• Journal of Biosystems Engineering
• /
• v.27 no.1
• /
• pp.45-50
• /
• 2002

This study was performed to develop thin layer drying equations fur short grain rough rice using far-infrared ray. Thin layer drying tests was conducted at four far-infrared ray temperature levels of 30, 40, 50, 60$^{\circ}C$ and two initial moisture content levels of 20.7, 26.2%(w.b.). The measured moisture ratios were fitted to Lewis and Page drying models by stepwise multiple regression analysis. Half response time of drying was affected by both drying temperature and initial moisture content at drying temperature of below 40$^{\circ}C$, but at above 40$^{\circ}C$ was mainly affected by drying temperature. Experimental constant(k) in Lewis model was a function of drying temperature, but K and N in Page model were function of drying temperature and initial moisture content. Moisture ratios predicted by two drying models agreed well with experimental values. But in the actual range of drying temperature above 30$^{\circ}C$ Page model was more suitable for predicting of drying rates.

• Journal of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.257-260
• /
• 2005

We have mapped the W 3 giant molecular cloud in the $C^o\;^3P_1-^3 P_o$ ([CI]) line with the Mount Fuji Submillimeter-wave Telescope. The [CI] emission is extended over the molecular cloud, having peaks at three star forming clouds; W 3(Main), W 3(OH), and AFGL 333. The [CI] emission is found to be strong in the AFGL 333 cloud. We have also observed the $C^{18}O,\;CCS,\;N_2H^+$, and $H^{13}CO^+$ lines by using the Nobeyama Radio Observatory 45 m telescope. In the AFGL 333 cloud, we find two massive cores, which are highly gravitationally bound and have no sign of active star formation. The high [$C^o$]/[CO] and [CCS]/[$N_2H^+$] abundance ratios suggest that the AFGL 333 cloud is younger than the W 3(Main) and W 3(OH) clouds.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.9
• /
• pp.604-608
• /
• 2014

This study investigated influence of dissolved organic nitrogen (DON) in natural organic matter (NOM) on the formation of organic chloramines upon monochloramination. Ratios of dissolved organic carbon (DOC) to DON of the 16 NOM isolates ranged from 7 to 47 mg-C/mg-N. Levels of organic chloramines maxed in 24 hours at $0.16mg-Cl_2/mg-N$ in average. The yields were relatively lower, but decay of organic chloramines were slower than those upon chlorination. Organic chloramines formed upon monochloramination decreased by 56% in average in 120 h. NOM with lower DOC/DON ratios formed more organic chloramines. NOM fractions such as hydrophobic, hydrophilic, transphilic, and colloidal did not significantly impact formation of organic chloramines. As the monochloramine doses increased, more organic chloramines were produced ($R^2=0.91$). Overestimation of disinfection capacity due to the formation of organic chloramines may not be concerns for monochloramine systems since only 6% of monochloramine could be converted to organic chloramines upon monochloramination of NOM.

• Journal of Korean Society on Water Environment
• /
• v.36 no.2
• /
• pp.116-124
• /
• 2020

This study aims to identify the characteristics of organic matter and pollutant sources using water quality and stable isotope ratios (δ¹⁵N, δ¹³C) of the two inflow tributaries (Gulpo (GP) and Anyang (AY) streams). Water samples were analyzed in June and September 2018, and the results showed that the concentrations of nutrients, such as TN and NO₃-N, were increased at GP4, which is located at the downstream of sewage treatment facilities(STFs). TOC and TN ratios showed a strong positive correlation (R² = 0.77, p<0.01) at all points except for GP4. The results of GP's stable isotope ratio analysis do not appear to be a constant cluster compared to AY because GPs with large amounts of pollutants from the industry (metal processing companies, etc.) have less tributary, shorter waterway and significantly different external sources. This could be attributed to different sources of external inflow despite its smaller number of tributaries and shorter waterways than AY. In the first half of the year, the δ¹⁵5N of GP4 was affected by discharge of STFs, while AY3 seemed to have an influence of tributary than the discharge of STFs. Consequently, using water quality, stable isotope ratio and C/N, the sources of contamination in two streams with different contaminants were identified and origin was estimated.

• 한국해양학회지
• /
• v.29 no.2
• /
• pp.107-118
• /
• 1994

An investigation of the annual change and C:N:P ratio in particulate organic matter (POM) in Chinhae Bay, a semi-enclosed bay of the southern coast of Korean Peninsula, was carried out for a period of 12 months between January and December, 1993. The concentrations of POM have a broad range: 198∼4,416 ugC/l, 24∼792 ugN/l and 4.5∼69.0 ugP/l, Marked seasonal changes of POM, particularly particulate organic carbon (POC) and nitrogen (PON), were observed in the surface water. Generally, the concentration of POM peaks in summer. The C:N:P composition ratio of particulate organic matter, which is high in summer, also shows a seasonal change. The C:N assimilation ratio is constant at 6.53, which is consistent with the Redfield ratio. The significant linear relationship between POM and chlorophyll-a in the surface water during the survey period (except for January and February) and the C:N ratio suggest that the concentration of POM is controlled by phytoplankton biomass. POM peaks in summer, a period characterized by high freshwater input and the strong stratification, as a result of the intense proliferation of phytoplankton by a large amount of nutrient loading from the tributaries. On the other hand, the high C:P and N:P ratios in summer indicate that P is limited for phytoplankton growth owing to N-enrichment from a high input of freshwater with a high dissolved inorganic N:P ratio.

