• Journal of Korean Neurosurgical Society
• /
• v.30 no.2
• /
• pp.131-136
• /
• 2001

Object : The clinical uses of screws are increasing with broader applications in spinal disorders. When screws are inserted repeatedly to achieve optimal position, tips of screw pitch may become damaged during insertion even though there are significant differences in the moduli of elasticity between bone and titanium. The effect of repeated screw insertion on pullout resistance was investigated. Methods : Three different titanium screws(cortical lateral mass screw, cancellous lateral mass screw and cervical vertebral body screw) were inserted into the synthetic cancellous material and then extracted axially at a rate of 2.4mm/min using Instron(Model TT-D, Canton, MA). Each set of screws was inserted and pulled out three times. There were six screws in each group. The insertional torque was measured with a torque wrench during insertion. Pullout strength was recorded with a digital oscilloscope. Results : The mean pullout force measurements for the cortical lateral mass screws($185.66N{\pm}42.60$, $167.10N{\pm}27.01$ and $162.52 N{\pm}23.83$ for first, second and third pullout respectively : p=0.03) and the cervical vertebral body screws($386.0N{\pm}24.1$, $360.2N{\pm}17.5$ and $330.9N{\pm}16.7$ : p=0.0024) showed consecutive decrease in pullout resistance after each pullout, whereas the cancellous lateral mass screws did not($194.00N{\pm}36.47$, $219.24N{\pm}26.58$ and 199.49N(36.63 : p=0.24). The SEM after insertion and pullout three times showed a blunting in the tip of the screw pitch and a smearing of the screw surface. Conclusions : Repetitive screw insertion and pullout resulted in the decrease of pullout resistance in certain screws possibly caused by blunting the screw tip. This means screw tips suffer deformations during either repeated insertion or pullout. Thus, the screws that have been inserted should not be used for the final construct.

• Current Research on Agriculture and Life Sciences
• /
• v.13
• /
• pp.31-44
• /
• 1995

Mt. Kumjeong is located in south-eastern part of the Korean Peninsular($129^{\circ}$01' to $129^{\circ}$05' E, $35^{\circ}$03' to $35^{\circ}$17' N) and the altitude of the summit is 802 meter. In order to find out the vegetation units which made it possible to classify subtropical forest and south-temperate forest, Mt. Kumjeong (which is located in a border of between subtropical forest and south-temperate forest) was selected as a study area. The primary result of actual vegetation analysis in Mt. Kumjeong based upon the vegetation community analysis methods by the ZM-school, and the relationships between vegetation community and two parameters(altitude, topography) analyzed by using coincidence analysis method were summarized as followings. 1. Based upon analytic methods of the vegetation community by the ZM-schools, the primary analytic result of the analysis of vegetation community in Mt. Kumjeong was divided into 10 communities, 9 groups, 2 subgroups. 2. Eurya japonica group of Pinus densiflora community out of 16 vegetation units was thought as a indicator vegetation group which made it possible to border subtropical forest and south-temperate forest. 3. Natural regeneration of Stewartia koreana group was thought to be difficult because seedling and sapling was rarely showed, 4. In relationship between vegetation units and altitude, Carpinus tschonoskii community, Quercus variabilis community, Quercus serrata community, Wisteria floribunda community,. Eurya japonica group of Pinus densiflora community, Pinus thunbergii community mainly distributed below altitude 500 meter, and Quercus mongolica community, Typical group of Pinus densiflora community, Quercus dentata community, Carpinus coreana community, Quercus acutissima community mainly distributed above altitude 500 meter. 5. In relationship between vegetation units and topography, Carpinus tschonoskii community, Quercus variabilis community, Quercus serrata community, Wisteria floribunda community,. Eurya japonica group of Pinus densiflora community distributed below middle slope, Quercus mongolica community, Typical group of Pinus densifiora community, Quercus dentata community, Carpinus coreana community, Pinus thunbergii community Quercus acutissima communily clistributed above midclle slope.

