• 제목/요약/키워드: C-C Bond formation

검색결과 240건 처리시간 0.028초

Self-patterning 기술을 이용한 강유전체 메모리 전극용La0.5Sr0.5CoO3박막의 제조에 관한 연구 (A Study on Fabrication of La0.5Sr0.5CoO3Thin Films as an Electrode for Ferroelectric Memory by Self-patterning Technique)

  • 손현수;김병호
    • 한국세라믹학회지
    • /
    • 제40권2호
    • /
    • pp.153-158
    • /
    • 2003
  • Photosensitive sol solution을 이용한 self pattern된 박막은 photoresist/dry etching process에 비해 박막의 제조과정이 간단하다는 장점을 가지고 있다. 이 연구에서는 강유전성 메모리소자의 산화물 전극재료로 사용되고 있는 La$_{0.5}$Sr$_{0.5}$CoO$_3$(LSCO)극 photosensitive sol solution을 이용하여 spin coating법으로 제조하였으며 출발원료는 La-2methoxyethoxide, Sr-ethoxide, Co-2methoxyethoxide를 사용하였다. LSCO gel 박막에 UV 노광시간을 증가시킴에 따라 M(metal)-O-M 결합이 생성되면서 metal $\beta$-diketonate의 UV 흡수 피크 강도는 감소되었고 LSCO gel 박막에 UV조사에 따른 용해도 차이가 생기면서 fine patterning 을 얻을 수 있었다. 68$0^{\circ}C$ 이상의 온도로 대기 중에서 열처리된 LSCO 박막은 perovskite 상을 나타내었고 74$0^{\circ}C$에서 가장 낮은 비저항값(4$\times$10 ̄$^3$Ωcm)을 얻을 수 있었다.

알콕사이드로부터 Mullite 분말의 합성 및 Mullite-Zirconia 복합체의 특성 (Synthesis of Mullite Powder from Alkoxides and the Properties of the Mullite-Zircocnia Composites)

  • 함종근;이홍림
    • 한국세라믹학회지
    • /
    • 제27권2호
    • /
    • pp.201-210
    • /
    • 1990
  • The mullite-15v/o ZrO2 composites were prepared by dispersing ZrO2-3m/o Y2O3 powders into the mullite matrix in order to improve the mechanical properties of the mullite. The densification and retention of t-ZrO2 in the matrix of synthetic mullite were also investigated. From IR spectroscopic analysis, the obtained amorphous SiO2-Al2O3 powder was observed to have Si-O-Al chemical bond in its structure which might result in the homogeneous mullite composition. The lattice parameter of the mullite powder calcined above 130$0^{\circ}C$ (a0=7.5468$\AA$) is nearly close to the value of stoichiometric mullite (71.8wt% Al2O3, a0=7.5456$\AA$). The sintering behavior, microstructure, flexural strength and fracture toughness of the mullite and mullite-15v/o ZrO2 composites have been studied. The mullite-15v/o ZrO2(+3m/o Y2O3) ceramics with relative densities of 96% were obtained when sintered at 1$600^{\circ}C$. The flexural strength and fractrue toughness of the composites sintered at 1$600^{\circ}C$(calcination temperature of mullite powders ; 125$0^{\circ}C$) had maximum values of 307MPa and 2.50MPa.m1/2, respectively. The fracture toughness improvement in the mullite-ZrO2 cmoposite is assumed to be resulted from the combined effect of the stress-induced phase transformation of tetragonal ZrO2 and the crack deflection due to microcracking by the monoclinic ZrO2 formation.

  • PDF

Insight Into Genes Involved in the Production of Extracellular Chitinase in a Biocontrol Bacterium Lysobacter enzymogenes C-3

  • Choi, Hoseong;Kim, Hyun Jung;Lee, Jin Hee;Kim, Ji Soo;Park, Seur Kee;Kim, In Seon;Kim, Young Cheol
    • The Plant Pathology Journal
    • /
    • 제28권4호
    • /
    • pp.439-445
    • /
    • 2012
  • The chitinase producing Lysobacter enzymogenes C-3 has previously been shown to suppress plant pathogens in vitro and in the field, but little is known of the regulation of chitinase production, or its role in antimicrobial activity and biocontrol. In this study, we isolated and characterized chitinase-defective mutants by screening the transposon mutants of L. enzymogenes C-3. These mutations disrupted genes involved in diverse functions: glucose-galactose transpoter (gluP), disulfide bond formation protein B (dsbB), Clp protease (clp), and polyamine synthase (speD). The chitinase production of the SpeD mutant was restored by the addition of exogenous spermidine or spermine to the bacterial cultures. The speD and clp mutants lost in vitro antifungal activities against plant fungal pathogens. However, the gluP and dsbB mutants showed similar antifungal activities to that of the wild-type. The growth of the mutants in nutrient rich conditions containing chitin was similar with that of the wild-type. However, growth of the speD and gluP mutants was defective in chitin minimal medium, but was observed no growth retardation in the clp and dsbB mutant on chitin minimal medium. In this study, we identified the four genes might be involved and play different role in the production of extracellular chitinase and antifungal activity in L. enzymogenes C-3.

