeji』 「Seomyongji」 was an encyclopedia of the overall construction method of the living space, describing the location, effect, and advantages and disadvantages of each component and presenting quantitative figures to institutionalize the construction of traditional landscaping spaces. 'Standard Specification for Repairing Cultural Heritages' presented the entire process of repairing cultural heritages, and it is becoming a kind of guide for reference at the site. Among them, foundation construction, roof construction, landscape construction, and fence construction were drawn as items that could be applied to traditional landscaping areas. Second, the traditional landscape space construction method was divided into the processes of foundation construction, roof construction, landscaping construction, and fence construction. Foundation construction is a way of repeating the process of land-tramping. During the construction of the roof, the tile-roofed building was built on top of the rafters and roofed with tiles. And thatched roof was made to a number of rice straws bundles to cover the roof one after the other. Instead of tiles, the stone roof was made of thin and wide stones, and the wooden boards were used for the single roof and the bark roof were constructed with many layers of dried corrugations. Landscape construction mainly consists of the Paving technique through tramping rubble and the construction of terraced flower by planting stone, plants, and shrubs on the top. According to the building materials, the wall construction was derived from the earth-stacked earthen wall, stone walls using stone and clay, marble walls made of tile patterns, and the construction of a board wall using a wood board as a wall. Third, comparing the construction methods of the 『Imwongyeongjeji』 「Seomyongji」 and 'Standard Specification for Repairing Cultural Heritages', 『Imwongyeongjeji』 「Seomyongji」 focuses on standardizing the construction methods to create a new traditional space. There is a difference in the setting of the scope of the 『Imwongyeongjeji』 「Seomyongji」 and the construction because 'Standard Specification for Repairing Cultural Heritages' provides the overall construction procedure considering the diversity of the cultural heritages. In addition, the traditional landscape space used to be a residential space in the past, but today, the maintenance process of the already established facilities as designated cultural heritages has been carried out, and construction methods have been added to create viewing conditions. In terms of the succession of traditional knowledge, some similar methods were found in the repair of cultural assets today, and some cases were also confirmed in the reconstruction of traditional technologies such as application of some materials or mix, separation of added facilities and introduction of efficient construction methods.

• Korean Journal of Environmental Biology
• /
• v.18 no.2
• /
• pp.279-290
• /
• 2000

To alleviate the harmful effects from contamination, the Sihwa Lake waters have been regularly fluxed out into the ocean to mix and circulate with the oceanic waters, and then allowed to flow back into the lake. In the present study, eco-environmental impacts by the outflowing contaminated lake waters to the benthic communities of the coastal zones along Kyonggi Bay were examined at three separate areas. A total of 22 groups of meiobenthic animals were commonly found in the subtidal zones of the Bay. All groups of the meiobenthic animals on the 1st and 7th days after the outflow were remarkably reduced in numbers from the selected areas examined, as compared to those observed one day before the outflow. It was also found that the community structure of meiobenthos was changed drastically: At the station near the water gate, for example, where the immediate outflow of the lake water was encountered, the benthic harpacticoids, the group observed to be one of the predominant groups before the outflow, were found to have disappeared completely. For an area that was relatively far away from the water gate, the reduction rate of meiobenthos after the outflow events was slower and more gradual than the nearer sites. An area that is the farthest from the water gate, no reduction in any of the meiobenthos group was observed. The ratio between nematodes/copepods (N/C) was remarkably changed by the outflows at the station near the water gate: One day before the outflow, the ratio was 0.7 while the ratio was 19.0 at the station near the water gate. In contrast, at the stations relatively far from the water gate, the ratio decreased one day after the outflow event, but increasing trends were observed one week later. In the tidal flats, Station 1 exhibited the common observed regional values of the ratio whereas Station 2 showed a very high ratio of 191.3. The results suggested that the contaminated lake water outflows directly effect meiobenthos in a relatively short time period and thus the meiobenthos may be a good indicator animal group for examining the effect of pollution. [Lake Sihwa, contaminat water outflow, meiobenthic animals living]

