• 한국가스학회지
• /
• 제17권3호
• /
• pp.20-26
• /
• 2013

본 연구에서는 수압파열시험 장비를 이용하여 Type3 복합용기의 설계 파열압력에 관한 실증연구를 수행하였다. 고압가스를 저장할 수 있는 6.8L급 사용압 31MPa Type3 복합용기에 대한 유한요소 설계해석을 통하여 파열압을 예측하였고 해석의 정확성을 확인하기 위하여 수압파열시험을 3회 실시하였다. 파열시험설비는 수압으로 최대 400MPa까지 가압이 가능한 장비를 활용하였다. 해석으로 예측된 소형 복합용기의 설계 파열압과 실제 파열시험 결과를 비교한 결과, 값의 차이는 4% 이내로 나타났다. 이를 통하여 해석기법의 신뢰성을 확인하였으며, 본 실증에서 검증된 해석기법을 복합용기의 안전성 확보를 위한 국내인증 및 제품검사에 적용할 예정이다.

• 천문학회보
• /
• 제37권2호
• /
• pp.111.1-111.1
• /
• 2012

We examine the relationship between a type II radio burst that started from an unusually high frequency of 425 MHz (fundamental component) and an associated white-light coronal mass ejection on 2011 February 13. The radio burst had a drift rate of 2.5 MHz/sec, indicating a relatively high shock speed. From SDO AIA observations we find that a loop-like erupting front sweeps across high density coronal loops near the start time of the burst (17:34:15 UT). We find fragmented structures of the type II burst, which indicates the signature of the shock propagating through the multiple loops. The deduced distance of shock formation (0.06 Rs) from flare center and speed of the shock (1100 km $s^{-1}$) using the measured density from AIA/SDO observations are comparable to the height (0.05 Rs, from the solar surface) and speed (700 km $s^{-1}$) of the CME leading edge observed by STEREO/EUVI. We conclude that the type II burst could be onset even in the low corona (41 Mm or 0.06 Rs, above the solar surface) if a fast CME shock passes through the high density loops.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.806-809
• /
• 1988

The frequency response characteristics of a bimorph type PZT piezoelectric transducer was investigated. In this study, function generator which generates short burst signal, plane reflection plate and oscilloscope were used to measure the characteristics of piezoceramic ultrasonic transducer. The resonant frequency of a bimorph type piezoceramic transducer which is acquired by using Tone-Burst Method had good agreement with the measured results from spectrum analyzer.

• 충청수학회지
• /
• 제22권3호
• /
• pp.367-374
• /
• 2009

The errors take place in the communication channel but they are often burst-error types. From properties of the Fi-bonacci code, it is not difficult to detect the burst-errors accompanying with this code. Fibonacci codes for correcting the double-burst-error patterns are presented. Given the channel length with the double-burst-error type, Fibonacci code correcting these errors is constructed by a simple formula.

• 한국안전학회지
• /
• 제30권4호
• /
• pp.168-173
• /
• 2015

A steam generator tubing is one of the main pressure boundary of the reactor coolant system in the nuclear power plants. Structural integrity refers to maintaining adequate margins against failure of the tubing. Burst pressure of a tube at tube support plate can be higher than that for a free-span tube because failure behaviors could be interfered from the tube support plate. Alternative repair criteria for out-diameter stress corrosion cracking indications in tubes to the drilled type tube support plate were developed, however, there are very limited information to the eggcrate type tube support plate. This paper discussed reinforcement effect of steam generator tube burst pressure with axial out-diameter stress corrosion cracking within an eggcrate type tube support plate. A series of tube burst tests were performed under the room temperature and it was found out that there is no significant but marginal effects.

• 한국안전학회지
• /
• 제20권2호
• /
• pp.38-43
• /
• 2005

Several nuclear power plants reported that they often found the combination cracks, which consist of longitudinal and circumferential cracks in the tubes. For the burst pressure of a tube with a single longitudinal or circumferential crack several experimental equations have been proposed in published literatures. But for the combination crack appropriate fracture criterion has not been proposed yet. In this study the burst pressures of a tube with a longitudinal crack or a T-type combination crack consisting of longitudinal and circumferential cracks were obtained experimentally and analytically. Fracture parameters such as crack opening angle (COA) were investigated by using elastic plastic analysis. Also the burst pressure far a T-type combination crack located near a tubesheet was considered to develop a length-based criterion. Because most of the axial, circumferential or combination cracks initiate in roll transition zone near the tubesheet.

• 한국정보처리학회논문지
• /
• 제7권6호
• /
• pp.1923-1931
• /
• 2000

In this paper, e analyze the performance of the PSS-type Viterbi decoder which can reduce calculations and power consumption using the Monte Carlo simulations. Gaussian and burst noise channels are considered in this simulation, and we achieve that convolutional interleaver can reduce complexity and power consumption in burst noise channel. In order to implement the high-speed PSS-type Viterbi decoder, the architectures of decoder are presented, and we implemented the PSS-type Viterbi decoder for r=1/2, k=3 using the VHDL tool, and prove the decoding process.

• 상하수도학회지
• /
• 제25권2호
• /
• pp.141-152
• /
• 2011

In this study, we extracted effective factors of pipe burst from the status data of water asset, operating data of pressure, volume and etc. and 7 years' pipe burst and repair records. The extracted factors were sorted by each attribution and then a statistical analysis was performed to generate a pipe burst probability function using the logistic regression model. As the result, material, diameter, length, laying year, pressure and road width affected to pipe burst significantly. Especially, in case of small diameter, laying year was most effective factor and in case of steel pipe, external loading was main cause of burst, and in case of cast iron, PE, PC, HP pipes, the deterioration of joint was main cause. The other side, as a result of Hosmer-Lemeshow goodness of fit test the models are turned out significant statistically. Also the classification criteria were determined to minimize the total cost from classification errors, when the predicted probability was more than 18% this pipe could have a chance of burst.

• 대한기계학회논문집A
• /
• 제28권2호
• /
• pp.158-164
• /
• 2004

Steam generator tubes experience widespread degradations such as stress corrosion cracking, wear, tube rupture, denting, fatigue and so on. The resulting damages can cause tube bursting or leak of the primary water which contains radioactivity Therefore the allowable size of the damage is required to be determined on the maintenance purpose. The burst pressure of a tube with a T-type combination crack consisting of longitudinal and circumferential cracks is obtained experimentally and analytically. Fracture parameters such as stress intensity factor and crack opening angle are investigated. Also the burst pressure for a T-type combination crack is compared with that of a single longitudinal crack to develop a length-based criteria.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.365-368
• /
• 1995

Rotary Compressor has many AE(Acoustic Emission) sources according to condition of parts because it is operated with combination of various parts. In this study, analysis of AE raw signal generated form Rotary compressor which artificially-made parts inflicted abnormal condition was carried out. AE raw signals were acquired form high-speed A/D board, and many burst type signals were observed. By analyzing burst type signals which is caused form internal AE source,efficient AE parameters for monitoring and diagnosis were presented.