• Journal of Yeungnam Medical Science
• /
• v.22 no.2
• /
• pp.166-182
• /
• 2005

Background: Cyclin-dependent kinase (CDK) inhibitors are family of molecules that regulate the cell cycle. The CDKN2, a CDK4 inhibitor, also called p16, has been implicated in human tumorigenesis. The CDKN2 inhibits the cyclin/CDK complexes which regulate the transition from G1 to S phase of cell cycle. There is a previous report that homozygous deletion of CDKN2 region on chromosome 9p21 was detected frequently in astrocytoma, glioma and osteosarcoma, less frequently in lung cancer, leukemia and ovarian cancer, but not detected in colon cancer and neuroblastoma. However, little is known about the relationship between CDKN2 and laryngeal cancer. Therefore this study was initiated to investigate the role of CDKN2 in human laryngeal squamous cell carcinoma development.1) Materials and methods: We used 5 human laryngeal carcinoma cell lines whether they have deletions or losses of CDKN2 gene expression by DNA-PCR or RT-PCR, respectively. We examined 8 fresh frozen human laryngeal cancer tissues to detect the loss of heterozygosity (LOH) of CDKN2. PCR was performed by using microsatellite markers of short arm of human chromosome 9 (D9S126, D9S144, D9S156, D9S161, D9S162, D9S166, D9S171, D9S200 and D9SIFNA). For informative cases, allelic loss was scored if the signal of one allele was significantly decreased in tumor DNA when compared to the same allele in normal DNA. Results: The CDKN2 DNA deletion was observed in 3 cell lines. The CDKN2 mRNA expression was observed in only one cell line, which was very weak. LOH was detected in 7 cases (87.5%). Conclusion: These results suggest that CDKN2 plays a role in the carcinogenesis of human laryngeal squamous cell carcinoma.

• Journal of agriculture & life science
• /
• v.44 no.4
• /
• pp.45-55
• /
• 2010

In this study, the acetylcholinesterase (AChE) inhibition and neuronal cell protective effects of water, 100% methanol and dichlromethane extracts from garlic were investigated. We found that dichloromethane extract of garlic resulted in a dose-dependent manner on AChE inhibition ($IC_{50}$: $36.1{\mu}g/mL$). In cell viability assay using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazoliumbromide (MTT), cell viabilities of water, 100% methanol and dichlromethane extracts were lower (almost under 40%) than amyloid ${\beta}$ protein ($A{\beta}$)-induced neurotoxicity. Because $A{\beta}$ is also known to increase neuronal cell membrane breakdown, neuronal apoptosis was further confirmed by lactate dehydrogenase (LDH) and neutral red uptake (NRU) assay. Water extract presented relative protection against $A{\beta}$-induced membrane damage in LDH assay. However all garlic extracts showed significant problem with decrease of cell viability in NRU assay, especially at dichloromethan extract. To determine active compounds in column fractions (98:2 fraction) from dichloromethane extract which showed significant AChE inhibitory effect, we performed HPLC and LC-MS analysis. It was supposed that garlic may contain allyl methyl disulfide, diallyl monosulfide, and diallyl disulfide as active compounds.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.438-446
• /
• 2019

The interest in mini watermelon (Citrullus lanatus) with small fruits weighing 2-3 kg has increased by the increasing trend in one-person households and consequent tendency to consume small meals. Watermelon grafting onto cucurbit rootstocks is a very effective way to control soil-borne diseases, such as Fusarium wilt; however, this practice negatively impacts the fruit quality. This study was conducted to investigate the growth, fruit set, and fruit quality of mini watermelon grafted onto wild watermelon accessions (Citrullus spp.) resistant to Fusarium wilt. Five watermelon accessions (Galactica, IT 208441, PI 482322, PI 500303, and PI 593358) were evaluated as rootstocks for the mini watermelon "Ministar". Non-grafted "Ministar" and "Ministar" grafted onto "Shintozwa" (Cucurbita maxima D. C. moschata D.) or "Bullojangsaeng" (Lagenaria leucantha) were used as controls. The roots of the transplants grafted onto "PI 593358" and "Shintozwa" weighed more than those on other rootstocks. Additionally, the transplants on "PI 593358" showed better growth and fruit set in the field than the other transplants. However, the total soluble solid contents and fruit quality indices of the transplants on "PI 593358" and "Shintozwa" were lower, whereas the total fruit quality index of those on "PI 482322" was higher. Thus, the wild watermelon accessions tested can potentially be used as basic germplasm for developing watermelon rootstocks instead of cucurbit rootstocks. The most promising accession for this purpose was found to be "PI 482322".