• Journal of Global Scholars of Marketing Science
• /
• v.19 no.2
• /
• pp.5-16
• /
• 2009

Against the backdrop of the increasing trend towards economic globalisation, many international firms are indicating that decisions on how to enter foreign markets remains one of the key strategic challenges confronting them. Despite the rich body of literature on the topic, the fact that these challenges have continued to dominate global marketing strategy discourses point to someevident lacunae. Accordingly, this paper considers the variables, categorised in terms of firm contexts (standardisation, market research, competition, structure, competitive advantage) and host country-contexts (economic development, cultural differences, regulation and political risk), which influence the degree of involvement of UK companies in overseas markets. Following hypotheses were drawn from literature review: H1: The greater the level of competition, the higher the degree of involvement in the overseas market. H2: The more centralised the firm's organisation structure, the higher the degree of involvement in the overseas market. H3a: The adoption of a low cost-approach to competitive advantage will lead to a higher degree of involvement. H3b: The adoption of an innovation-approach to competitive advantage will lead to a higher degree of involvement. H3c: The adoption of a market research approach to competitive advantages will lead to a higher degree of involvement. H3d: The adoption of a breadth of strategic target-approach to competitive advantage will lead to a lower degree of involvement. H4: The higher the degree of standardisation of the international marketing mix the higher the degree of involvement. H5: The greater the degree of economic development in the host market, the higher the degree of involvement. H6: The greater the cultural differences between home and host countries, the lower the degree of involvement. H7: The greater the difference in regulations between the home country and the host country, the lower the degree of involvement. H8: The higher the political risk in the host country, the lower the degree of involvement. A questionnaire instrument was constructed using, wherever possible, validated measures of the concepts to serve the aims of this study. Following two sets of mailings, 112 usable completed questionnaires were returned. Correlation analysis and multiple regression analysis were used to analyze data. Statistically, the paper suggests that factors relating to the level of competition, competitive advantages and economic development are strong in influencing foreign market involvements. On the other hand, unexpectedly, cultural factors (especially individualism/collectivism and low and high power distance dimensions) proved to have weak moderating effects. The reason for this, in part, is due to the pervading forces of globalisation and the attendant effect on global marketing. This paper has contributed to the general literature in a way that point to two mainimplications. First, with respect to research on national systems, the study may hold out some important lessons especially for developing nations. Most of these nations are known to be actively seeking to understand what it takes to attract foreign direct investment, expand domestic market and move their economies from the margin to the mainstream global economy. Second, it should be realised that competitive conditions remain in constant flux (even in mature industries and mature economies). This implies that a range of home country factors may be as important as host country factors in explaining firms' strategic moves and the degree of foreign market involvement. Further research can consider the impact of the home country environment on foreign market involvement decisions. Such an investigation will potentially provide further perspectives not only on the influence of national origin but also how home country effects are confounded with industry effects.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.3
• /
• pp.1-7
• /
• 2018

As part of a research dedicated to the field evaluation of the durability of concrete subjected to freezing-thawing, this study analyzes the relationship between the surface roughness and the relative dynamic elastic modulus through image analysis. Four mix compositions with water-to-binder ratios (W/B) of 40%, 50%, 60% and 70% and without AE agent were considered to provoke early freezing. The basic physical properties of the mixes including the relative dynamic elastic modulus and the compressive strength were first evaluated experimentally according to W/B. Then, tests were performed to measure the surface roughness followed by photographs and SEM image analysis. The measured surface roughness tended to increase with larger number of freezing-thawing cycles regardless of W/B. The relative dynamic elastic modulus appeared to increase gradually with the number of cycles for the relatively denser mixes with W/B of 40% and 50%. Besides, the surface roughness increased only at rupture for the mixes with W/B of 60% and 70%. Moreover, the analysis of the photographs of the surface of the mixes with W/B of 40% and 50% revealed that the degradation progressed gradually from the surface with the freezing-thawing cycles. However, for the mixes with W/B of 60% and 70%, apparent change of the surface remained very insignificant until rupture at which damage like cracking could be observed. Consequently, the analysis of surface photograph or the measurement of the surface roughness presented some limitation in assessing the degree of freezing-thawing-induced degradation in case of relatively porous specimens. On the other hand, the photograph and surface roughness appeared to be sufficient for assessing such degradation for the mixes with W/B of 40% and 50%. Accordingly, the image of the surface and the surface roughness are potentially applicable on site for the assessment of freezing-thawing damages in relatively dense mixes.

