• 한국구조물진단유지관리공학회 논문집
• /
• 제6권2호
• /
• pp.127-133
• /
• 2002

Most structures are constantly influenced by repeated weathering phenomena and load action during a period of its utilization, and their component materials become superannuated and their design performance becomes slowly lost. Therefore, it is thought that it is necessary to develop the online monitoring system that can make a great contribution to the maintenance management and disaster prevention of the building structure by sensing any slight change of the entire structure regardless of its inside and outside. Especially, this study was intended to explain the entire system of the online structure by interpreting welded built-up H-beams, of structural steel members having many advantages in terms of the qualities of structural materials, through limit state design, and presenting the basic plan to apply it to the structure.

• International Journal of Korean Welding Society
• /
• 제3권2호
• /
• pp.7-14
• /
• 2003

During the manufacture of a ship, longitudinal deformation is produced by fillet welding on the Built­Up beam used to improve the longitudinal strength of a ship. This deformation needs a correcting process separate from a manufacture process and decreases productivity and quality. This deformation is caused by welding moment, which is the value multiplied the shrinking force due to welding by the distance from the neutral axis on a cross section of Built­Up beam. This deformation can be offset by generating a moment which is the same magnitude with and is located in an opposite direction to the welding moment on web plate by induction heating. Accordingly, this study clarifies the creation mechanism of the longitudinal deformation on Built­Up beam with FEM analysis and presents the preventative method of this deformation by induction heating basing the mechanism and verifies its validity through analysis and experiments. The induction heating used here is performed by deciding its location and quantity with experiments and simple equations and by applying them to a real structure.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• 제1호
• /
• pp.67-74
• /
• 2001

Now that importance of landscape planning unique to each area is emphasized, it is necessary to conduct landscape planning by taking advantage of natural environments unique to each ares, because its natural environments are regarded as one of the assets the area possesses. This study targets at Kawachinagano City, Osaka, one of the residential areas that I not only rich in natural and historical elements, but also has been rapidly growing. The purposes of this study are to evaluate change in landscape structure over time by analyzing relation between landform and pattern of expanding the built-up area at three time points of 1932, 1967, and 1994 with GIS (ARC/INFO 7.0.3, ARC/View 3.0 (ESRI)), as well as to make some suggestions for planning landscape unique to the area. Data on main ridges, sub ridges, main rivers, and other landform were read from the elevation map, and data on woodland, and parks and open spaces (having more than 3 ha area) were read from the existing land use map. The data were used to understand the natural structure of the city from topographic viewpoint. Next, the existing land use map prepared with data on the built-up area and urban axes consisting of roads and streets were overlaid on the elevation map in order to understand relation between pattern of expanding the built-up area and the natural structure.

• 한국소음진동공학회논문집
• /
• 제24권12호
• /
• pp.999-1006
• /
• 2014

Mindlin plate theory includes the shear deformation and rotatory inertia effects which cannot be negligible as exciting frequency increases. The statistical methods such as energy flow analysis(EFA) and statistical energy analysis(SEA) are very useful for estimation of structure-borne sound of various built-up structures. For the reliable vibrational analysis of built-up structures at high frequencies, the energy transfer relationship between out-of-plane waves and in-plane waves exist in Mindlin plates coupled at arbitrary angles must be derived. In this paper, the new wave transmission analysis is successfully performed for various energy analyses of Mindlin plates coupled at arbitrary angles.

• 한국정밀공학회지
• /
• 제16권9호
• /
• pp.117-122
• /
• 1999

Track rubber parts has heat built-up as long as dynamic loading is applied from running tracked vehicles. Durability is required for rubber part to sustain the heat accumulation and heat exchange between rubber-metal assembly and environmental air and ground. For this research, the track assembly was divided into four parts i.e., bottom track shoe, upper track pad, pin busing and metal structure. Three rubber parts and metal structure were modelled and analyzed with MARC package program to obtain time-temperature data which was induced form mechanical work of tracked vehicles. heat accumulation data was obtained from special experiments under the room temperature of 25$^{\circ}C\;and\;35^{\circ}C$ to simulate the actual environmental conditions. From this research, it is cleared that the environmental temperature does not affect to the heat accumulation speed in rubber parts. Also, the heat built-up mechanism was clarified from the thermo-mechanical work based on numerical analysis and experiments.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.389-394
• /
• 2017

