• ETRI Journal
• /
• 제24권4호
• /
• pp.311-322
• /
• 2002

Presently, optical burst switching (OBS) technology is under study as a promising solution for the backbone of the optical Internet in the near future because OBS eliminates the optical buffer problem at the switching node with the help of no optical/electro/optical conversion and guarantees class of service without any buffering. To implement the OBS network, there are a lot of challenging issues to be solved. The edge router, burst offset time management, and burst assembly mechanism are critical issues. In addition, the core router needs data burst and control header packet scheduling, a protection and restoration mechanism, and a contention resolution scheme. In this paper, we focus on the burst assembly mechanism. We present a novel data burst generation algorithm that uses hysteresis characteristics in the queueing model for the ingress edge node in optical burst switching networks. Simulation with Poisson and self-similar traffic models shows that this algorithm adaptively changes the data burst size according to the offered load and offers high average data burst utilization with a lower timer operation. It also reduces the possibility of a continuous blocking problem in the bandwidth reservation request, limits the maximum queueing delay, and minimizes the required burst size by lifting up data burst utilization for bursty input IP traffic.

• Nuclear Engineering and Technology
• /
• 제51권6호
• /
• pp.1525-1531
• /
• 2019

The indigenous nuclear power program of India is based mainly on a series of Pressurised Heavy Water Reactors (PHWRs). A burst correlation for Indian PHWR fuel claddings has been developed and empirical burst parameters are determined. The burst correlation is developed from data available in literature for single-rod transient burst tests performed on Indian PHWR claddings in inert environment. The heating rate and internal overpressure were in the range of 7 K/s-73 K/s and 3 bar-80 bar, respectively, during the burst tests. A burst criterion for inert environment, which assumes that deformation is controlled by steady state creep, has been developed using the empirical burst parameters. The burst criterion has been validated with experimental data reported in literature and the prediction of burst parameters is in a fairly good agreement with the experimental data. The burst criterion model reveals that increasing the heating rate increases the burst temperature. However, at higher heating rates, burst strain is decreased considerably and an early rupture of the claddings without undergoing considerable ballooning is observed. It is also found that the degree of anisotropy has significant influence on the burst temperature and burst strain. With increasing degree of anisotropy, the burst temperature for claddings increases but there is a decrease in the burst strain. The effect of anisotropy in the ${\alpha}$-phase is carried over to ${\alpha}+{\beta}$-phase and its effect on the burst strain in the ${\alpha}+{\beta}$-phase too can be observed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.177-180
• /
• 2000

Optical burst switching(OBS) is a new switching paradigm to supporting bursty traffic on the Internet efficiently. OBS separates burst level and control level. To handle data burst efficiently, the scheduling schemes in optical burst switching systems must keep track of future resource availability when assigning arriving data bursts to wavelength channels. In this paper, we evaluate the performance of three scheduling schemes which are called Horizon, Single-gap and Multiple-gap, as a basic study for the future research of Optical Internet. Thus, firstly, we analyze the trade-off between the performance and the processing overhead of each scheme. In addition, the performance of OBS system which uses Multiple-gap scheduling is evaluated in detail under various network size. We use simulation for performance evaluation in terms of burst loss rate(BLR), wavelength channel utilization and the number of management data.

• 대한산업공학회지
• /
• 제28권2호
• /
• pp.139-146
• /
• 2002

The third generation mobile communication needs to provide multimedia service with increased data rates. Thus an efficient allocation of radio and network resources is very important. This paper models the 'burst switching' as an efficient radio resource allocation scheme and the performance is compared to the circuit and packet switching. In burst switching, radio resource is allocated to a call for the duration of data bursts rather than an entire session or a single packet as in the case of circuit and packet switching. After a stream of data burst, if a packet does not arrive during timer2 value ($\tau_{2}$), the channel of physical layer is released and the call stays in suspended state. Again if a packet does not arrive for timerl value ($\tau_{1}$) in the suspended state, the upper layer is also released. Thus the two timer values to minimize the sum of access delay and queuing delay need to be determined. In this paper, we focus on the decision of $\tau_{2}$ which minimizes the access and queueing delay with the assumption that traffic arrivals follow Poison process. The simulation, however, is performed with Pareto distribution which well describes the bursty traffic. The computational results show that the delay and the packet loss probability by the burst switching is dramatically reduced compared to the packet switching.

