• Geomechanics and Engineering
• /
• 제12권1호
• /
• pp.53-69
• /
• 2017

Rock burst may cause serious casualties and property losses, and how to conduct effective monitoring and warning is the key to avoid this disaster. In this paper, we reviewed both the rock burst mechanism and the principle of using electromagnetic radiation (EMR) from coal rock to monitor and forewarn rock burst, and systematically studied EMR monitored data of 4 rock bursts of Qianqiu Coal Mine, Yima Coal Group, Co. Ltd. Results show that (1) Before rock burst occurrence, there is a breeding process for stress accumulation and energy concentration inside the coal rock mass subject to external stresses, which causes it to crack, emitting a large amount of EMR; when the EMR level reaches a certain intensity, which reveals that deformation and fracture inside the coal rock mass have become serious, rock burst may occur anytime and it's necessary to implement an early warning. (2) Monitored EMR indicators such as its intensity and pulses amount are well and positively correlated before rock bursts occurs, generally showing a rising trend for more than 5 continuous days either slowly or dramatically, and the disaster bursts generally occurs at the lower level within 48 h after reaching its peak intensity. (3) The rank of EMR signals sensitive to rock burst in a descending order is maximum EMR intensity > rate of change in EMR intensity > maximum amount of EMR pulses > rate of change in the amount of EMR pulses.

• Journal of Korean Society of Water and Wastewater
• /
• 제37권6호
• /
• pp.347-361
• /
• 2023

Water utilities are making various efforts to reduce water losses from water networks, and an essential part of them is to recognize the moment when a pipe burst occurs during operation quickly. Several physics-based methods and data-driven analysis are applied using real-time flow and pressure data measured through a SCADA system or smart meters, and methodologies based on machining learning are currently widely studied. Water utilities should apply various approaches together to increase pipe burst detection. The most intuitive and explainable water balance method and its procedure were presented in this study, and the applicability and detection performance were evaluated by applying this approach to water supply pipelines. Based on these results, water utilities can establish a mass balance-based pipe burst detection system, give a guideline for installing new flow meters, and set the detection parameters with expected performance. The performance of the water balance analysis method is affected by the water network operation conditions, the characteristics of the installed flow meter, and event data, so there is a limit to the general use of the results in all sites. Therefore, water utilities should accumulate experience by applying the water balance method in more fields.

• Journal of the Optical Society of Korea
• /
• 제6권4호
• /
• pp.172-179
• /
• 2002

Like the conventional digital storage systems, volume holographic memory can be deteriorated by burst errors due to its high-density storage characteristics. These burst errors are used byoptical defects such as scratches, dust particles, etc. and are two-dimensional in a data page. To deal with these errors, we introduce some concepts for describing them and propose efficient two- dimensional interleaving schemes. The schemes are two-dimensional lattices of an error-correction code word and have equilateral triangular and square structures. Using these structures, we can minimize the number of code words that are interleaved and improve the efficiency of the system. For large size burst errors, the efficient interleaving structure is an equilateral triangular lattice. However, for some small size burst errors, it is reduced to a square lattice.

• Proceedings of the KSME Conference
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.339-344
• /
• 2001

The transmission pipeline industry spends many millions of dollars annually performing inline inspections, excavating sites of possible corrosion, and repairing or replacing damaged sections of pipe. New criteria for evaluation the integrity of corroded pipe have been developed in recent years to help in controlling these costs. These new criteria vary widely in their estimates of integrity and the most appropriate criterion for a given pipeline is not always clear. This paper presents an overview, comparison and evaluation of acceptability criteria for corrosion defects in pipelines. By full scale burst tests, this paper have assessed the relative accuracy of each of theses criteria in predicting failure and remaining strength. Many of the criteria appear to be excessively conservative and indicate that defects must be repaired when none is needed, based upon burst test data.

• Nuclear Engineering and Technology
• /
• 제52권10호
• /
• pp.2402-2409
• /
• 2020

Analytical criteria for the onset of fuel fragmentation and Burst Fission Gas Release in fuel rods with ballooned claddings are formulated. On that basis, the GRSW-A model integrated with a fuel behaviour code is updated. After modification, the updated code is successfully applied to simulation of the Halden LOCA test IFA-650.12. Specifically, the calculation with Burst Fission Gas Release during the test resulted in prediction of cladding failure, whereas it could not be predicted at the test planning, before new models were implemented. A good agreement of the current model with experimental data for transient Fission Gas Release in the tests IFA-650.12 and IFA-650.14 is shown, as well.

• Proceedings of the Korea Information Processing Society Conference
• /
• 한국정보처리학회 2002년도 춘계학술발표논문집 (하)
• /
• pp.1471-1474
• /
• 2002

광대역 무선 이동 서비스의 사용자 요구가 증대됨에 따라 기존에 서로 다른 제품군이라고 생각했던 통신 서비스간의 충돌이 예상되고 있다. 무선랜과 기존 이동 통신시스템의 진화본인 HDR, 그리고 스마트 안테나 기술로 유명한 ArrayComm 에서 새롭게 내놓은 I_Burst 가 광대역 무선 이동 서비스 시스템으로 고려되고 있다. 본 논문에서는 기존의 무선랜을 이용한 시스템의 장, 단점을 정리하고 새롭게 제안된 i_Burst의 기술적 특징과 기존 시스템과 대비되는 장점들을 정리하고 있다.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제54권6호
• /
• pp.17-21
• /
• 2017

Since holographic data storage has the advantage of high recording density and data transfer rate, it is a candidate for the next generation storage systems. However, Holographic data storage system is affected by interpage interference and two dimensional intersymbol interference. Also, burst error occurs by physical impact. In this paper, we propose an LDPC product code using modified log-likelihood ratio and extrinsic information to correct burst error and improve performance of holographic data storage. The performance of proposed LDPC product code is 0.5dB better than that of the conventional LDPC code.

• Journal of the Korean Society of Safety
• /
• 제19권2호
• /
• pp.11-15
• /
• 2004

The fretting-fatigue by leaking is one of the significant degradation in steam generator tubes. In this study, the burst pressure of inclined damaged steam generator tubes were obtained from three criterions by using the finite element method. The analysis results were also compared with the experiment data from published references and they showed a good agreement with the experiment data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제7권2호
• /
• pp.171-176
• /
• 2003

Meteor Burst Communication can provide effective and economical means of communication where long distance VHF NLOS(None Line of sight) data transmission is needed; often ranges more than 1200 km. It has been, however, so far considered unsuitable for distance as short as 700km application because of phenomenal decrease in burst durations, which leads to decreation of total duty rate of the system. This paper introduce experimental characteristics of very shot distance MB(Meteor Hurst) path. Also the occurring rate and average length measured on 50km paths between kyongsan-city to Andong-city shows that Meter Burst communication is useful communication system in mountain and valley communication.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• 제46권10호
• /
• pp.9-15
• /
• 2009

In this paper, we invented a new structure of fast ATC(Automatic Threshold Control) circuit. Using the structure we made a new burst-mode limiting amplifier with fast ATC function using commercial $0.8{\mu}m$ BiCMOS technology. It's ATC function worked so fast that even the first bit of burst-data could be detected, which confirmed that the new structure was useful for fast ATC. However, in the beginning of a burst, distortions in duty-cycle occurred and increased up to 59% of duty-cycle as amplitude of input signal increased. But we confirmed that after 10 cycles passed, duty-cycles was staying below 52% of duty-cycle for any magnitude of input signal.