본 논문에서는 알루미늄 라이너와 탄소섬유/에폭시 및 유리섬유/에폭시로 구성된 복합소재 압력용기에 대한 응력 안전성 연구결과를 제시하고 있다. 9.2L의 저장용량을 갖는 수소가스 자동차용 복합소재 압력용기에는 35MPa의 충전압력으로 수소가스를 압축한 경우이다. FEM 해석결과는 미국의 수소가스 압력용기에 대한 DOT-CFFC와 한국의 KS B ISO 인증기준에 기반하여 평가하였다. FEM 해석결과에서 알루미늄 라이너에 걸리는 응력 247MPa는 알루미늄 항복강도(272MPa)의 95%에 해당하는 안전기준에 비해 충분히 낮다는 결과이다. 그리고 알루미늄의 표면에 감은 탄소섬유 복합소재는 후프방향과 헤리컬방향에서 발생한 최대탄소섬유응력이 29.43%와 28.87% 수준으로 각각 나타났기 때문에 최소파열압력에서의 최대섬유응력 대비 30% 이하를 유지해야 한다는 안전기준에 부합하므로 안전하다. 또한, 탄소섬유 복합소재에 대한 응력비는 후프방향과 헤리컬방향에 대해 3.4와 3.46으로 각각 예측되었기 때문에 최소안전기준인 2.4보다 높아 안전한 것으로 나타났다.
CNG 차량에서 실사용 중 Type3 복합재료 압력용기의 외부 복합재 층에 결함이 발생된다면, 용기의 구조적 성능 즉, 원래의 설계수명보다 반복수명이 감소되는 현상을 초래할 수 있다. 이에 따라, 본 연구에서는 복합재 결함을 고려한 복합재료 압력용기의 유한요소 모델링과 해석 기법을 제시하였다. Type3 복합재료 압력용기의 유한요소해석은 자긴처리 공정에서 알루미늄 라이너의 소성 변형으로 인해 경로 의존적 현상을 보이므로, 실사용 중 결함이 발생되는 실제 환경을 고려한 해석에서 결함은 자긴압력 이후에 도입되어야한다. 이러한 상황의 사실적인 시뮬레이션을 위해, 해석의 중간단계에서 결함이 도입되는 유한요소 모델링과 해석 기법이 제시되었으며, 해석결과는 해석의 시작단계에서부터 모델에 초기결함을 내포하는 일반적 유한요소해석과 비교되었다. 제안된 해석 기업은 Type3 복합재료 압력용기의 복합재층 손상에 따른 영향성 평가 및 실사용 중에서의 검사 기준을 마련하는데 효과적으로 사용될 수 있다.
VoIP에서 패킷의 손실은 음성의 품질에 영향을 주는 가장 중요한 요인이다. 따라서 수신된 정보로부터 손실된 패킷을 복구하는 것은 중요하다. 따라서 본 논문은 VoIP에서 가장 많이 사용되는 CELP 부호화기를 위한 수신측 기반의 손실 패킷 복구방법을 제안한다. 제안하는 WSOLA(Waveform Shift OverLab Add)기반의 BS-PLC (Both Side Packet Loss Concealment) 방법은 패킷 손실이 발생하였을 경우 미래 패킷을 이용할 수 있는 경우와 그렇지 않을 경우로 나누고, LP(Linear prediction) 파라미터와 여기 신호를 복구한다. 미래 패킷을 이용할 수 없는 경우에는 과거에 전송된 정상 패킷만을 가지고 복원을 하며, 미래 패킷을 이용할 수 있을 경우에는 과거의 정상 패킷과 미래의 정상 패킷을 동시에 이용하여 손실된 패킷을 복구한다. 연속 패킷 손실 환경은 Gilbert 모델로 설정하였고, 제안한 알고리즘을 VoIP에서 가장 많이 사용되는 CELP 음성부호화기인 G.729에 적용하여 성능을 비교한다. 성능 비교를 위해 손실율을 변화시키면서 SNR(Signal to Noise)와 MOS(Mean Opinion Score)측정하였고, 제안한 방법을 G.729의 패킷 손실 은닉 방법과 비교하였다. 실험 결과, 평균 손실률이 $20\%$에서도 SNR은 2dB, MOS값은 0.3정도로의 음질 개선을 보였다.
