• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.926-932
• /
• 2004

This study deals with the statistical analyses on the relationship between the red tide formation and the meteorological factors in the Korean coastal waters. From 1995 to 2002, the red tide was observed every year and the number of occurrences increased as well. The red tide mostly occurred in July, August, September and October. from multiple linear regression, the meteorological factors governing the mechanisms of the increase in the number of red tide occurrences are found to be a water temperature, rainfall, sunshine duration and wind velocity. But water temperature as the limited factor controlling the growth of phytoplankton (Cochlodinium polykrikoids) in 15∼$30^{\circ}c$. NO ＝ 8.089 - 0.319WT + 0.019RF + 0.141SD + 0.l19WV (R ＝ 0.897) in August NO = 7.531 - 0.327WT + 0.027RF + 0.208SD + 0.208WV (R ＝ 0.894) in September Here, NO is the number of occurrence for red tide, WT is water temperature, RF is rainfall, SD is sunshine duration and WV is wind velocity, respectively. The necessary times till the day of red tide occurrence verse the day when water temperature reaches $15^{\circ}c$ are 78∼104 days, then it should be divided the coastal waters into 4 areas by the comparison among the accumulated sunshine duration, water temperature and rainfall as follows； the South West Coast (SW), South Middle Coast (SM), South East Coast(SE) and East South Coast (ES). The coastal areas that red tide occurs were complicated and various by change of marine environments. Usually red tide with a high concentrations (individual number, cells/ml) appeared in SM and SE. It was found that the general situations for the frequencies of red tide formation are mainly concentrated to 24.5∼$25^{\circ}c$ (high water temperature) and eve. 1000 cells/ml (high individual number) such as the category of red tide warning.

• Analytical Science and Technology
• /
• v.18 no.4
• /
• pp.329-337
• /
• 2005

TL dating using pre-dose effect is concerned with the sensitivity increase of $110^{\circ}C$ TL peak in quartz following the pre-exposure of irradiation (pre-dose) in antiquity and heating to thermal activation temperature. Using the multiple activation (MA) method for determining an equivalent dose, the activation temperature was selected to $500^{\circ}C$ and the region of interest was selected from $85^{\circ}C$ to $105^{\circ}C$ on quartz sample from archaeological remains, roof-tile kiln. which was excavated at Chudong-Ri cultural site. It was concluded that the resultant date was determined to the age of $1725{\pm}25years$ AD (l ${\sigma}$ SD), which had more improved precision considering with e radiocarbon dates and was in good agreement with the age derived by archaeological assessment. Also it was concluded that the pre-dose dating should contribute significantly to future archaeological dating work in the range of the last 2000 years.

• Journal of Surface Science and Engineering
• /
• v.36 no.5
• /
• pp.357-363
• /
• 2003

The aim of this work is the synthesis of a-C:H films from methane gas using surface spark discharge at the atmospheric pressure. Properties of these films have been investigated as functions of energy W delivered per a methane molecule in the discharge. The method enables the coatings to be deposited with high growth rates (up to $100 \mu\textrm{m}$/hour) onto large-area substrates. It is shown that the films consist of spherical granules with diameter of 20∼50 nm formed in the spark channel and then deposited onto the substrate. The best film characteristics such as minimum hydrogen-to-carbon atoms ratio H/C=0.69, maximum hardness $H_{v}$ =3 ㎬, the most dense packing of the granules and highest scratch resistance has been obtained under the condition of highest energy W of 40 eV. The deposited a-C:H coatings were found to be more soft and hydrogenated compared to the diamond-like hydrogenated (a-C:H) films which obtained by traditional plasmaenhanced chemical vapor deposition methods at low pressure (＜10 Torr). Nevertheless, these coatings can be potentially used for scratch protection of soft plastic materials since they are of an order harder than plastics but still transparent (the absorption coefficient is about $10^4$∼$10^{5}$ $m^{-1}$ At the same time the proposed method for fast deposition of a-C:H films makes this process less expensive compared to the conventional techniques. This advantage can widen the application field of. these films substantially.y.