• Nutrition Research and Practice
• /
• v.15 no.3
• /
• pp.367-381
• /
• 2021

BACKGROUND/OBJECTIVES: This study aimed to establish a mother and child cohort in the Chinese population, and investigate human breastmilk (HBM) composition and its relationship with maternal body mass index (BMI) and infant growth during the first 3 mon of life. SUBJECTS/METHODS: A total of 101 Chinese mother and infant pairs were included in this prospective cohort. Alterations in the milk macronutrients of Chinese mothers at 1 mon (T1), 2 mon (T2), and 3 mon (T3) lactation were analyzed. HBM fatty acid (FA) profiles were measured by gas chromatography (GC), and HBM proteomic profiling was achieved by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry (MS). RESULTS: During the first 3 mon of lactation (P < 0.05), significant decreases were determined in the levels of total energy, fat, protein, and osteopontin (OPN), as well as ratios of long-chain saturated FA (including C16:0, C22:0 and C24:0), monounsaturated FA (including C16:1), and n-6 poly unsaturated FA (PUFA) (including C20:3n-6 and C20:4n-6, and n-6/n-3). Conversely, butyrate, C6:0 and n-3 PUFA C18:3n-3 (α-linolenic acid, ALA) were significantly increased during the first 3 mon (P < 0.05). HBM proteomic analyses distinguished compositional protein differences over time (P = 0.001). Personalized motherinfant analyses demonstrated that HBM from high BMI mothers presented increased total energy, fat, protein and OPN, and increased content of n-6 PUFA (including C18:3n-6, C20:3n-6 and n-6/n-3 ratio) as compared with low BMI mothers (P < 0.05). Furthermore, BMI of the mothers positively correlated with the head circumference (HC) of infants as well as the specific n-6 PUFA C20:3n-6 over the 3 time points examined. Infant HC was negatively associated with C18:0. CONCLUSION: This study provides additional evidence to the Chinese HBM database, and further knowledge of FA function. It also helps to establish future maternal strategies that support the healthy growth and development of Chinese infants.

• KSBB Journal
• /
• v.18 no.6
• /
• pp.529-535
• /
• 2003

We studied degradation effects of hydrophobic substrate such as kerosene and diesel by adding a biosurfactant originated from Pseudomonas aeruginosa F722 and chemical surfactants (Tween 80 and detergent) with aeration. The surface tensions of the biosurfactant, Tween 80 and detergent were 30mN/m, 39mN/m and 31mN/m, respectively. When the concentration of biosurfactant added in C-medium was 0.01 and 0.15%(w/v), the ratios of hydrocarbon degradation were 94.3％ and 94.2% respectively. It was 6.2%(w/v) higher than when the concentrations of added biosurfactant were 0.05, 0.1 and 0.2％. The degradation ratios of the chemical surfactants (Tween 80 and detergent) were 94.5％ and 93.5％ respectively. The effects of the biosurfactant and chemical surfactants were similar on the degradation ratio in mixtures of kerosene and diesel. However, the population of viable p. aeruginosa F722 at the end of the cultivation period was twice as higher in the biosurfactant than that in the chemical surfactant. We also studied the effect of aeration (0.5vvm) on the degradation ratio. The biosurfactant addition experiment was conducted with 0.5vvm air, 35$^{\circ}C$, 150rpm, pH 8.0, 3days, 1.0% (w/v) substrate. When p. aeruginosa F722 and 0.15%(w/v) biosurfactant were added, the degradation ratio of hydrocarbon was 94.8％. Without p. aeruginosa F722, it was 68%. Thus, with aeration, the degradation ratio of hydrocarbon was increased by 26.8％. In addition, the cultivation time was shortened by 1/3. The degradation ratios of hydrocarbon in shaking culture (cultivation time; 3days) and stationary culture (cultivation time; 10days) were 94.8 and 93.7％ respectively. Thus, the addition of biosurfactant and aeration enhanced the degradation of hydrocarbon originated kerosene and diesel.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.144.1-144.1
• /
• 2016

We fabricate organic single crystal nanowire heterojunction p-n diode poly(3-hexylthiophene)(P3HT) and from Phenyl-C61-butyric acid methyl ester(PCBM) using by liquid-bridge mediated nanotransfer molding(LB-nTM) method. LB-nTM has been reported an one step direct printing method for making well-aligned nanowire arrays. Moreover, multi-patterning nanostructures can be fabricated with the consecutive printing process. As a result, it is possible to make simple and basic concept of heterojunction devices such as lateral organic p-n nanojunction diode. P3HT/PCBM nanowires heterojunction diode has rectifying behavior with on/off ratios of ~20.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.spc1
• /
• pp.110-122
• /
• 1996

