• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1663-1672
• /
• 2018

In recent times, gas insulated medium voltage (MV) circuit breakers (CB) form a vital component in power system network, considering its advantages such as reduced size and safety margins. Gas insulation characteristics of circuit breakers are generally measured by lightning impulse (LI) test according to IEC standard 60060-1 as a factory routine test. Considering the environmental issues of $SF_6$ gas, many research works are being carried out towards the mixture of $SF_6$ gases for high voltage insulation applications. However, few reports are only available regarding the LI withstand and streamer propagation characteristics (at both positive and negative polarity of waveform) of $SF_6/N_2$ gas mixture insulated medium voltage circuit breakers. In this paper, positive and negative polarity LI tests are carried out on 22 kV medium voltage circuit breaker filled with $SF_6/N_2$ gas mixture at different gas pressures (1-5 bar) and at different gas mixture ratios. Important LI parameters such as breakdown voltage, streamer velocity, time to breakdown and acceleration voltage are evaluated with IEC standard LI ($1.2/50{\mu}s$) waveform. Weibull distribution analysis of LI breakdown voltage data is carried out and 50% probability breakdown voltage, scale parameter and shape parameter are evaluated. Results illustrate that the $25%SF_6+75%N_2$ gas filled insulation considerably enhances the LI withstand and breakdown strength of MV circuit breakers. LI breakdown voltage of circuit breaker under negative polarity shows higher value when compared with positive polarity. Results show that maintaining the gas pressure at 0.3 MPa (3 bar) with 10% $SF_6$ gas mixed with 90% $N_2$ will give optimum lighting impulse withstand performance of 22 kV MV circuit breaker.

• Applied Biological Chemistry
• /
• v.45 no.4
• /
• pp.207-211
• /
• 2002

This study was conducted to increase the shelf life of grape by edible coating material such as methyl cellulose (MC) with antimicrobial substances, n-capric acid isopropyl ester (ci) and sodium nitrate (sn), added by spraying method. The quality changes of packaged grapes with wrapping PE film on EPS tray were investigated for 16 days at $30{\circ}C$. The shelf-lives of C and MCci based on the weight reduction ratio of 7% were 6 days and 9 days, respectively. The reduction rate of acidity of C was higher value than those of treatments during 18 days of storage at $30{\circ}C$. The vitamin C reduction ratios of C, MCsn and MCci were 64.8, 51.5 and 49.8%, respectively, after 16 days at $30{\circ}C$. The reduction rates of firmness of C, MCsn and MCci after 16 days at $30{\circ}C$ were 44.2, 26.5, and 23,2%, respectively compared to that of initial storage grapes. The additions of ci and sn had much affected the reductions of bacteria and yeast counts especially early stage of storage. The hedonic sensory evaluation scores of MCci and MCsn had higher values than those of MC.

• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.287-292
• /
• 2010

We have investigated the effects of oxygen flow ratios on the structural, morphological, and optical properties of AlN thin films grown by using radio-frequency reactive magnetron sputtering. The AlN thin films were deposited at $300^{\circ}C$ of substrate temperature, and the reactive gas were supplied with both nitrogen and oxygen. The oxygen flow ratio was varied by controlling the amount of oxygen with respect to the total mixed gases, 0%, 10%, 15%, 20%, 25%, and 30%. The structural, morphological, and optical properties of the deposited AlN thin films were examined by using X-ray diffractometer, scanning electron microscopy, and ultraviolet-visible spectrophotometer. The AlN thin film grown at 10% of oxygen flow ratio indicated an average transmittance of 91.3% in the wavelength range of 350~1,100 nm and an optical band gap of 4.30 eV. The experimental results suggest that AlN thin films can be deposited optionally by varying the oxygen flow ratio.