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.131-136
• /
• 1990

여러해 전부터 선박의 생산실적이나 생산성 관련 자료를 기록하고 보완하는 작업을 꾸준히 개선토록 노력해온 결과중 중요한 것 하나는, 선박의 여러 가지 설계 검토과정에서 충분히 활용할 수 있는 함축성 있고 믿을만한 형태의 생산정보를 제공해줄 수 있게 되었다는 것이라고 말 할 수 있겠다. 이러한 자료들은 생산계획상 각 단계(stage)에서의 작업량, 예상재료비와 인건비의 산출등이 포함될 수 있으며, 선박이나 해상구조물의 전반적인 설계방법론(design methodology)을 개선코자 한다면 ''생산지향적 설계(Design for Production)''의 근간이 되는 선박건조전략(build strategy), 구매정책(purchasing policy)과 생산기술(production technology)에 대한 폭넓은 지식이 한데 어우러져야 한다. 최근에는 CIMS의 일부분에서 보는 바와 같은 경영관리, 설계 및 생산지원 시스템의 도입으로 이와 같은 설계 프로세스의 추진을 가능케하고 있다. 이와 병행하여 설계를 지원하기 위한 전산기술, 특히 대화형 화상처리기술(interactive graphics)의 발달은 설계자가 선박의 형상이나 구조 배치를 여러 가지로 변화시켜 가면서 눈으로 즉시 확인할 수 있도록 설계자의 능력을 배가시키는데 크게 기여하고 있다. 여러 가지의 설계안(alternative design arrangement)을 신속히 만들어내고 이를 즉시 검토 평가할 수 있는 능력을 초기설계 단계에서 가질 수 있다면 이는 분명히 큰 장점일 것이며, 더구나 설계초기 단계에 생산관련인자를 설계에서 고려할 수 있다면 이는 더욱 두드러진 발전일 것이다. 생산공법과 관련생산 비용을 정확히 반영한 각 가지의 설계안을 짧은 시간내에 검토하고 생산소요 비용을 산출하여 비교함으로써, 수주계약단계에서 실제적인 생산공법과 신뢰성있는 생산실적자료를 기준으로 하여 총 건조비(total production cost)를 최소로 하는 최적의 설계를 선택할 수 있도록 해 줄 것이다. 이제 이와 같은 새로운 설계도구(design tool)를 제공해 주므로써 초기설계에 각종 생산관련 정보나 지식 및 실적자료가 반영가능토록 발전되었다. 본 논문은 영국의 뉴카슬대학교(Univ. of Newcastle upon Type)에서 위에 언급한 특징들을 반영하여 새로운 선박구조 설계 방법을 개발한 연구결과를 보여주고 있다. 본 선계연구는 5단계로 구분되는데; (1) 컴퓨터 그라픽스를 이용하고 생산정보 데이타베이스와 연결시켜 구조형상(geometry)을 정의하고 구조부재 칫수(scantling) 계산/결정 (2) 블럭 분할(block division) 및 강재 배치(panel arrangement)의 확정을 위해 생산기술 및 건조방식에 대한 정보 제공 (3) 상기 (1) 및 (2)를 활용하여 아래 각 생산 단계에서의 생산작업 분석(work content assessment) a) 생산 준비 단계(Preparation) b) 가공 조립 단계(Fabrication/Assembly) c) 탑재 단계(Erection) (4) 각각의 설계(안)에 대하여 재료비(material cost), 인건비(labour cost) 및 오버헤드 비용(overhead cost)을 산출키 위한 조선소의 생산시설 및 각종 품셈 정보 (5) 총 건조 비용(total production cost)을 산출하여 각각의 설계안을 비교 검토. 본 설계 방식을 산적화물선(Bulk Carrier) 설계에 적용하여 구조배치(structural geometry), 표준화의 정도(levels of standardisation), 구조생산공법(structural topology) 등의 변화에 따른 설계 결과의 민감도를 분석(sensitivity studies)하였다. 전산장비는 설계자의 대화형 접근을 용이하도록 하기 위해 VAX의 화상 처리장치를 이용하여 각 설계안에 대한 구조형상과 작업분석, 건조비 현황 등을 제시할 수 있도록 하였다. 결론적으로 본 연구는 설계초기 단계에서 상세한 건조비 모델(detailed production cost model)을 대화형 화상 처리방법에 접합시켜 이를 이용하여 여러가지 설계안의 도출과 비교검토를 신속히 처리할 수 있도록 함은 물론, 각종 생산 실적정보를 초기설계에 반영하는 최초의 시도라고 믿으며, 생산지향적(Design for Production) 최적설계분야의 발전에 많은 도움이 되기를 기대해 마지 않는다. 참고로 본 시스템의 설계 적용결과를 부록에 요약 소개하며, 상세한 내용은 참고문헌 [4] 또는 [7]을 참조 요망한다.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.28 no.1
• /
• pp.80-98
• /
• 2002

