• 제목/요약/키워드: Bus driver

검색결과 96건 처리시간 0.028초

일부지역 버스운전기사의 수면의 질이 작업능력에 미치는 영향 (The Effects of Sleep Quality on the Work Ability for Bus driver)

  • 김형민;김동현
    • 대한지역사회작업치료학회지
    • /
    • 제7권3호
    • /
    • pp.35-42
    • /
    • 2017
  • 목적 : 본 연구는 일부지역 버스운전기사의 일반적 특성과 수면의 질 그리고 작업 능력 간의 상관성을 파악하고, 작업능력에 미치는 영향을 확인하고자 하였다. 연구방법 : 버스운전기사 120명을 대상으로 작업 능력의 측정을 위해 작업 능력 지수(Work Ability Index : WAI)를 사용하였고, 수면의 질은 수면의 질 평가(Pittsburgh Sleep Quality Index : PSQI)를 통해 평가하였다. 작업능력과 수면의 질과의 상관관계를 확인하기 위하여 피어슨 상관분석(Pearson's correlation coefficient)를 이용하였고, 수면의 질이 작업능력에 미치는 영향을 확인하기 위해 단계적 다중 회귀분석(Stepwise regression analysis)을 통해 분석하였다. 결과 : 작업능력에 영향을 미치는 변인들의 상관관계를 분석 한 결과 수면의 질(p<.001)과 근로시간(p<.001) 에서 부적인 상관관계가 나타났다. 최종적으로 수면의 질(p<.001)과 근로시간(p<.01)이 버스운전기사들의 작업능력에 통계적으로 유의한 영향을 미치는 변인으로 분석되었고, 수정된 결정계수 값($R^2$)이 0.482로 48.2%의 설명력을 보였다. 결론 : 버스운전기사들의 수면의 질과 근로시간이 작업능력에 영향을 미치는 주요 변인으로 파악되었다. 그러므로 버스운전기사의 작업능력을 향상시키기 위한 방안으로 수면의 질과 근로시간을 고려하여야 하겠다.

자동차 네트워크 시스템을 위한 FlexRay 드라이버 개발 (The Development of FlexRay Driver for Vehicle Network System)

  • 구용제;김종철;신충엽;박상종
    • 제어로봇시스템학회논문지
    • /
    • 제16권6호
    • /
    • pp.546-552
    • /
    • 2010
  • As the demands for the safety and convenience applications of the vehicles increase, the data load for the In-vehicle Network has increased significantly. As a result, a deterministic and fault-tolerant communication system is required to implement the safety critical applications such as X-by-wire systems. FlexRay communication system is a new standard of network communication system which provides the high speed serial communication, time triggered bus and fault tolerant communication between electronic devices. In addition to time-triggered communication, as providing of the event-triggered communication such as CAN, FlexRay protocol is able to manage the restricted communication resource more effectively. This paper presents the development of FlexRay driver which will be applied to the future ECU's communication system. To develop the FlexRay driver, the FlexRay requirement specification and FlexRay specification is analyzed. The developed FlexRay driver is implemented by using MPC5567 microprocessor of the Freescale semiconductor. To verify the developed FlexRay driver, the waveform of the FlexRay driver was measured and compared with the CAN communication system. As a result, the bus load is reduced about 13% compared with the CAN communication system.

버스운전자 안전운행지원을 위한 교통사고 분석 연구 (The Analysis of Bus Traffic Accident to Support Safe Driving for Bus Drivers)