• Journal of the Korean Vacuum Society
• /
• v.7 no.2
• /
• pp.141-149
• /
• 1998

The W thin films were deposited on Si3N4 by a PECVD technique. The effects of substrate temperature and gas flow ratio on the properties of the W films were investigated. The deposition of W films were limited by surface reaction at the temperature range of 150>~$250^{\circ}C$, W films had the deposition rate of 150~530 $\AA$/min and stress of 0.85~$14.35\times10 ^9 \textrm {dynes/cm}^2}$ at various substrate temperatures and $SiH_4/WF_6$ flow ratios. $SiH_4/WF_6$ flow ratio affected the deposition rate and stress of the W films, expecially, excessive flow of SiH4 abruptly changed the structure, chemical bonding, and stress of the W films. Among the deposited W films on TiN, Ti, Mo, NiCr and Al adhesion layer, the one on the Al had the best adhesion property.

• The Korean Journal of Ecology
• /
• v.10 no.4
• /
• pp.175-182
• /
• 1987

Soybeans(Glycine max Merr. cv. Kwanggyo), inoculated with Rhizobium japonicum 110 and then sand-cultured with nitrate gradients (0, 1, 3, 10 and 30mM KNO3). were studied on the growth analysis, nitrogen fixation and nitrogen economy during the growing period. The maxium values of total leaf area, biomass and nitrogen quantity were increased 139%, 122% and 161%, respectively with higher concentration of nitrate treatment. Nodulation showed significant linear correlation with leaf area growth for each treatment of nitrate concentration increased. The more nitrate concentration increased, the more distribution ratios of dry matter and nitrogen to nodule decreased, and the more T/R ratios, CGR and N content increased. On the other hand, F/C ratios and RGR showed little changes. The amounts of nitrogen fixation of soybean alloted to 0, 1, 3, 10 and 30mM nitrate treatments were 100, 46, 14, 0.1 and 0.004% for the total nitrogen assimilation, respectively. The nitrogen utility of soybean plant was smaller than that of other plants and ranged from 23 to 30 at varying nitrate gradients.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.253-258
• /
• 2006

We have fabricated vortical type organic thin film transistors (OTFTs) consisting of ITO/n type active material/Al gate/n type active material/Al using F16CuPc, NTCDA, PTCDA and PTCDI C-8. The effect of mobility of n type active materials and thin film thickness on current-voltage (I-V) characteristics and on/off ratios were investigated. The vortical type organic transistor using PTCDI C-8 exhibited low operation voltage and high on-off ratio. In addition, we have investigated the feasibility of application in organic light emitting transistor using light emitting polymer. Especially, the light emitting transistor consisting of ITO/PEDOT-PSS/P3HT/F16CuPc/Al gate/F16CuPc/Al showed the maximum quantum efficiency of 0.054.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.654-666
• /
• 2018

This study was determined the effects of dietary omega-6 and 3 fatty acid ratios (n-6/n-3, 0, 4:1, 15:1, 30:1) on lipid metabolism in obese model animal rats. Blood triacylglycerol, total cholesterol, LDL-C, glucose, ALT, AST, insulin, and leptin concentrations in n-6/n-3 group were decreased by 22.21, 20.60, 52.96, 15.71, 11.97, 9.13, 37.57, 45.98%, respectively, while HDL-C and phospholipid concentrations were increased by 28.38, 80.39% respectively, compared with control group, as especially in 4:1 group showed the greatest effect. SREPB-$1{\alpha}$ and SREPB-2 mRNA in liver tissues were down-regulated in n-6/n-3 group, but LPL-mRNA of PPARs in adipose tissue was up-regulated compared with control group. The adipocyte size in liver tissues was decreased in the order of n-6/n-3 ratio of 30:1, control, 15:1 groups, and the adipocyte size in adipose tissues was decreased in the order of n-6/n-3 ratio of control, 30:1, 15:1, 4:1 groups.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.497-500
• /
• 2008

