• Communications for Statistical Applications and Methods
• /
• v.16 no.5
• /
• pp.871-880
• /
• 2009

Recently, there has been much development on burn-in models in reliability area. Especially, the previous burn-in models have been extended to more general cases. For example, (i) burn-in procedures for repairable systems have been developed (ii) an extended assumption on the failure rate of the system has been proposed and (iii) a stochastic model for burn-in procedure in accelerated environment has been developed. In this paper, recent extensions and advances in burn-in models are introduced and some issues to be considered in the future study are discussed.

• Archives of Plastic Surgery
• /
• v.35 no.4
• /
• pp.373-378
• /
• 2008

Purpose: In full thickness burn, the depth of burn is known to increase until around 1-3 days after the burn. However, no study on how the depth increase during the first 24 hours has been conducted. Therefore, the authors investigated how the depth of burn changes within the first 24 hours after the burn by using the standardized burn model. Methods: A total of four experiments on pigs were carried out for this study. Experiment 1 was performed to examine how temperature affects the depth of burn. The digitally controlled aluminum thermal block was set at different temperatures-80, 90 and 100 degrees in Celsius, respectively. Then the pig was exposed to the block for 15 seconds each time. The time exposed to heat was set as a variable for the Experiment 2. The temperature was maintained at 80 degrees Celsius, and the pig was contacted with the thermal block for 5, 10 and 20 seconds, respectively. The biopsy of the tissues were performed in one hour, 6 hours, 24 hours, and 7 days after the burn. After hematoxylin and eosin staining a percentage of the depth from a basement membrane of epidermis to the deepest tissue damaged by the burn against total dermal thickness was measured. Results: In Experiment 1, the depth of burn increased considerably as time passed by. At all three temperatures, differences in depths measured in 6 and 24 hours, and in 1 hour and 7 days were both significant. In addition, the depth deepened as the temperature went higher. In the case of Experiment 2, the depth of burn also increased significantly as time passed by. At all three times, differences in depth measured in 6 and 24 hours, and in 1 hour and 7 days were also significant. Moreover, the depth extended with longer contact time when it was compared according to the time. Conclusion: Full thickness burn progressed rapidly from 6 to 24 hours after the burn and the depth of burn was almost decided within the first 24 hours after the burn. On the other hand, partial thickness burn also advanced from 6 to 24 hours after the burn but the depth deepened at slower level.

• Journal of Korean Society for Quality Management
• /
• v.23 no.4
• /
• pp.148-156
• /
• 1995

The past approach to burn-in optimization have been focused mainly in cost minimization problem during entire product life cycle. But in the case of practical application, burn-in optimization under reliability restriction might be preferred to burn-in optimization by cost minimization. Accordingly this paper shows real examples which estimate the practical burn-in period through application of heuristic method and select the best reliability model through comparison of reliability performance measures.

• Journal of the Korean Burn Society
• /
• v.23 no.2
• /
• pp.64-67
• /
• 2020

High-intensity focused ultrasound (HIFU) has been regarded as a non-invasive uterine-preserving treatment for women with uterine myoma. Numerous studies have reported that it is a relatively safe and effective treatment for uterine myoma. However, severe complications, such as deep thermal burn injuries, bowel perforation, and bladder injury, were reported on rare occasions. We report a case of a 4th degree burn on the lower abdomen after HIFU treatment for uterine myoma. Physicians must consider the possibility of deep thermal burn injuries when managing uterine myoma with HIFU.

• Human Ecology Research
• /
• v.62 no.3
• /
• pp.427-439
• /
• 2024

The purpose of this study was to analyze the financial portfolios of single-person households. For the analysis, The purpose of this study is to verify the mediation effect of stress-coping strategies in the relationship between ego-resiliency and burn-out among childcare center teachers. The subjects were 255 childcare center teachers in Gyeongbuk Province. The measurement tools used for this study include ego-resiliency, burn-out, and stresscoping strategy questionnaires. The collected data points were analyzed via Structural Equation Modeling(SEM), Bootstrapping, Pearson Correlation, using SPSS 21.0 and AMOS 20.0 The results of the study analyzing the Structural Equation Model are as follows. First, teachers' ego-resiliency had a negative influence on burn-out. Second, teachers' problem-focused coping strategies had a negative influence on burn-out, while emotionfocused coping strategies had a positive influence on burn-out. Third, teachers' ego-resiliency had a positive influence on both problem-focused and emotion-focused coping strategies. Fourth, teachers' ego-resiliency had an indirect effect on burn-out by improving both problem-focused and emotion-focused coping strategies. This study suggests that education on the use of problem-focused coping strategies in stressful situations is necessary to successfully manage childcare teachers' burn-out in childcare settings in which mandatory evaluation systems are newly implemented.