  • 빈미영;손슬기
    • 한국ITS학회 논문지
    • /
    • 제18권1호
    • /
    • pp.14-26
    • /
    • 2019
  • 버스운전자의 안전운행을 확보하기 위해서는 운전자 교통사고 원인 등을 분석해 안전운행을 지원 할 수 있는 정책이 뒷받침되어야 한다. 따라서 국토교통부는 사업용 차량에 운전자를 보조하는 첨단 운전자지원시스템 중 전방충돌경고장치, 차선이탈경고장치의 장착의무대상을 단계적으로 확대하는 방안을 마련한 바 있다. 그러나 버스운전자 교통사고분석과 관련된 기초 연구는 국내에서 많이 수행되고 있지 않아, 버스사고예방을 위하여 향후 버스운전자에게 가장 필요한 첨단 운전자지원시스템이 무엇인지에 대한 연구가 필요한 시점이다. 본 연구에서는 버스유형 및 반복사고 여부별 사고심각도를 분석하고 개선방안으로 버스의 첨단 운전자지원시스템 지원 방향을 제시하는데 목적이 있다. 사고심각도 분석은 순서형 로짓 모형을 이용해 분석하였으며 분석결과, 차대사람사고는 모든 모형에서 통계적으로 유의미하게 선정되었고 법규위반항목의 속도위반, 신호위반, 승객을 위한 안전조치위반이 제안된 모형에서 공통적으로 선정되었다. 따라서 향후 버스 대 사람사고를 감소시킬 수 있는 보행자감지시스템, 보행자 자동긴급제어장치의 설치가 반드시 필요하다.

버스 승객의 안전한 하차를 위한 컴퓨터비전 기반의 차량 탐지 시스템 개발 (Computer Vision-based Method of detecting a Approaching Vehicle or the Safety of a Bus Passenger Getting off)

  • 이광순;이경복;노광현;한민홍
    • 융합신호처리학회논문지
    • /
    • 제6권1호
    • /
    • pp.1-7
    • /
    • 2005
  • 본 논문은 컴퓨터 비전 기반의 인식 기법으로 주간 시내도로에 정차된 버스와 보도 사이로 접근하는 측후방 차량을 탐지하는 시스템을 설명한다. 이 시스템은 승객의 안전한 하차를 위해 버스 운전자와 승객에게 차량의 접근 유무를 알려준다. 버스의 측후방 영상은 버스가 정차할 때마다 버스 중앙 출입문 상단에 장착된 카메라에서 입력된다. 이 영상에서 버스와 보도 사이에 탐색영역을 설정하고 이 영역에서 영상의 변화와 소벨 필터링으로 차량을 탐지한다. 탐지된 차량의 중심점을 잡은 후, 위치 및 가로 세로의 크기를 이용하여 거리, 속도, 방향을 알아낸다. 이 정보를 이용하여 하차하는 승객에게 위험한 상황이라 판단될 경우, 운전자와 승객에게 위험을 알려준다. 실험결과로 시내 주행시 87% 이상의 탐지율을 나타내었다.

  • PDF

버스 운전직 근로자들의 감정노동이 직무 스트레스에 미치는 영향 (The Effect of Emotional Labor for Job Stress in Bus Drivers)

  • 김희량;이윤정;이금재;김희걸
    • 한국직업건강간호학회지
    • /
    • 제23권1호
    • /
    • pp.20-27
    • /
    • 2014
  • Purpose: This study was conducted to identify the association between emotional labor and job stress in bus drivers, as well as to propose management strategies for job stress. Methods: The study was conducted in February 2013 and involved 182 bus drivers working in the Gyeonggi area. Results: emotional labor was $9.5{\pm}2.34$ on average, and job stress was higher than the median of the same indicator among Korea's workers in the areas of physical environment, job autonomy, and relationship conflicts. Factors that affected job stress was lower if the subjects' Higher values for emotional labor indicated a higher level of job stress. Conclusion: To reduce among drivers, the following measures are necessary: increase the comfort of the driver's seat within the vehicle, provide adequate rest between bus headways, provide comfortable in-house rest facilities, and establish physical training spaces to reduce musculoskeletal disorders as well as programs for reducing back pain. In addition, relationship conflicts may be relieved by increasing job autonomy as much as possible, by granting autonomous control of working hours and bus headways, as well as by banning long work hours. Moreover, various club activities, exercise programs, and counseling programs that workers can be involved in together may be beneficial. This study is significant in that it identified the relationship of the bus drivers' emotional labor and job stress, which has previously been ignored as a research topic. Through its results, this study provides baseline data for the preparation of management strategies that can address the job stress of bus drivers.

