• 소성∙가공
• /
• 제22권8호
• /
• pp.486-491
• /
• 2013

A numerical investigation of the butting process for an AZ31B magnesium alloy tube at elevated temperatures was conducted to develop a double-butted magnesium alloy tube. As a result of the current study, it was found that the amount of doming of the tube end, prior ironing-extrusion to obtain high wall thickness reduction are important factors for the butting process of magnesium alloy tubes. There is also a limitation of the thickness profile of butted tube due to buckling of tube wall during the stripping stage.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1581-1584
• /
• 2008

버팅 콘택을 가진 쌍극 폴리사이드 게이트 구조에서 폴리실리콘 내의 순 도핑(net doping) 농도는 $n^+/p^+$ 중첩 및 실리사이드/폴리실리콘 층에서 도펀트의 수평 확산에 기인하여 감소하였다. 버팅 콘택 영역에서의 쇼트키 다이오드 형성은 $CoSi_2$의 열적 응집 현상에 의한 $CoSi_2$ 손실과 폴리실리콘 내의 농도 저하에 기인된다. DDI DRAM에서 기생 쇼트키 다이오드는 감지 증폭기의 노이즈 마진을 감소시켜 column성 불량을 일으킨다. Column성 불량은 $n^+/p^+$ 폴리실리콘 접합 부분을 물리적으로 분리시키거나, $CoSi_2$ 형성 전 질소 이온을 $p^+$ 영역에 주입 시켜 $CoSi_2$의 응집현상을 억제함으로써 줄일 수 있다.

• 한국산학기술학회논문지
• /
• 제11권2호
• /
• pp.485-490
• /
• 2010

본 논문에서는 버팅 콘택(butting contact) 구조를 갖는 DDI DRAM소자의 감지 증폭기의 입력 게이트 단의 모든 기생 성분을 포함한 등가 회로를 제안 하였다. 제안한 모델을 이용하여 기생 쇼트키 다이오드가 감지 증폭기 동작에 어떤 영향을 미치는지 분석하였다. 각각의 불량 가능성에 대해 감지 증폭기가 어떻게 동작하는지 분석하여 단측 불량 특성의 원인을 규명하였다. DDI DRAM에서 단측 불량 원인과 불량률의 온도 의존성은 감지 증폭기의 입력 게이트 단에 형성된 기생 쇼트키 다이오드 형성에 기인한 것으로 판단된다. 이러한 기생 쇼트키 다이오드는 게이트 입력에 기생 전압 강하를 야기하게 되고 결국 감지 증폭기의 노이즈 마진을 감소시켜 단측 불량률을 증가시킨다.

• 한국가축번식학회지
• /
• 제9권2호
• /
• pp.140-147
• /
• 1985

Seventy four Holstein heifers were randomly assigned over three trials to PRID-7+PG-6 and Synchromate B-9 regimens to synchronize estrus cycle for embryo transfer. Sexual behaviors; moounting, standing, orientation, chin-resting, sniffing, licking, rubbing and butting, vaginal swelling and mucus discharge were observed between 06-08, 12-14 and 18-20 h on 1st day and 00-02, 06-08, 12-14 and 18-20 h on 2nd day after removal of hormones. Synchromate-B treatment (81.6%) showed higher synchronized estrus rate than PRID treatment (77.8%) during observation period. Standing estrus was observed within 74 h after PG injection in PRID and within 52 h after removal of implant in Synchromate-B. About 68% of heifers in PRID and 74% of heifers in Synchromate-B showed standing estrus between 0-14 h on 2nd day after removal of the hormones. Synchromate-B resulted in a tighter synchrony of standing estrus than PRID. Incidence of average mounting and standing per head during observation period was 22.3 and 16.6 in PRID and 28.1 and 13.6 in Synchromate-B. The PRID showed peak in active mounting at 18-20 h on 1st day, however, the Synchromate-B showed at 0-2 h on 2nd day after removal of hormone. Active standing was shown between 18 h on 1st day to 20h on 2nd day in PRID, however, between 0-14 h on 2nd day after removal of hormone is Synchromate-B. There was slight difference in pattern of active mounting and standing during estrus between PRID and Synchromate-B. Conception rate of synchronized heifers transferred with fresh and frozen embryos by non-surgical and surgical methods was higher in synchromate-B (62.5%) than in PRID (38.5%). Chin-resting showed highest incidence among 6 sexual behavioral components in the both treatments. Synchromate-B showed higher incidence of chin-resting (16.6) than PRID (10.7). Synchromate-B group showed also higher incidence of orientation, sniffing and butting than PRID group. Synchromate-B resulted in more active sexual behaviors than PRID. The pattern of incidence of chin-resting, licking and butting was almost symmetrical in PRID with their peak values at 6-8 h on 2nd day, however in Synchromate-B chin-resting and sniffing was symmetrical with their peak values at 12-14 h on 2nd day after removal of hormone. There was tendency to increase vaginal swelling according to time passage of synchronized estrus in the both treatments. Incidence of mucus discharge in Synchromate-B was slightly higher than in PRID. Twenty to 40% was false negative in conception rate by tall painting before re-estrus day as judged by rectal palpation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.361-364
• /
• 1995

Wavelet Transform is a new tools for signal processing, such as data compressing extraction of parameter for Reconition and Diagnostics. This transform has an advandage of a good resolution compared to Fast Fourier Transform (FFT) In this study, we employ the wavelet transform for analysis of Acoustic Emission raw signal generated form rotary compressor. In abnormal condition of rotary compressor, the state of operating condition can be classified by analizing coefficient of wavelet transformed signal.