The n-3 family fatty acids containing ${\alpha}$-linolenic acid(18:3, ALA) have been known as physiological activation materials such as inhibitory effects on the incidence of hyper-tension, coronary heart disease and cancers as well as the control of senilc dementia. Although a lot of ALA(about $63\%$) are contained in perilla oil, it has not been commercialized yet because the purification technique of the ALA has not been well established. The procedure of purification of ALA from perilla oil was saponified with 1 N-KOH /ethanol and then saturated and low level unsaturated fatty acids were removed by low-temperature crystallization method. The concentrated unsaturated fatty acids (containing about $75\%$ ALA) went down through the silver nitrate-impregnated silica column chromatography for separation of high purity of ALA. The results obtained we Fraction B, C and D contained ALA more than $85.5\%$(recovery, >$88.9\%,\;95.4\%$(recovery, >$54.4\%$) and $99.9\%$(recovery, >$31.5\%$) in purity, respectively. Seed oil content of the tested varieties were ranged from 34.8 to $54.1\%$ with $45.3\%$ of varietal means. The major omega fatty acids contained in the oil were oleic acid(n-9) $15.2\%$, linoleic acid(n-6) $13.9\%$ and linolenic acid(n-3) $63.1\%$ in the mean value. Varietal variation of n-9, 6 and 3 fatty acids ranged of $9.5\~21.4\%,\;9.1\~20.4\%$ and $50.6\~70.5\%$ respectively. Unsaturated fatty acid were averaged $92.2\%$ of seed oil in fatty acid composition. The ratios of n-6 to n-3 ranged of $0.13\~0.34\%$($0.22\%$ in mean value). The highest n-3 fatty acid variety was Yecheonjong being $70.5\%$. The lowest variety in ratios of n-6 to n-3 was Goseongjong being $0.13\%$. Oil content showed positive correlation with stearic acid and linolenic acid, while the negative correlation with oil content and linoleic acid. On the other hand, A significant negative correlation were showed between linolnic acid and the ratios n-6/n-3 fatty acid, saturated fatty acid. Saturated fatty acid was highly correlated with unsaturated fatty acid negatively being $r= -0.723^{**}$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.211-211
• /
• 1999

Titanium nitride (TiN) thin films have useful properties including high hardness, good electrical conductivity, high melting point, and chemical inertness. The applications have included wear-resistant hard coatings on machine tools and bearings, decorative coating making use of the golden color, thermal control coatings for widows, and erosion resistant coatings for spacecraft plasma probes. For all these applications as feature sizes shrink and aspect ratios grow, the issue of good step coverage becomes increasingly important. It is therefore essential to manufacture conformal coatings of TiN. The growth of TiN thin films by chemical vapor deposition (CVD) is of great interest for achieving conformal deposition. The most widely used precursor for TiN is TiCl4 and NH3. However, chlorine impurity in the as-grown films and relatively high deposition temperature (>$600^{\circ}C$) are considered major drawbacks from actual device fabrication. To overcome these problems, recently, MOCVD processes including plasma assisted have been suggested. In this study, therefore, we have doposited Ti(C, N) thin films on Si(100) and D2 steel substrates in the temperature range of 150-30$0^{\circ}C$ using tetrakis diethylamido titanium (TDEAT) and titanium isopropoxide (TIP) by pulsed DC plamsa enhanced metal-organic chemical vapor deposition (PEMOCVD) method. Polycrystalline Ti(C, N) thin films were successfully grown on either D2 steel or Si(100) surfaces at temperature as low as 15$0^{\circ}C$. Compositions of the as-grown films were determined with XPS and RBS. From XPS analysis, thin films of Ti(C, N) with low oxygen concentration were obtained. RBS data were also confirmed the changes of stoichiometry and microhardness of our films. Radical formation and ionization behaviors in plasma are analyzed by optical emission spectroscopy (OES) at various pulsed bias and gases conditions. H2 and He+H2 gases are used as carrier gases to compare plasma parameter and the effect of N2 and NH3 gases as reactive gas is also evaluated in reduction of C content of the films. In this study, we fond that He and H2 mixture gas is very effective in enhancing ionization of radicals, especially N resulting is high hardness. The higher hardness of film is obtained to be ca. 1700 HK 0.01 but it depends on gas species and bias voltage. The proper process is evident for H and N2 gas atmosphere and bias voltage of 600V. However, NH3 gas highly reduces formation of CN radical, thereby decreasing C content of Ti(C, N) thin films in a great deal. Compared to PVD TiN films, the Ti(C, N) film grown by PEMOCVD has very good conformability; the step coverage exceeds 85% with an aspect ratio of more than 3.