선체구조의 보강재로서 비대칭 단면재인 L 형강재가 대칭 단면재인 T형 조립부재(built-up T)에 비해 단면 비틀림 현상 등 다소 불리한 강도 특성에도 불구하고 오랜 관습과 자재 구입의 용이성 등으로 널리 사용되어 왔다. 그러나 근래 선박이 대형화 되어감에 따라 보강재의 형태는 압출 형강재의 사용이 줄고 다양한 설계 치수를 반영하여 용접을 통해 직접 제작하는 조립부재의 적용이 늘어가는 추세이다. 본 연구의 목적은 점차 사용량이 증대되고 있는 조립형 보강재의 효율적인 적용을 위한 최적설계 프로그램을 개발하는데 있다. 최적화 알고리즘으로는 선박 및 해양구조물의 최적설계에 많이 적용되고 있는 진화전략 기법을 선정하였다. 최적설계 결과의 실용성을 위해 부식여유를 고려한 총두께 개념을 설계변수와 목적함수에 도입하였고, 제한조건에는 최근 발효된 통합공통구조규칙(HCSR, Harmonized Common Structural Rules)을 적용하였다. 개발된 최적화 프로그램을 이용하여 최근 수주된 300K VLCC와 158K COT의 실선 설계를 수행한 결과 각각 144톤, 60톤의 중량 절감 효과를 얻었으며 대형 선박일수록 중량 절감 효과가 크게 나타남을 확인하였다.

• 건축사
• /
• 통권480호
• /
• pp.62-69
• /
• 2009

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.816-825
• /
• 2002

During the manufacture of a ship, longitudinal deformation is produced by fillet welding on the BuiltUp beam used to improve the longitudinal strength of a ship. This deformation needs a correcting process separate from a manufacture process and decreases productivity and quality. This deformation is caused by welding moment, which is the value multiplied the shrinking force due to welding by the distance from the neutral axis on a cross section of Built-Up beam. This deformation can be offset by generating a moment which is the same magnitude with and is located in an opposite direction to the welding moment on web plate by induction heating. Accordingly, this study clarifies the creation mechanism of the longitudinal deformation on Built-Up beam with FEM analysis and presents the preventative method of this deformation by induction heating basing the mechanism and verifies its validity through analysis and experiments. The induction heating used here is performed by deciding its location and quantity with experiments and simple equations and by applying them to areal structure.

• 한국강구조학회 논문집
• /
• 제28권2호
• /
• pp.75-83
• /
• 2016

기존 콘크리트충전 각형강관(CFT) 구조에 사용하는 각형강관은 4개의 판을 용접하여 제작하는 박스칼럼이 일반적이다. 그러나 이러한 강관은 제작효율이 저하되며, 또한 기둥-보 접합부에는 내측 다이아프램과 관통 다이아프램을 용접하는데 특수한 용접기술이 필요하다. 따라서, 얇은 강판을 절곡하는 방식으로 응력집중 위치의 용접을 피하고, 단면효율이 극대화된 내부앵커 돌출형의 용접조립 각형강관을 개발하게 되었다. 용접조립 각형강관은 강관내부에 스티프너가 설치되어 내측 다이아프램과 관통 다이아프램과 간섭이 발생하게 되므로 본 연구에서는 용접조립 각형CFT 기둥-보 접합부로 외다이아프램형식을 채택하고 외다이아프램의 설계식을 제안하였으며, 기둥-보 접합부의 거동을 파악하기 위해 실대형 4개 실험체를 제작하여 구조거동 및 내력을 분석하였다.

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.146-152
• /
• 2010

Recently, the applied frequency of composite materials was increased from the viewpoint of lightweight, high strength and low cost when a leisure boat and a fishing boatwere built. However, studies on the mechanical properties of composite material with ship are rare. Specially, a leisure boat and fishing boat with FRP had been built by hand lay-up method. However, the vacuum infusion method is rising recently for ship building. The manufactured these FRP plates were combined by using the adhesive. Therefore, in this study Cleavage peel strength, Shear strength and fatigue limit of adhesive bonds by tensileloading were estimated. From test results, the strengths of FRP specimens made by the vacuum infusion method are higher than that of the hand lay-up method.