• 한국어류학회지
• /
• 제18권3호
• /
• pp.193-201
• /
• 2006

한강 지류인 가정천과 원주천에 서식하는 Z. platypus의 생식생태에 관하여 연구하였다. 이차성징으로 수컷의 머리부위와 뒷지느러미, 미병부에 추성이 형성되었고 혼인색의 변화가 뚜렷하였으며, 산란기 체형변화로 암수에서 모두 뒷지느러미 길이가 길어지고, 체고도 높아졌다. Z. platypus 수컷의 세력권 싸움의 형태는 머리싸움(head butting), 회전싸움(rotated fighting), 평행하게 헤엄치면서 싸우기(parallel swimming), 물어뜯기(biting), 축출하기(expelling) 등이었다. Z. platypus는 전반적으로 유속이 느리고, 수심이 얕은 모래 바닥에 산란이 임박한 암컷의 상부에 위치하다가 옆으로 내려와 나란히 자세를 취한 뒤 뒷지느러미로 모래를 파헤치면서 산란 하였고, 별도의 난 보호행동은 하지 않았다. 산란 간격과 지속시간은 산란장의 개체 밀도와 관련이 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.365-368
• /
• 1995

Rotary Compressor has many AE(Acoustic Emission) sources according to condition of parts because it is operated with combination of various parts. In this study, analysis of AE raw signal generated form Rotary compressor which artificially-made parts inflicted abnormal condition was carried out. AE raw signals were acquired form high-speed A/D board, and many burst type signals were observed. By analyzing burst type signals which is caused form internal AE source,efficient AE parameters for monitoring and diagnosis were presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1463-1466
• /
• 1987

The problem of generating minimal area CMOS functional cell layout can be converted to that of decomposing the transistor connection graph into a minimum number of subgraphs, each having a pair of Euler paths with the same sequence of input labels on the N-graph and P-graph, which are portions of the graph corresponding to NMOS and PMOS parts respectively. This paper proposes a heuristic algorithm which yields a nearly minimal number of Euler paths from the path representation formula which represents the give a logic function. Subpath merging is done through a list processing scheme where the pair of paths which results in the lowest cost is successively merged from all candidate merge pairs until no further path merging and further reduction of number of subgraphs are possible. Two examples were shown where we were able to further reduce the number of interlaces, i.e., the number of non-butting diffusion islands, from 3 to 2, and from 2 to 1, compared to the earlier work [1].

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.328-332
• /
• 1996

The compressor is one of important elements in refrigerator cycle and play an important role of refrigeration efficiency and quality. Therefore it is very important to monitor state of normal and abnormal compressor. In this research, technic of AE is used for monitoring abnormal rotary compressor and an AE parameter which is a most proper parameter to monitor the abnormal state of compressor is determined by signal processing, Finally, the monitoring result of rotary compressor is agreement with the result of life test.

• 한국수정란이식학회지
• /
• 제26권2호
• /
• pp.141-145
• /
• 2011

Seven male Himalayan tahrs were strongly assumed to have accidently fed on foreign bodies in 2007. At the time, zoo caretakers witnessed missing fence padding, such as carpet, plastic awning, and ropes. The incident occurred the morning after the items had been set up to protect indigenous, wild long-tailed gorals from self injury caused by head butting the steel fence. Adult male Himalayan tahrs were obviously suspected of mostly eating the paddings mainly composed of carpet, thin and long plastic awning, and ropes. Even though they had not shown digestive problems, surgery was determined necessary in order to remove any indigestible foreign bodies. Left flank rumenotomy was conducted on seven male Himalayan tahrs from April to May, 2011. After anesthesia with xylazine, rumenotomy was performed on a concrete floor, with legs and head secured by ropes. No access to water and hay prior to operation for two days was needed to make the surgical procedure done quickly. Two sheets of small hand towels protecting against inflow of ruminal contents were beneficial during surgery. Antibiotics were administered intramuscularly for seven days. No abscesses at the surgical site were found after surgery. Like domestic ruminants, wild ruminants also ingest metalic or non-metalic, indigestible foreign bodies by accident. Therefore, simplified rumenotomy must be developed to apply to those wild animals to lengthen their longevity and to advance the quality of life in captivity. This case report is the first showing how to perform rumenotomy of Himalayan tahr, a wild ruminant, in Korea.