Taxus cuspidata Sieb selected cultivation as drug, food and decorative plant in Kyong-gi province in Korea. As a manufacturing method, there were extracted from 250g of dried-leaf and 300g of dried-stem with each 200g of BG, PG and water (to 100) mixing for 72 hour at 50$\pm$5$\^{C}$ and then they were filtered by 400-mesh filter. Appearance of extract of leaves was slight brown, pH=5.3$\pm$0.5, gravity was 1.012$\pm$0.05, and a reflective index was 1.375$\pm$0.05. And appearance of extract of stems was slightly dark brown, pH=5.4$\pm$0.5, gravity was 1.016$\pm$0.05, and a reflective index was 1.358$\pm$0.05. It was extracted oil from Taxus seed. Gravity was 0.922$\pm$0.05 and it should be obtained the 27.0$\pm$0.5% of yield. The molecular weight of polysaccharide was about 50,000 to 300,000 dalton and contained 5.0$\pm$1.2% of yield from Taxus fruit. The determinations of total polyphenols in measuring spectropotometer got 0.563% in leaves, and 0.325% in stems, whereas the quantitives of total tannins got 0.054% and 0.037%, respectively. As the effects in Cosmetics by DPPH-method, the antioxidative activities were very strong that the inhibitory ratio showed 75% in leaves and 64% in stems compared with 52% in greentea extract. These are more effective than other plant extracts. The increasing ratio of collagen synthesis rate on the activating fibroblast for extracts of Taxus cuspidata Sieb showed 54.16% (stems) and 33.18% (leaves), To improve the skin elasticity, PPE(porcine pancreatic elastase)-inhibitory activities were strongly effective as 13,7% (stems), 23.5% (leaves) and 66%(seed). Anti-inflammatory acitvity of seed oil was very the above 41% stronger than SG was 24% of anti-Inflammatory as a control sample.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.26 no.1
• /
• pp.163-186
• /
• 2000

