• 대한기계학회논문집A
• /
• 제31권11호
• /
• pp.1093-1099
• /
• 2007

A compressive split Hopkinson pressure bar (SHPB) technique is used to investigate the dynamic behavior of SM45C at high temperature. A radiant heater, which consists of one ellipsoidal reflector and one halogen lamp, is used to heat the specimen. Specimens are tested from $600^{\circ}C$ to $1000^{\circ}C$ at intervals of $100^{\circ}C$ at a strain-rate ranging from 1100/s to 1150/s. A critical phenomenon occurs between $700^{\circ}C$ and $750^{\circ}C$ in SM45C. This phenomenon results in the drastic drop in a flow stress. In a modified Johnson-Cook constitutive equation, a reducer function is used to take into account for the effect of the drastic drop in a flow stress. A reducer function, which is dependant on the temperature as well as the strain, is introduced and the parameters of the modified Johnson-Cook constitutive equation are determined from test results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.449-452
• /
• 1998

We have studied the oxidatio nrte of $Si_{1-x}Ge_{x}$ epitaxial layer grown by MBE(molecular beam epitaxy). Oxidation were performed at 700.deg. C, 800.deg. C, 900.deg. C, and 1000.deg. C. After the oxidation, the results of AES(auger electron spectroscopy) showed that Ge was completely rejected out of the oxide and pile up at $SiO_{2}/$Si_{1-x}Ge_{x}$ interface. It is shown that the presence of Ge at the $SiO_{2}$/$Si_{1-x}Ge_{x}$ interface changes the dry oxidation rate. The dry oxidation rate was equal to that of pure Si regardless of Ge mole fraction at 700.deg. C and 800.deg.C, while it was decreased at both 900.deg. C and 1000.deg.C as the Ge mole fraction was increased. The ry oxidation rates were reduced for heavy Ge concentration, and large oxidation time. In the parabolic growth region of $Si_{1-x}Ge_{x}$ oxidation, The parabolic rate constant are decreased due to the presence of Ge-rich layer. After the longer oxidation at the 1000.deg.C, AES showed that Ge peak distribution at the $SiO_{2}$/$Si_{1-x}Ge_{x}$ interface reduced by interdiffusion of silicon and germanium.

• 한국의류학회지
• /
• 제3권2호
• /
• pp.15-22
• /
• 1979

The heat setting of sewing thread is known to have some puckering. In this experiment, the P/C fabrec and polyester thread were heat setted at temperatures ranging from $70^{\circ}C$ to $150^{\circ}C$ at the interval of every $^20{\circ}C$ for the period of 1, 5, 10, 20 and 40 minutes resoectivly. The results obtained are as follows: 1) In general, the pre-laundering sewing shrinkage related negatively to time but related positively to temperature. And it showed the lowest rate at $110^{\circ}C$. 2) In case of slack treatment, the post-laundering sewing sewing shrinkage marked the lowest rate at $130^{\circ}C$ while that of stretch treatment showed the lowest rate at $90^{\circ}C$. 3) The rates of post-laundering sewing shrinkage were higher than those of pre-laundering shrinkage, the difference between them reached the bottom when applied the slack treatment at $130^{\circ}C$ and the streched treatment at $110^{\circ}C$.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권15호
• /
• pp.6005-6008
• /
• 2014

Aim: To compare recurrence rates of large loop excision of the transformation zone (LLETZ) with those of contour-loop excision of the transformation zone (C-LETZ) in the management of cervical intraepithelial neoplasia (CIN). Materials and Methods: The medical records of 177 patients treated consecutively by LLETZ and C-LETZ for CIN at Rajavithi Hospital between 2006 and 2009 were retrospectively reviewed. Results: Of the 87 women in the C-LETZ group, 2 cases (2.30%) had recurrence compared with 13 cases (14.4%) of the 90 women in the LLETZ group, the higher recurrence rate in the latter being statistically significant (p<0.05). Median times of follow up in the C-LETZ and LLETZ groups were 12 months and 14 months respectively (p>0.05). The C-LETZ group showed less intraoperative bleeding compared to the LLETZ group, but the rate of achievement of single specimens and positive margins were similar in the two groups. Conclusions: The present study demonstrated the superiority of C-LETZ over LLETZ in terms of efficacy; C-LLETZ is associated with a lower recurrence rate and also carries a smaller risk of intraoperative bleeding than LLETZ. The rotating technique still has a potential role in treating precancerous lesions of the cervix.

• Restorative Dentistry and Endodontics
• /
• 제41권4호
• /
• pp.262-270
• /
• 2016

Objectives: This study aimed to evaluate the healing rate of non-surgical endodontic treatment between C-shaped and non-C-shaped mandibular second molars. Materials and Methods: Clinical records and radiological images of patients who had undergone endodontic treatment on mandibular second molars between 2007 and 2014 were screened. The periapical index scoring system was applied to compare healing outcomes. Information about preoperative and postoperative factors as well as the demographic data of the patients was acquired and evaluated using chi-square and multinomial logistic regression tests. Results: The total healing rate was 68.4%. Healing rates for the mandibular second molar were 70.9% in C-shaped canals (n = 79) and 66.6% in non-C-shaped ones (n = 117). The difference was not statistically significant. Conclusions: The presence of a C-shaped canal in the mandibular second molar did not have a significantly negative effect on healing after treatment. Instead, proper pulpal diagnosis and final restoration were indicated as having significantly greater influence on the healing outcomes of C-shaped and non-C-shaped canals, respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제44권5호
• /
• pp.685-694
• /
• 2016