• Food Science of Animal Resources
• /
• v.38 no.5
• /
• pp.1008-1018
• /
• 2018

Although bacteriocins with anti-listerial activity have been isolated from a wide variety of lactic acid bacteria, little is known about those from Leuconostoc lactis, a heterofermentative bacterium that produces diacetyl and exopolysaccharides in dairy foods. In this study, an anti-listerial bacteriocin was isolated from Leuc. lactis SD501 and characterized. It was particularly potent against Listeria monocytogenes and also inhibited Enterococcus faecalis. Anti-listerial activity reached a maximum during the early stationary phase and then decreased gradually. The anti-listerial substance was sensitive to proteinase K and ${\alpha}$-chymotrypsin, confirming its proteinaceous nature. Its activity remained stable at pH values ranging from 1 to 10. In addition, it was strongly resistant to high temperatures, retaining its activity even after incubation for 15 min at $121^{\circ}C$. The apparent molecular mass of the partially purified anti-listerial bacteriocin was approximately 7 kDa. The characteristics of the SD501 bacteriocin, including its small molecular size (<10 kDa), strong anti-listerial activity, wide pH stability and good thermostability, indicate its classification as a Class IIa bacteriocin.

• Toxicological Research
• /
• v.17 no.4
• /
• pp.297-301
• /
• 2001

The acute toxicity of CJ-50005, an inactivated whole virus vaccine derived from hepatitis A virus (HM175) grown in human MRC-5 diploid fibroblast culture, was tested in Sprague Dawley (SD) rats and beagle dogs. CJ-50005 was orally and intramuscularly administered up to the maximum dose of 81$\mu\textrm{g}$/kg. as much as 3,000 times of the expected clinical dose, in SD rats and was intramuscularly administered up to 27 $\mu\textrm{g}$/kg, as much as 1,000 times of the expected clinical dose, in beagle dogs. In these experiments, there were no death and clinical changes which were related to CJ-50005 administration. In addition, there were no significant changes between control and treated groups in body weights and autopsy findings. In conclusion, the administration of CJ-50005 over 81$\mu\textrm{g}$/kg in SD rats and over 27$\mu\textrm{g}$/kg in beagle dogs was proved to be safe, and it is thought that CJ-50005 may not show any toxicity in its clinical use.

• Biomolecules & Therapeutics
• /
• v.5 no.4
• /
• pp.380-383
• /
• 1997

CJ-50001 is a recombinant granulocyte-colony stimulating factor (rG-CSF) developed by Cheil Jedang R&D Center. The effects of CJ-50001 on the increase of peripheral neutrophil count following intravenous and subcutaneous single administration at a dose of 20$\mu$g/kg in normal ICR mice and SD rats, respectively, were compared with those of Grasin, a control drug. Both CJ-50001 and Grasin significantly increased the peripheral neutrophil number in four treatment groups and the maximum number of neutrophil was achieved at 12 to 18 h in rats and mice, respectively. The dose dependency test was studied for CJ-50001 only in normal mice by intravenous or subcutaneous administration. When administered i.v or s.c at the various doses in normal mice, CJ-50001 significantly increased the neutrophil number over the dose of 160 ng/kg, compared with the vehicle control group. From these results, it was concluded that CJ-50001 showed efficacy similar to Grasin in the peripheral neutrophil count increase.

• Journal of Pharmaceutical Investigation
• /
• v.3 no.4
• /
• pp.28-38
• /
• 1973

The mechanism of urinary excretion of sulfadiazine was investigated in the dogs by means of stop-flow technique Results of experiments were summarized as follows; 1. The ratios of U/P sulfadiazine to U/P creatinine $(U/P_{SD}:U/P_{cr})$ were always lower than 1 in all nephrons, showed a minimum in the proximal area. 2. $U/P_{SD}:U/P_{cr}$ were not affected by Probenecid or 2.4-DNP, whereas increased significantly by administration of sodium bicarbonate. 3. Probenecid did not alter the stop-flow patterns in alkalotic dog too. 4. $C_{SD}$ (clearance of sulfadiazine ) was appreciably influenced by change in urinary PH, or flow rate. All evidences lead to the conclusion that sulfadiazine reabsorption is passively transported by proximal tubules. No clue for active process, either secretory or reabsorptive, was obtained.