Monitor of All-sky X-ray Image (MAXI) is a Japanese X-ray all-sky surveyer mounted on the International Space Station (ISS). It has been scanning the whole sky since 2009 during every 92-minute ISS rotation. X-ray transients are quickly found by the real-time nova-search program. As a result, MAXI has issued 133 Astronomer's Telegrams and 44 Gamma-ray burst Coordinated Networks so far. MAXI has discovered six new black holes (BH) in 4.5 years. Long-term behaviors of the MAXI BHs can be classified into two types by their outbursts; a fast-rise exponential-decay type and a fast-rise flat-top one. The slit camera is suitable for accumulating data over a long time. MAXI issued a 37-month catalog containing 500 sources above a ~0.6 mCrab detection limit at 4-10 keV in the region ${\mid}{b}{\mid}$ > $10^{\circ}$. The SSC instrument utilizing an X-ray CCD has detected diffuse soft X-rays extending over a large solid angle, such as the Cygnus super bubble. MAXI/SSC has also detcted a Ne emission line from the rapid soft X-ray nova MAXI J0158-744. The overall shapes of outbursts in Be X-ray binaries (BeXRB) are precisely observed with MAXI/GSC. BeXRB have two kinds of outbursts, a normal outburst and a giant one. The peak dates of the subsequent giant outbursts of A0535+26 repeated with a different period than the orbital one. The Be stellar disk is considered to either have a precession motion or a distorted shape. The long-term behaviors of low-mass X-ray binaries (LMXB) containing weakly magnetized neutron stars are investigated. Transient LMXBs (Aql X-1 and 4U 1608-52) repeated outbursts every 200-1000 days, which is understood by the limit-cycle of hydrogen ionization states in the outer accretion disk. A third state (very dim state) in Aql X-1 and 4U 1608-52 was interpreted as the propeller effect in the unified picture of LMXB. Cir X-1 is a peculiar source in the sense that its long-term behavior is not like typical LMXBs. The luminosity sometimes decreases suddenly at periastron. It might be explained by the stripping of the outer accretion disk by a clumpy stellar wind. MAXI observed 64 large flares from 22 active stars (RS CVns, dMe stars, Argol types, young stellar objects) over 4 years. The total energies are $10^{34}-10^{36}$ erg $s^{-1}$. Since MAXI can measure the spectrum (temperature and emission measure), we can estimate the size of the plasma and the magnetic fields. The size sometimes exceeds the size of the star. The magnetic field is in the range of 10-100 gauss, which is a typical value for solar flares.
Background: Ginseng (G) and Ligustrum lucidum Ait (LLA) are core traditional Chinese medicines in treating myelosuppression formula. The present study was designed to profile effect of G and LLA herb pair (G-LLA) on myelosuppressed mice. Methods: The mice myelosuppression model was established by intraperitoneal (i.p.) injection of cyclophosphamide (Cy). Hematopoietic function of bone marrow was measured by hemopoietic progenitor cell culture and peripheral blood count, and serum hemopoietic factors were tested by enzyme-linked immunosorbent assay. Bone marrow cell cycle was performed by flow cytometry. HPLC was used to measure 20 potential chemical components related to myelosuppression, including ginsenoside Rg1, Re, Rb1, Rc, Rb2, Rb3, Rd, Rk3, Rh4, 20 (S)-Rg3, 20 (R)-Rg3, Rk1, Rg5, salidroside, and so on. Results: G, LLA, and G-LLA improved the amount of peripheral blood cells and bone marrow cells of myelosuppressed mice (P < 0.01). They significantly increased the colony quantity of colony-forming unit-granulocyte macrophage, burst-forming unit-erythroid, colony-forming unit-erythroid, and colony-forming unit-megakaryocyte and amount of G2/M and S phase cells (P < 0.01). They also significantly decreased the amount of hematopoiesis-related cytokines (P < 0.01). The content of chemical components in G-LLA changed, and the change of rare saponin was the most obvious. Conclusion: These results show that G-LLA herb pair might produce synergistic or complementary compatibility effects on bone marrow suppression after chemotherapy. It suggests that the substance basis of G-LLA for treating bone marrow suppression may be effective chemical components.
