Journal of the Korean Society of Manufacturing Technology Engineers (한국생산제조학회지)

The Korean Society of Manufacturing Technology Engineers (한국생산제조학회)
권호 표지

Cutting Characteristic of SNCM420H steel for Ship Engine Supply Unit

선박엔진의 Supply Unit용 SNCM420H의 절삭특성

  • 최원식 (부산대학교 바이오산업기계공학과) ;
  • 성봉수 (대창 엔프라 (주)) ;
  • 강창원 (부산대학교 대학원 바이오산업기계공학) ;
  • 문희준 (부산대학교 대학원 바이오산업기계공학) ;
  • 권주리 (부산대학교 대학원 바이오산업기계공학)
  • Received : 2010.02.08
  • Accepted : 2010.08.31
  • Published : 2010.10.15
Download PDF
⟨ Previous Next ⟩

Abstract

SNCM420 steel is one of the cam shaft materials which are used in the supply unit for ship engine cam shaft. In this study the assessment of cutting behavior was conducted for the SNCM 420 steel and SM45C steel with various cutting conditions as depth of cut 0.5, 1.0, 1.5, 2.0mm and feed rate 0.1~0.3m/rev. The controlled chip was produced in feed rate 0.2, depth of cut 1.0 for SNCM420 and feed rate 0.2, depth of cut 2.0 for SM45C. There is no difference cutting force between SM45C and SNCM420 steels.

Keywords

References

  1. Choi, T. K., Kim, J. S., Park, J. H., and Lim, H. J., 2009, "The Machinability Estimation Depending on Cutting Condition in AI6061-T6 Turning Operations," Korea Society of Machine Tool Engineering, Vol. 18, No. 6, pp. 675-680.
  2. Jun, J. U., Chung, J. S., Choi, C. S., and Ha, M. K., 2001, "Analysis of Cutting Specific in Non-ferrous Metal by Changed rake-angle and feed-rate adjustment at Turning", Korea Society of Machine Tool Engineering, pp. 32-37.
  3. Lee, Y. M., Choi, W. S., Son, J. H., Bae, D. W., Son, S. P., and Hwang, K. S., 2007, "Estimation of the Maximum Underformed Chip Thickness Using the Average Grain Model," Korea Society of Machine Tool Engineering. Vol. 16, No. 2, pp. 30-36.
  4. Rotberg, J., Ber, A., and Wertheim, R., 1991, "Chip control in cut-off tools," Annals of the CIRP, Vol. 40/1, pp. 73-77. https://doi.org/10.1016/S0007-8506(07)61937-4
  5. Nakayama, K., 1962, "A Study of dte Chip Breaker," Trans. of JSME, Vol. 5, pp. 142-150. https://doi.org/10.1299/jsme1958.5.142
  6. Jawahir, I. S., Qureshi, N., and Arsecularatne, J. A., 1992, "On the Interrelationships of Some Machinability Parameters in Finish Turing with Cermet Chip Forming Tool Inserts," Int. J. Mach. Tools Manufact. Vol. 32, No. 5, pp. 709-723. https://doi.org/10.1016/0890-6955(92)90025-C
  7. Worthington, B., 1976, "A Comprehensive Literature Survey of Chip Control in Turning Process," Metal Cutting Machine Tools. Vol. 1, pp. 103-116.