• 한국통신학회논문지
• /
• 제30권10A호
• /
• pp.912-921
• /
• 2005

Optical Burst Switched (OBS)는 If over WDM 망에서 테라비트 전송을 하기 위한 진보된 기술이다. OBS의 핵심 기술 중 하나는 데이터 버스트(DB : Data Burst)의 경쟁을 막기 위한 채널 스케쥴링 이다. OBS망에서 버스트의 제어패킷(CHP : Control Header Packet)과 데이터 버스트는 시간 간격(Time Gap)을 가지고 전송된다. 버스트 스위치 노드에 CHP가 도착하면 데이터 버스트을 위해 스케줄링 알고리즘을 사용하여 파장/채널(wavelength/channel)과 같은 자원을 예약하여 광전광(O/E/O)변환 없이 데이터 버스트를 전송해준다. 데이터 버스트를 위해 채널 스케줄링 과정에서 버스트간의 경쟁과 시간 간격이 발생되어 자원의 사용율과 버스트 손실 확률이 떨어진다. 기존에 제안된 방법들은 이러한 문제를 해결하기 위하여 많은 연구가 되어 지고 있다. 본 논문에서는 데이터 할당에서 발생되는 데이터간 간격과 데이터 손실에 중점을 두어 버스트 손실 확률과 자원 사용율을 극대화하기 위하여 버스트의 개방 시간)Release Time)을 이용한 채널 스케줄링 알고리즘 RTUC(Release Time Unscheduled Channel)을 제안한다. 시뮬레이션 결과 기존에 제안된 스케쥴링 알고리즘(LAUC, LAUC-VF)보다 버스트의 생존(Survival)과 효율적인 자원 사용 및 지연에서 개선된 성능을 확인하였다. 하지만, 로드가 적었을 경우 상대적으로 기존의 스케줄링 알고리즘보다 성능저하가 확인되었고, 로드가 증가했을 경우에는 데이터 손실 면에서 우수함을 확인하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권4호
• /
• pp.188-193
• /
• 2003

This paper describes a novel burst-mode clock and data recovery (CDR) circuit which can be used for 622Mbps burst mode applications. The CDR circuit is basically a phase locked loop (PLL) having two phase detectors (PDs), one for the reference clock and the other for the NRZ data, whose operations are controlled by an external control signal. This CDR was fabricated in a 1-poly 5-metal $0.25{\;}\mu\textrm{m}$ CMOS technology. Jitter generation, burst/continuous mode data receptions were tested. Operational frequency range is 320Mhz~720Mhz and BER is less than 1e-12 for PRBS31 at 622Mhz. For the same data sequence, the extracted clock jitter is less than 8ps rms. Power consumption of 100mW was measured without I/O circuits.

• 대한임베디드공학회논문지
• /
• 제8권5호
• /
• pp.255-264
• /
• 2013

Resolving of memory access latency is one of the most important problems in modern embedded system design. Recently, tons of studies are presented to reduce and hide the access latency. Burst/page data transfer modes are representative hardware techniques for achieving such purpose. The burst data transfer capability offers an average access time reduction of more than 65 percent for an eight-word sequential transfer. However, solution of utilizing such burst data transfer to improve memory performance has not been accomplished at commercial level. Therefore, this paper presents a new technique that provides the maximum utilization of burst transfer for memory accesses with local variables in code by reorganizing variables placement.

• 디지털콘텐츠학회 논문지
• /
• 제13권1호
• /
• pp.111-118
• /
• 2012

버스트는 가변 비트율로 저장된 비디오 데이터를 전송하려는 경우 급격하게 높은 전송률이 요구되는 것으로 네트워크 자원의 비효율적인 사용의 원인이 될 수 있다. 스무딩은 이를 방지하기 위해 가변 비트율로 저장된 비디오 데이터를 고정 비트율로 변환하는 전송 계획을 세우는 기법으로, CBA, MCBA, MVBA 알고리즘들이 있다. 본 논문에서는 기존 CBA, MCBA, MVBA 알고리즘들의 버스트 감소 정도를 평가하기 위해, 가변 비트율로 저장된 비디오 소스와 스무딩 알고리즘에서의 전송 계획을 버스트에 영향을 미치는 요소들로 비교한다. 사용된 평가 요소는 최대 프레임 바이트 수, 최대 GOP 바이트 수, 프레임당 전송률 변화량, GOP당 전송률 변화량이다. 실험 결과, 실험에 사용된 모든 스무딩 알고리즘들의 버스트 관련 평가 요소들이 특정한 경우를 제외하고 원래 비디오 소스보다 낮았다.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1043-1048
• /
• 2011

In this paper, a newsynchronization technique applied to burst-mode communication is proposed. A synchronization technique is to estimate carrier frequency and phase offsets in a noisy channel environment. A fundamental problem for estimating the parameters(carrier phase and frequency offsets) in burst-mode transmission is that the ways of pursuing estimation accuracy and transmission efficiency are always trade-off. To solve this problem, a new carrier recovery technique is proposed to improve the transmission efficiency with reliable performance especially at low S/N. In the proposed technique, the synchronization parameters are first estimated based on a data-aided feed-forward estimation scheme. Then, a phase tracker using decision-directed DPLL estimates the phase offset for the data portion of the burst data. From simulation results, it shows fast synchronization with shorter preamble maintaining reasonable BER performance at low S/N.

• 한국통신학회논문지
• /
• 제28권8A호
• /
• pp.644-649
• /
• 2003

새로운 구조의 622Mbps급 버스트 모드 클럭/데이터 복원 회로를 구현하였다. 회로는 2개의 muxed oscillator (MO)와 위상 동기 회로 등으로 구성되어 있으며, passive optical network(PON) 시스템에 사용될 수 있도록 instantaneous locking 특성을 갖는다. 또한. 지터가 내재된 데이터가 인가되어도 데이터에 따라 클럭이 연동되어 항상 최적의 샘플링 포인트를 갖는다. 이 회로는 0.35$\mu\textrm{m}$ CMOS 공정을 이용하여 제작되었다. 측정 결과 제안된 클럭/데이터 복원 회로는 400Mbps 680MbPs 까지의 버스트 모드 입력 데이터를 에러없이 복원하였다.