패킷 방식의 DRAM에 적용하기 위한 새로운 강조 구동회로 (A New Pre-Emphasis Driver Circuit for a Packet-Based DRAM)

  • 김준배;권오경
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제50권4호
    • /
    • pp.176-181
    • /
    • 2001
  • As the data rate between chip-to-chip gets high, the skin effect and load of pins deteriorate noise margin. With these, noise disturbances on the bus channel make it difficult for receiver circuits to read the data signal. This paper has proposed a new pre-emphasis driver circuit which achieves wide noise margin by enlarging the signal voltage range during data transition. When data is transferred from a memory chip to a controller, the output boltage of the driver circuit reaches the final values through the intermediate voltage level. The proposed driver supplies more currents applicable to a packet-based memory system, because it needs no additional control signal and realizes very small area. The circuit has been designed in a 0.18 ${\mu}m$ CMOS process, and HSPICE simulation results have shown that the data rate of 1.32 Gbps be achieved. Due to its result, the proposed driver can achieved higher speed than conventional driver by 10%.

  • PDF

교통약자를 위한 저상버스 탑승예약 시스템 설계 (Design of Low-floor Bus Reservation System For the Transportation Weak)

  • 허성수;유윤식;박유현
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2018년도 춘계학술대회
    • /
    • pp.518-521
    • /
    • 2018
  • 대중교통 이용이 증가되면서 버스정보시스템을 통해 수집되고 있는 사물인터넷 데이터를 활용하여 사용자의 편의성을 고려한 연구들이 진행되고 있다. 하지만 교통약자가 저상버스를 이용하기 위해 제공되는 시스템은 일반 사용자에게 제공되는 시스템에 비해 미비한 편이다. 교통약자가 일반 사용자들처럼 저상버스를 원활하게 이용하기 위해서는 교통약자를 위한 서비스 시스템이 필요하다. 이에 본 논문에서는 교통약자가 저상버스 이용을 편리하게 할 수 있도록 서비스하기 위한 저상버스 탑승예약 시스템을 설계한다.

  • PDF

Operational Mode Analysis of Cooler Driver Electronics in Satellite and System Safety Margin

  • Kim, Kyudong
    • 항공우주시스템공학회지
    • /
    • 제14권6호
    • /
    • pp.79-84
    • /
    • 2020
  • Cooler driver electronics (CDE) for maintaining low temperature of the satellite payload IR sensor consists of a compressor that has a pulsation current load condition when it is operated. This pulsation current produces large voltage fluctuation, which affects both load and regulated bus stability. Thus, CDE power conditioning system consists of a primary bus, infrared power distribution unit for battery charging and protection, reverse current protection diode, and battery, which is used as a buffer. In this study, the operational mode analysis is performed by each part with equivalent impedance modeling verified through system level simulation. From this mode analysis, the safety margin for state of charge and open circuit voltage of the battery is determined for satisfying the minimum operational voltage of the CDE load.

DRAM bus system을 위한 analog calibration 적용 Pre-emphasis Transmitter

  • 박정준;차수호;유창식;기중식
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.653-654
    • /
    • 2006
  • A Pre-emphasis transmitter for DRAM bus system has achieved 3.2Gbps/pin operation at 1.8V supply voltage with 0.18um CMOS process. The transmitter has 800MHz PLL to generate 4 phase clocks. The 4 phase clocks are used for input clock of PRBS and multiplexing. One tap pre-emphasis is used to reduce inter symbol interference (ISI) caused by channel low pass effects. The analog calibration makes the optimized driver impedance independent with the PVT variation.

  • PDF

철도차량용 IGBT 추진제어 장치 (IGBT propulsion system for rolling stock)

  • 정은성;박윤환;장경현;김진선;한성수
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 1998년도 추계학술대회 논문집
    • /
    • pp.226-232
    • /
    • 1998
  • In this pager, we present IGBT VVVF inverters as a 1C1M propulsion system for electric car. This inverters are composed of high power IGBT's and controlled by compact control units. The control unit performs full digital control by using 32bit DSP and microconteroller. By using CAN-bus, high speed network is constructed within tow control units. The stack is simplified and optimized by using plate bus and IGBT driver units of hybrid-type.

  • PDF