합성섬유를 주 여재로 충진한 실험실 규모의 수직 지하흐름형 습지를 제작하여 인공축산단지 강우유출수 처리시험을 수행하였다. 3개의 습지에 대하여 수리학적 체류시간은 각각 2, 4, 8일 로 운전하였으며 매일 1회씩 내부순환을 실시하였다. 운전기간 동안에 매일 일반적인 수질인자에 대하여 모니터링을 실시하였으며 갑자기 HRT에 따라 순차적으로 거품이 발생되면서 처리수의 COD가 증가하는 현상이 관찰되었다. 따라서 연구의 방향을 거품의 발생원인을 분석하는데 초점을 맞추게 되었으며 거품의 출처 및 유기물질 농도의 증가는 습지에 충진한 폴리프로필렌 합성섬유가 분해되면서 방출된 것으로 분석되었다. 거품의 발생 및 유기물질의 농도증가는 질소제거의 효율증가와 밀접한 관련이 있었으며 2가지의 중요한 역할을 수행한 것으로 밝혀졌다. 먼저 거품은 습지내부에서 질산화에 필요한 산소를 억류하면서(hold-up) 질산화를 촉진시키며 거품에 내재된 유기물질은 탈질에 필요한 탄소원으로 작용한 것으로 판단된다. 따라서 거품발생시기와 질소제거효율이 증가한 시기가 일치한 것으로 보인다. 이후에 거품문제가 사라지면서 질소제거 수준은 서서히 감소하여 이전의 거품이 없던 시기로 회귀하였다.
폴리아크릴로니트릴(PAN)계 탄소섬유와 목재펄프를 이용하여 탄소섬유의 길이와 함량 및 강화 종이의 평량을 달리하여 각각 탄소섬유 강화 종이를 제조한 후 탄소섬유와 펄프섬유와의 접착특성 및 강화 종이의 물리적 특성과 전기전도도를 조사하였다. 탄소섬유 강화 종이의 형성은 탄소섬유와 펄프섬유의 계면에서의 화학적 결합이라기보다는 물리적인 얽힘과 접착이었으며, 탄소섬유의 첨가량을 증가시키면 강화 종이의 두께와 인열강도는 증가하는 반면 인장강도와 파열강도는 감소하였다. 탄소섬유의 길이가 짧을수록 강화 종이 내에서 섬유의 분산성이 양호하였으나 가장 우수한 전기전도도는 탄소섬유의 길이가 10 mm일 때였다. 강화 종이의 전기전도도는 탄소섬유의 함량이 2 wt%일 때부터 급격히 증가하다가 8 wt% 이상이 되면 서서히 증가하는 S자형 곡선을 보였으며, 강화 종이의 평량 증가에 따라 선형적으로 비례하여 향상되었다. 따라서, 전기전도도와 물리적 특성이 우수한 강화 종이를 얻기 위해서는 탄소섬유의 함량을 증가시킴과 동시에 평량을 증가시키는 것이 바람직하다.
SoC 설계 복잡도의 증가로 인한 설계 비용 감소 및 짧은 time-to-market의 만족을 위해 IP에 기반한 설계 방식이 사용되고 있다. 기존에 설계 검증된 IP를 사용할 경우 시스템 버스와의 통신을 가능하게 하는 인터페이스 회로를 설계해 주어야 하며, 설계 비용을 감소시키기 위해서는 인터페이스 회로의 자동생성이 요구된다. 본 논문에서는 IP프로토콜을 기술하는 방법과 이 기술을 통하여 IP의 프로토콜 제어를 위한 FSM(Finite State Machine)을 생성하여 버스와의 인터페이스 회로를 자동생성하는 방법을 제안한다. 제안한 시스템에서는 프로토콜 분석의 어려움을 줄이기 위해 표준화된 버스의 FSM을 라이브러리화 하였다. 제안된 방법으로 AMBA AHB에 사용되는 슬레이브 형태 IP의 인터페이스 회로를 자동생성한 결과 매뉴얼로 설계한 인터페이스 회로에 비해 면적은 4.5%의 증가를 보였다. 100 Mhz의 버스 동작 속도와 34 Mhz의 슬레이브 모듈의 동작 속도 환경에서 16개의 32 비트 데이터를 버스트 모드로 전송시 latency는 평균 7.1%의 증가를 보였으나, 시스템 버스의 점유는 평균 64.9% 정도로 감소하였다. 본 논문에서 제안한 시스템을 사용하여 시스템 버스의 효율을 증가한 인터페이스 회로를 생성해 낼 수 있다.