• Journal of the Korean Society for Precision Engineering
• /
• v.2 no.3
• /
• pp.41-46
• /
• 1985

The behavior of the burn-on in sand mold has been investigated by varying the pouring metal, bonding materials, additive materials and molding sand. The results obtained from thease experiments are as follows; 1) The burn-on layer of silica sand decreased in order of carbon steel, gray cast iron and stainless steel, and thease burn layer proceeded mostly by producing FeO. 2) The burning reaction of silica sand mold in carbon steel castings declined with increasingly bentonite content, but water-glass scarcely took part in the burn-on reaction. 3) The addition of feldspar and seacoal to silica sand promoted the inhibiting burn-on. 4) The burn-on layer of sand mold decreased of silica sand, chromite sand and olivine sand.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.20 no.1 s.32
• /
• pp.285-293
• /
• 2007

Burn is a dermal injury mainly caused by heat. It occurs by flame, boiling water or liquid, steam, sparks, chemicals, radiation, and electricity. Burn is classified as four grades depending on how deep into the skin a person is burned. As the deep second-degree burns possibly leave scars, it can have various physical, psychological, and aesthetical effects with seriousness on the patient with a burn. This report is on the 50-year-old female patient who had a burn with boiling water and a mixture condition of superficial and deep second degree burn. The Korean medical treatments such as Herbal acupuncture, Herbal medication, Acupuncture, Herbal-ointment were used for 17 days to treat effectively the patient with a mixture of superficial and deep second degree burn. It is difficult to find out the report that treats a burn with Korean medical treatment. If more clinical treatments as in this report are proved to be effective, we are able to expect that Korean medical treatment should be a good treatment in burn.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.1-9
• /
• 2012

Decisions on reliability screening rules and burn-in policies are determined based on the estimated reliability. The variability in a semiconductor manufacturing process does not only causes quality problems but it also makes reliability estimation more complicated. This study investigates the nonuniformity characteristics of integrated circuit reliability according to defect density distribution within a wafer and between wafers then develops optimal burn-in policy based on the estimated reliability. New reliability estimation model based on yield information is developed using a spatial stochastic process. Spatial defect density variation is reflected in the reliability estimation, and the defect densities of each die location are considered as input variables of the burn-in optimization. Reliability screening and optimal burn-in policy subject to the burn-in cost minimization is examined, and numerical experiments are conducted.

• Journal of Ecology and Environment
• /
• v.33 no.4
• /
• pp.351-361
• /
• 2010

The primary purposes for using fire are to enhance marsh vegetation to support waterfowl, and to manage invasive plant species. The study was conducted for two consecutive years in 2004 and 2005, investigating the effects of prescribed fire regimes on vegetation biomass in tidal brackish marsh areas of the Blackwater National Wildlife Refuge located on the eastern shore of Maryland, USA, that are under relatively similar environmental conditions. Four different burn regimes (i.e., annual burn, 3-5 year burn, 7-10 year burn, and no burn) were applied in the study. Above- and below-ground vegetation biomass samples as affected by the different burn regimes were harvested in each year for five plant species native to the marsh; Distichlis spicata, Spartina alterniflora, Schoenoplectus americanus, Spartina cynosuroides and Spartina patens. No significant difference was found either in total above-ground biomass or in above-ground biomass by species between burn regimes in 2004. However, more total above-ground biomass was produced in annual burn regime in 2005 than in the other burn regimes. There were no consistent effects of burning on vegetative biomass production by species, but it seemed D. spicata was somewhat benefited by prescribed burning for its biomass production. Moreover, the stem density for D. spicata under annual burn regime was significantly higher than that in the other burn regimes, showing some positive effects of burning on vegetation. The below-ground biomass was significantly greater in 2004 than in 2005, yet with no significant difference between burn regimes in either year. A longer-term monitoring is strongly recommended.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.16 no.3
• /
• pp.260-267
• /
• 2003

Burn injury is occuring often in our living environment. But there has been little report on the treatment of burn on the basis of Oriental medicine. So we experienced a 53 year old female with second degree burn on the feet and reported the result of the treatment for her with Acupuncture, Herb-med, Negative therapy and Light therapy.