$Ta_2O_{5}$ 커패시터 박막의 유전 특성과 열 안정성에 관한 연구 (The Study on Dielectric Property and Thermal Stability of $Ta_2O_{5}$ Thin-films)

  • 김인성;이동윤;송재성;윤무수;박정후
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제51권5호
    • /
    • pp.185-190
    • /
    • 2002
  • Capacitor material utilized in the downsizing passive devices and dynamic random access memory(DRAM) requires the physical and electrical properties at given area such as capacitor thickness reduction, relative dielectric constant increase, low leakage current and thermal stability. Common capacitor materials, $SiO_2$, $Si_3N_4$, $SiO_2$/$Si_3N_4$,TaN and et al., used until recently have reached their physical limits in their application to several hundred angstrom scale capacitor. $Ta_2O_{5}$ is known to be a good alternative to the existing materials for the capacitor application because of its high dielectric constant (25 ~35), low leakage current and high breakdown strength. Despite the numerous investigations of $Ta_2O_{5}$ material, there have little been established the clear understanding of the annealing effect on capacitance characteristic and conduction mechanism, design and fabrication for $Ta_2O_{5}$ film capacitor. This study presents the structure-property relationship of reactive-sputtered $Ta_2O_{5}$ MIM capacitor structure processed by annealing in a vacuum. X-ray diffraction patterns skewed the existence of amorphous phase in as-deposited condition and the formation of preferentially oriented-$Ta_2O_{5}$ in 670, $700^{\circ}C$ annealing. On 670, $700^{\circ}C$ annealing under the vacuum, the leakage current decrease and the enhanced temperature-capacitance characteristic stability. and the leakage current behavior is stable irrespective of applied electric field. The results states that keeping $Ta_2O_{5}$ annealed at vacuum gives rise to improvement of electrical characteristics in the capacitor by reducing oxygen-vacancy and the broken bond between Ta and O.

Benzyl Benzenesulfonate와 피리딘과의 고압반응에 대한 반응속도론적 연구 (Kinetics for the Reaction of Benzyl Benzenesulfonate with Pyridine in Acetone Under High Pressure)

  • 황정의;여수동;지종기
    • 대한화학회지
    • /
    • 제24권2호
    • /
    • pp.150-154
    • /
    • 1980
  • Benzyl benzenesulfonate와 피리딘의 반응속도를 아세톤 용매중에서 20∼$40^{\circ}C$ 및 1∼2000 bars에서 전기전도도법으로 측정하였다. 반응속도는 온도 및 압력이 증가함에 따라 증가하였다. 이 반응의 활성화엔탈피$({\Delta}H^{\neq})$, 엔트로피$({\Delta}S^{\neq})$ 그리고 활성화부피$({\Delta}V^{\neq})$를 구하였다. 이 반응에서 압력변화에 대한 $({\Delta}H^{\neq})$$({\Delta}S^{\neq})$사이에 등속관계가 성립하였으며 등속온도는 $342^{\circ}K$였다. 이상의 결과로 본 반응은 전이상태에서 $C{\cdots}N$ 결합형성이 주로 반응속도를 결정하는 $S_N2$ 반응 메카니즘으로 진행된다는 것을 알았다.

  • PDF

Au 스터드 범프와 Sn-3.5Ag 솔더범프로 플립칩 본딩된 접합부의 미세조직 및 기계적 특성 (Interfacial Microstructure and Mechanical Property of Au Stud Bump Joined by Flip Chip Bonding with Sn-3.5Ag Solder)

  • 이영규;고용호;유세훈;이창우
    • Journal of Welding and Joining
    • /
    • 제29권6호
    • /
    • pp.65-70
    • /
    • 2011
  • The effect of flip chip bonding parameters on formation of intermetallic compounds (IMCs) between Au stud bumps and Sn-3.5Ag solder was investigated. In this study, flip chip bonding temperature was performed at $260^{\circ}C$ and $300^{\circ}C$ with various bonding times of 5, 10, and 20 sec. AuSn, $AuSn_2$ and $AuSn_4$ IMCs were formed at the interface of joints and (Au, Cu)$_6Sn_5$ IMC was observed near Cu pad side in the joint. At bonding temperature of $260^{\circ}C$, $AuSn_4$ IMC was dominant in the joint compared to other Au-Sn IMCs as bonding time increased. At bonding temperature of $300^{\circ}C$, $AuSn_2$ IMC clusters, which were surrounded by $AuSn_4$ IMC, were observed in the solder joint due to fast diffusivity of Au to molten solder with increased bonding temperature. Bond strength of Au stud bump joined with Sn-3.5Ag solder was about 23 gf/bump and fracture mode of the joint was intergranular fracture between $AuSn_2$ and $AuSn_4$ IMCs regardless bonding conditions.