Polystyrene foam (styrofoam) was treated with low-temperature oxygen plasma by means of immobilization and grafting techniques in order to modify its hydrophobic surface property to hydrophilic one using hydrophilic monomers of acrylic acid and acrylamide, and its surface chemical structure, morphology, and hydrophilicity were examined by ESCA, field emission scanning electron microscope (FESEM), and contactangle meter. The experimental evidences, such as the increases of O/C and N/C ratios in ESCA spectrum, thin film deposition, decrease in contact-angle, strongly suggested that the plasma treatments were useful methods for the preparation of hydrophilic surface. Contact angle diminished drastically from $84^{\circ}$ to $18{\sim}19^{\circ}$. Acrylamide, compared to acrylic acid, appeared to play a decisive role, and to be more powerful agent for improving its surface hydrophilicity.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.4
• /
• pp.595-604
• /
• 2006

The growth characteristics of Commercially Developed Nitrifying Bacteria (CDNB) were studied in laboratoryscale. CDNB, a pure, artificially isolated bacterium, was cultivated to produce Cultivated Nitrifying Bacterium Group (CNBG). The average ammonia removal rate of CDNB was 0.0234g $NH_4^+-N/g$ MLSS/hr. CNBG was produced in the batch reactor and Specific Nitrification Rate (SNR) was determined at 0.0107g $NH_4^+-N/g$ MLSS/hr. The SNR of CNBG was lower than the SNR of CDNB because the diverse and multi-cultured microbial growth took place during cultivation. The effect of the temperatures and the mixing ratios of sewage and culture solution on the SNR of CNBG was studied. The SNR of CNBG, 0.0107g $NH_4^+-N/g$ MLSS/hr at $27^{\circ}C$, decreased to 0.0048g $NH_4^+-N/g$ MLSS/hr at $15^{\circ}C$, and temperature coefficient (${\Theta}$) was calculated to be 1.07. With the varied sewage mixing ratios, the SNR of CNBG remained unchanged. Activated sludge reactors maintaining an MLSS of 2,000mg/L at HRT of 4 h were operated under conditions in which dosage of Concentrated CNBG Solution (CCNBGS, 10,000mg MLSS/L) and application method of CNBG were varied. The reactor with 20mL of CCNBGS took shorter time to oxidize $NH_4^+-N$ reaching 1mg/L than the reactor with 5mL of CCNBGS showing that higher dosages were associated with greater mass removal of $NH_4^+-N$. However, the total removal was not great. In terms of different methods of CNBG application, reactor seeded with 20mL of CCNBGS took 3days to reach 1mg/L of effluent ammonia concentration while reactor dosed with 20% (v/v) CNBG implanted media took 2days. Both the control reactor and the reactor dosed with 20% (v/v) media only did not reach 1mg $NH_4^+-N/L$ after operating 18days. The reactor with CNBG implanted media had the highest $NH_4^+-N$ removal rate because of maintaining high concentration of Nitrifying Oxidizing Bacteria (NOM), and is regarded as an appropriate method for the activated sludge process.

• Journal of Mushroom
• /
• v.20 no.2
• /
• pp.61-68
• /
• 2022

We investigated the standard cultivation substrate for Sparassis latifolia "Neowul" bred in Jeollabuk-do Agricultural Research and Extension Services. Cultivation characteristics and yield were assessed by varying the kind of sawdust and additives, and the mixing ratio. The cultivation period in larch sawdust was the shortest at 97 days. The yield was excellent (143.6 g). The findings indicated that larch is a tree species appropriate for the cultivation of S. latifolia. When the additives were varied, the yield and productivity (53.1%) were highest (116.6 g) for the wheat bran treatment. Thus, wheat bran would be an additive appropriate for culturing S. latifolia. Concerning the use of different mixing ratios, larch sawdust:beet-pulp:wheat bran ratios of 80:15:5 and 85:10:5 resulted in yields of 114.4 g and 111.4 g, and productivity of 52.5% and 51.8%, respectively. These yield and productivity values were not statistically different. Thus, the standard cultivation substrate for S. latifolia can comprise larch sawdust, beet pulp, and wheat bran at a ratio of 80:15:5 or 85:10:5. The carbon/nitrogen (C/N) ratio assumed to be appropriate for the cultivation of S. latifolia was 184-223. Pinheading would be difficult below a C/N substrate ratio of 105. Thus, the C/N ratio of the media, as well as the pH, would be vital factors affecting pinheading during S. latifolia cultivation.