• Korean Journal of Food Science and Technology
• /
• v.38 no.4
• /
• pp.513-520
• /
• 2006

Spray-dried (SD) and freeze-dried (FD) takju powders were stored at 5, 15 and $25^{\circ}C$, and various quality characteristics such as moisture, amino nitrogen, color value, total viable cell count, total sugar, reducing sugar organic acid, and flavor compounds were measured for 50 days at 10-day intervals. After 50 days of storage, the moisture content was increased from an initial 6.64% to 7.24-7.38% in the SD powder, and from an initial 4.86 to 5.43-5.61% in the FD powder. pH, total acid content and total viable cell counts were slightly increased. Organic acid content was decreased in the SD powder from an initial 3,949.9 mg% to 805.9-922.3 mg%, and in the FD powder from an initial 5,171.5 mg% to 3,646.0-4,110.2 mg%. Amino nitrogen content was increased in the SD powder from an initial 1.2% to 1.9-2.2% and in the FD powder from an initial 1.9% to 2.2-2.5%. Total sugar and reducing sugar contents were increased in the SD powder from an initial 17.2% and 4.0% to 25.9-27.3% and 5.8-6.9%, and in the FD powder from an initial 19.1% and 5.2% to 29.2-30.2% and 8.3-8.8%, respectively. With increasing storage time, L and b values in the SD powder increased slowly, while L value in the FD powder tended to decrease and b value tended to increase. About 20 major volatile flavor components were identified in the SD and FD powders by GC-MS and all such component levels were decreased with increasing storage time.

• Food Science and Biotechnology
• /
• v.14 no.4
• /
• pp.461-465
• /
• 2005

To determine the cause of wet noodle spoilage, microorganisms isolated from wet noodles were identified and characterized. In addition, the growth inhibitory effects of organic acid mixture (OA: lactic acid 27.8%, acetic acid 12.0%, succinic acid 1.0%) and sodium dehydroacetate (SD) on the isolated strain were estimated in nutrient broth medium. The isolated strain was Gram-positive, rod shaped, motile, and spore forming. Based on physiological characteristics and the API 50 CHB-kit test results for the assimilation of 49 carbohydrates, the isolated strain was identified as Bacillus amyloliquefaciens (92.6%), which is able to degrade starch. Decimal reduction times (D-values) at 100, 105, and $110^{\circ}C$ for spores of B. amyloliquefaciens were 8.5, 5.1, and 2.5 min, respectively, and the z-value was $12.8^{\circ}C$. We estimated that B. amylo-liquefaciens isolated from spoiled wet noodles was a thermophilic species having high heat-resistance. Viable cell numbers in wet noodles and broth medium inoculated with B. amyloliquefaciens were decreased by 2-4 log cycles by combined treatment with 0.03 or 0.05% OA and 0.3% SD. These results revealed that OA combined with SD could be used as a potential agent to inhibit B. amyloliquefaciens in wet noodles.

• Journal of Crop Science and Biotechnology
• /
• v.10 no.3
• /
• pp.185-192
• /
• 2007

Near-infrared spectroscopy(NIRS) was used to develop a rapid and efficient method to determine lignan glucosides in intact seeds of sesame(Sesamum indicum L.) germplasm accessions in Korea. A total of 93 samples(about 2 g of intact seeds) were scanned in the reflectance mode of a scanning monochromator, and the reference values for lignan glucosides contents were measured by high performance liquid chromatography. Calibration equations for sesaminol triglucoside, sesaminol($1{\rightarrow}2$) diglucoside, sesamolinol diglucoside, sesaminol($1{\rightarrow}6$) diglucoside, and total amount of lignan glucosides were developed using modified partial least square regression with internal cross validation(n=63), which exhibited lower SECV(standard errors of cross-validation), higher $R^2$(coefficient of determination in calibration), and higher 1-VR(ratio of unexplained variance divided by variance) values. Prediction of an external validation set(n=30) showed a significant correlation between reference values and NIRS estimated values based on the SEP(standard error of prediction), $r^2$(coefficient of determination in prediction), and the ratio of standard deviation(SD) of reference data to SEP, as factors used to evaluate the accuracy of equations. The models for each glucoside content had relatively higher values of SD/SEP(C) and $r^2$(more than 2.0 and 0.80, respectively), thereby characterizing those equations as having good quantitative information, while those of sesaminol($1{\rightarrow}2$) diglucoside showing a minor quantity had the lowest SD/SEP(C) and $r^2$ values(1.7 and 0.74, respectively), indicating a poor correlation between reference values and NIRS estimated values. The results indicated that NIRS could be used to rapidly determine lignan glucosides content in sesame seeds in the breeding programs for high quality sesame varieties.