본 연구에서는 반탄화 과정에서 바이오매스 열분해 거동을 열중량 분석과 발생되는 기체분석으로 확인하였다. 반응온도는 $220{\sim}300^{\circ}C$, 승온속도 $10{\sim}30^{\circ}C/min$, 반응시간은 110분으로 고정하여 분석하였다. 백합나무 중량감소율은 $220^{\circ}C$에서 8.01~8.81%, $300^{\circ}C$에서 71.86~77.38%로 나타났으며, $240^{\circ}C$ 이상에서 급격하게 증가하였다. 반면 낙엽송 중량감소율은 $300^{\circ}C$에서 49.58~54.15%로 백합나무와 비교하여 낮았다. 백합나무에 대한 활성화 에너지는 87.32~91.24 kJ/mol으로 승온속도에 따라 큰 차이를 나타내지 않았으며, 낙엽송에 대한 활성화 에너지는 83.85~91.60 kJ/mol으로 나타났다. 반탄화 과정에서 발생하는 가스성분은 대부분 헤미셀룰로오스 유래 성분이었으며 반응온도가 증가하면서 성분의 종류 및 농도도 증가하였다. 백합나무에서는 furfural, acetic acid가 고농도로 검출되었다.

• 한국식품과학회지
• /
• 제10권1호
• /
• pp.52-56
• /
• 1978

쌀의 취반에 대한 기작을 아끼바레(도정도,50%,70% 및 90%)를 이용하여 연구하였다. 취반(취반온도 $90^{\circ}-120^{\circ}C$)후 밥알의 hardness는 Texturometer로 측정하였다. 취반속도는 1차 반응의 식으로 표시될 수 있었으며, 취반온도 $90^{\circ}-120^{\circ}C$사이의 온도 계수는 2 이었다. 취반의 활성화 에너지는 $100^{\circ}C$이하에서는 약 17,000cal/mole, $100^{\circ}C$ 이상에서는 약 9,000cal/mole이었다. 쌀의 도정도 및 쌀의 취반전 침지시간은 활성화 에너지에 영향을 주지 않았으나, 반응속도 상수는 도정도가 높아질수록 증가하였고 취반시간은 반대로 감소하였다. 쌀의 취반과정은 다음의 두 기작으로 설명할 수 있었다. 즉 취반온도는 $100^{\circ}C$이하에서는 쌀의 성분 및 물에 의한 화학반응이, 취반온도 $100^{\circ}C$이상에서는 취반된 부분으로부터 취반되지 않은 부분(즉 반응이 진행되고 있는 부분)으로의 물의 확산속도가 취반속도를 제한하였다.

• 한국생산제조학회지
• /
• 제19권5호
• /
• pp.631-636
• /
• 2010

SNCM420 steel is one of the cam shaft materials which are used in the supply unit for ship engine cam shaft. In this study the assessment of cutting behavior was conducted for the SNCM 420 steel and SM45C steel with various cutting conditions as depth of cut 0.5, 1.0, 1.5, 2.0mm and feed rate 0.1~0.3m/rev. The controlled chip was produced in feed rate 0.2, depth of cut 1.0 for SNCM420 and feed rate 0.2, depth of cut 2.0 for SM45C. There is no difference cutting force between SM45C and SNCM420 steels.

• 한국압력기기공학회 논문집
• /
• 제5권1호
• /
• pp.9-13
• /
• 2009

The containment local leakage rate testing in nuclear power plants is performed in accordance with ANSI/ANS-56.8(1994) in Korea. Two methods, the make-up flow rate and the pressure decay, are used for LLRT. Though ANSI/ANS-56.8 does not define clearly the minimum test duration for the make-up flow rate method, it requires obtaining the data after reaching the stable condition. Thus the prerequisite stable condition for data acquisition and the test period for type "C" LLRT is differently applied to each NPPs. Therefore, this study presents a unified test criteria for data stabilization and test duration through experiments to improve the test reliability for type "C".

• 대한화학회지
• /
• 제9권1호
• /
• pp.49-54
• /
• 1965

One of the difficult and time consuming problems in the production of magnesia from sea water is a settling rate of magnesium hydroxide. In this experiments, authors attempted to accelerate its settling rate by addition of various sedimenting agents as C.M.C., Separan and Starch, and sought for optimum calcination temperature for domestic dolomite, as alkali source, mole ratio of dolomite milk to bittern. It is observed through experiments that the small amounts of sedimenting agents, C.M.C., Separan, starch, 20 mg/l, 40 mg/l, 400mg/l, respectively increase the settling rate of magnesium hydroxide by 8 times or more. The following conditions resulted in good yield of magnesium hydroxide from sea water with relatively tolerable calcium oxide contaminated for the magnesium clinker. Calcinating temperature, $1,100{\sim}1,200^{\circ}C$, mole ratio of 10% dolomite milk to magnesium salts in sea water or bittern, 1. 2 : 1.