During a model test of Hutton TLP, a "ringing" response was first observed about 20 years ago. This phenomenon is a resonant build up over the time of wave period and this burst-like motion can cause the extreme load on the TLP tether. It is often detected in the large and steep irregular waves but the generation mechanism leading to the "ringing" is not yet well understood. According to the research since then, the higher order harmonic components may account for the "ringing" on the floating offshore structures. The main purpose of the present research is, thus, to measure the higher harmonic forces exerted on a vertical truncated circular column and to compare them with available data. A vertical truncated cylinder with a diameter of 3.5inch and a draft of 10.5inch is used as a test structure, which is a scaled model of ISSC TLP column. The cylinder is installed at a distance of 45ft from the wave maker in order to avoid parasitic waves created in the wave flap. Attached to the upper part of the cylinder are two force gages to measure the horizontal (surge) and vertical (heave) forces on the cylinder. The incoming waves are Stokes waves with a slope ranging from 0.06 to 0.24. The forces and waves are measured for 60 seconds with a sampling rate of 50 Hz. Among the recorded data, the first 10 waves are excluded because of transient behavior of the waves and the next The horizontal and vertical forces are analyzed up to 5th order harmonics. The horizontal forces are then compared to the values from the theoretical model called "FNV model". In addition, force transfer functions are also investigated. Major findings in this research are below. 1) The first order forces measured are slightly larger than the theoretical values of "FNV model" 2) The "FNV model" considerably overpredicts the second order forces. 3) The larger the amplitude and more extreme the wave slope, the smaller the predictions are compared to the experimental. 4) The higher harmonic forces are significantly smaller than the first harmonic force for all wave parameters. 5) The normalized forces vs. waves slopes are almost constant in the lower harmonics but vary a lot in the higher harmonics. 6) The trend of forces is more nonlinear in the horizontal forces than in the vertical forces as the wave slope increases. 7) The part of the results above is also observed by other researchers and confirmed again through the present work.
년간 시비기준량을 설정하기 위해 포도 신품종(진옥, 홍이슬)의 각 부분의 양분흡수량을 4년간 조사하였다. 첫번째 해에는 다른 품종보다 진옥 품종의 뿌리 발달이 왕성하게 이루어지는 것으로 조사되었다. 1~2년 생장한 포도와 비교해 볼 때 3~4년 생장한 포도는 비슷한 비율의 양분을 흡수하였지만 약 30%의 양분이 과실로 배분되었다. 칼륨은 과실에 있어서 중요한 양분으로 과피와 과육에 건물중 대비 약 1%의 함량을 나타내었다. 마그네슘은 주로 엽병에 건물중 대비 약 1%로 집적되었다. 칼슘은 잎에 축적되었고(0.95%) 그 양은 잎의 질소함량(1.25%)과 비슷한 양이었다. 진옥 품종의 4년생 양분요구량은 질소 55.5g, 인산 7.7g, 칼륨 42.0g, 칼슘 34.6g, 마그네슘 11.1g으로 캠벨얼리 품종의 질소 57.4g, 인산 7.9g, 칼륨 44.4g, 칼슘37.3g, 마그네슘 12.2g 보다 적은양임을 알 수 있었다. 다른 품종에 비해서 홍이슬의 경우에는 적은양의 양분이 요구되었는데 낮은 발아율과 빈가지 증상을 조절할 수 있는 재배적 조치가 선행되어야 할 것이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.