• Journal of Dairy Science and Biotechnology
• /
• v.30 no.1
• /
• pp.23-30
• /
• 2012

This study was carried out to investigate the quality characteristics of yoghurt with varying contents of Sanmeoru (Vitis amurensis Ruprecht) wine (SW). Yoghurts were fermented with 2 kinds of lactic acid bacteria (Streptococcus thermophilus and Lactobacillus bulgaricus; Yo-$MIX^{TM5}505$, Danisco, Denmark). The changes in quality characteristics were investigated during fermentation and storage, and anthocyanin composition was analyzed after fermentation. The pH decreased in all treatments, while titratable acidity and viscosity gradually increased during fermentation. The viscosity of the yoghurt with 5.0% cultured SW added was higher than in other groups. The viable counts of lactic acid bacteria gradually increased during fermentation. The sample of the 5.0% cultured SW-yoghurt was higher than that of the other groups. The pH slowly decreased during the storage period; this was lower in the control yoghurt than in the yoghurts containing SW, and the changes of titratable acidity in the samples containing 5.0% and 30.0% cultured SW were lower than that in the yoghurt containing 1.0% cultured SW and in the control. The change in viscosity and number of viable cells during storage was higher in the yoghurts containing SW than in the control group. The levels of anthocyanin increased with the SW content in the yoghurt. Sensory scores for taste of the yoghurt with 1.0% added SW was significantly higher than for the other groups. Yoghurt with added SW kept at $4^{\circ}C$ for 12 days retained its quality characteristics fairly well.

• Cross-Cultural Studies
• /
• v.42
• /
• pp.505-524
• /
• 2016

This study examines the ways District 9, a film released in 2009, reworks the sci-fi genre to explore the human encounter with "other" alien populations. Like Avatar, released in the same year, District 9 addresses the tropes of conflict over land and human-alien hybridity and introduces non-humans and aliens, not as invaders, but as objects of human oppression and cruelty. Unlike many other science fiction films where the encounter between humans and non-humans occurs in an unidentifiable future time and location, District 9 crosses genre barriers to engage with urban realism, producing a social critique of contemporary urban population problems. The arrival of aliens in District 9 occurs as part of the recorded human past and the film's action is carried out in the present time in the specifically identified city of Johannesburg. A distinctly anti-Hollywood film that locates the action at the street level, District 9 plays out human anxieties about contact with others by referencing the divisions and conflicts historically attached to South Africa's sprawling metropolis and its current problems of urban poverty and illegal immigrants. Focusing on how this particular urban setting frames the film, the study investigates the ways Blomkamp's sci-fi film about extra-terrestrials presents a curious postcolonial mix of aliens and immigrants surviving in abject conditions in an urban slum and forces a realistic examination of the contemporary social problems faced by South Africa's largest city and by extension other major global cities. The paper also examines the film's representation of the human-alien hybrid and its potential as a force to resist human exploitation of the other. It also claims that though the setting is highly local, District 9 speaks to a wider global audience by making obvious the exploitative practices of profit-seeking multinationals. A sci-fi film that is keen on making a social commentary on urban population conflicts, District 9 resonates with the wider sense of insecurity and fear of others that form the horizon of the uncertain and potentially violent contemporary human world.