Facile Formation of Unexpected [m,6,n]-tricyclic Spiranes via Intramolecular [3+2] Cyclization of Platinum-bound Pyrylium with Alkenes

  • Oh, Chang-Ho;Tak, Sang-Yong;Lee, Ji-Ho;Piao, Lanhua
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권spc8호
    • /
    • pp.2978-2980
    • /
    • 2011
  • Enynals bearing an olefinic pendant were successfully cyclized via Huisgen-type [3+2] cycloaddition to the tetracyclic Pt-carbene complexes which would undergo insertion into a C-H bond of the ${\beta}$-position to afford the fused cyclopropane intermediates. Their tandem rearrangement afforded diverse types of spiranes depending on the tethered alkenes of the enynals.

Kinetics and Mechanism of Anilinolysis of Phenyl N-Phenyl Phosphoramidochloridate in Acetonitrile

  • Hoque, Md. Ehtesham Ul;Lee, Hai-Whang
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권10호
    • /
    • pp.3274-3278
    • /
    • 2012
  • The kinetic studies on the reactions of phenyl N-phenyl phosphoramidochloridate (8) with substituted anilines ($XC_6H_4NH_2$) and deuterated anilines ($XC_6H_4ND_2$) have been carried out in acetonitrile at $60.0^{\circ}C$. The obtained deuterium kinetic isotope effects (DKIEs; $k_H/k_D$) are huge secondary inverse ($k_H/k_D$ = 0.52-0.69). A concerted mechanism is proposed with a backside attack transition state (TS) on the basis of the secondary inverse DKIEs and the variation trends of the $k_H/k_D$ values with X. The degree of bond formation in the TS is really extensive taking into account the very small values of the DKIEs. The steric effects of the two ligands on the rates are extensively discussed for the aminolyses of the chlorophosphate-type substrates on the basis of the Taft equation.

철근콘크리트보의 휨-전단균열에 대한 파괴역학적 해석 (Fracture Analysis of Flexural-Shear Failure in RC Beams)

  • 임철원;김대중;김우
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
    • /
    • pp.418-423
    • /
    • 1998
  • This paper is intended to investigate the behavior of flexural-shear cracking in reinforced concrete beams without web reinforcement with FEM incorporated into a linear elastic fracture mechanics approach(LEFM). Each crack was propagated progressively by a finite length, then the quantitative reponses were examined. The results show that the horizontal crack was initiated by the bond-jnduced shear stress due to horizontal shearing action of the T-C force couple after the formation of the critical flexural crack. Also, the horizontal crack is considered to be a major factor of shear failure in slender reinforced concrete beams without web reinforcement.

  • PDF

Explorative and Mechanistic Studies of the Photooxygenation of Sulfides

  • Albini, Angelo;Bonesi, Sergio M.
    • Journal of Photoscience
    • /
    • 제10권1호
    • /
    • pp.1-7
    • /
    • 2003
  • The results of recent work on the dye-sensitized photooxygenation of sulfides is discussed. In the case of dialkyl sulfides, the weakly bonded adduct initially formed with singlet oxygen (the persulfoxide) decays unproductively unless protonation by an acid (an alcohol or a carboxylic acid) facilitates its conversion to the sulfoxide. The effect is proportional to the strength of the acid (eg., less than 0.1 % chloroacetic acid in benzene is sufficient for maximal efficiency) and corresponds to general acid catalysis, suggesting that protonation of the persulfoxide occurs. On the other hand, with sulfides possessing an activated hydrogen in ${\alpha}$ position (eg., benzyl and allyl sulfides), hydrogen transfer becomes an efficient process in aprotic media and yields a S-hydroperoxysulfoniumm ylide, possibly arising from a conformation of the persulfoxide that is different from the one protonated in the presence of acids. Calculations on some substituted sulfides support this hypothesis. This process, which leads to C-S bond fragmentation with formation of an aldehyde, may be viewed as a general method for the preparation of aryl and heteroaryl aldehydes. In this effort, mechanistic studies offered new hints on the structure of the intermediate persulfoxide.

  • PDF