We have previously screened 150 medicinal plants on the inhibition of elastase and found a significant inhibitory effects of the extracts of Areca catechu L. on the aging and inflammation against the skin tissues. To isolate and identify the compounds having biological activity, we was further purified by each of the solvent fractions, silica gel column chromatography, preparative TLC and reversed-Phase HPLC. Peak in HPLC, which coincided with the inhibitory activity against elastase, was identified as Phenolic substance using various colorimetric methods, UV, and IR. $IC_{50}$/ values of phenolic substance purified from Areca catechu were 26.9 $\mu\textrm{g}$/$m\ell$ for porcine pancreatic elastase (PPE) and 60.8 $\mu\textrm{g}$/$m\ell$ for human neutrophil elastase (HNE). This Phenolic substance showed more potent activity than those of reference compounds, oleanolic acid (76.5 $\mu\textrm{g}$/$m\ell$ for PPE, 219.2 $\mu\textrm{g}$/$m\ell$ for HNE) and ursolic acid (31.0 $\mu\textrm{g}$/$m\ell$ for PPE, 118.6 $\mu\textrm{g}$/$m\ell$ for HNE). According to the Lineweaver-Burk Plots, the inhibition against both PPE and HNE by this phenolic substance was competitive with substrate. Phenolic substance from Areca catechu exhibited high free radical scavenging effect ($SC_{50}$/ : 6 $\mu\textrm{g}$/$m\ell$) and inhibited effectively hyaluronidase activity ($IC_{50}$/: 210 $\mu\textrm{g}$/$m\ell$). These results suggest that the Phenolic substance Purified from Areca catechu showed anti-aging effect by protecting connective tissue proteins.

• Food Science and Preservation
• /
• v.24 no.3
• /
• pp.351-360
• /
• 2017

We have studied the technology to extend the storage period of 'Seolhyang' strawberries using modified atmosphere package (MAP) and ethyl pyruvate (EP) treatment for domestic distribution and export. The selected ripe strawberries harvested on December 28, 2016 at the Sancheong farmhouse were transported to the laboratory for 2 h and tested. After a day's precooling at $4^{\circ}C$, the strawberries were divided into seven experimental groups. These groups were control, active MAP using low density polyethylene (LDPE), active MAP using polyamide (PA), active MAP using PA with EP treatment, passive MAP using LDPE, passive MAP using PA and passive MAP using PA with EP treatment. Quality analysis was carried out every 4 days during the storage period of 16 days. During the storage period of 16 days, MAP decreased from 3.5% to less than 1.1% in weight loss ratio compared with control, and decreased from 36% to less than 7% in fungal incidence. In the case of fungi in the EP treatment group, hyphae did not grow on the outside of the strawberry but grew to the inside. This tendency was similar to that in the low oxygen and high carbon dioxide environment of the MAP, the mycelium of the fungus did not grow outside of the strawberry. Fungi are the biggest problem in the distribution and export of strawberries, and these results suggest that MAP alone could inhibit mold and increase shelf life.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.4
• /
• pp.429-439
• /
• 1999

Potentiometric titration data were collected for some humic acids purified from Korean upland and paddy soils over a range of pH (3.0 - 11.0) with $NaNO_3$ background electrolyte concentrations (0.01, 0.10, 0.50 and 1.00 M). The data were applied to model A and V which included both intrinsic heterogeneity of humic materials and electrostatic interaction influences on binding sites. The elemental analysis were conducted for various type of humic samples. The $E_4/E_6$ ratio proposed negative correlation with the total carboxyl groups ($r^2$= 0.9988). The charge ($cmol_c\;kg^{-1}$) on the humic acids became more negative as the ionic strength increased. In both continuous and batch titrations, the ionic strength effect was greater in Namweon series (pH 6.39) than others at pH 5.00. The effect of ionic strength on surface charge appears to be greater in batch titrations. This could suggest that continuous titrations do not represent an equilibrium state and the effects of electrolyte concentration was not fully realized during the course of titrations. Both models described experimental data obtained from continuous and batch titrations well over a range of ionic strengths. Model A is more simpler than model V but adaptes more fitted parameters. Thus, the observed change in apparent binding constants with surface charge is regarded solely due to electrostatic influences rather than functional group heterogeneity. However, Model V is more mechanistically realistic in a number of discrete ligand binding sites.