• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제3권5호
• /
• pp.129-140
• /
• 2014

기존의 메모리에서 발생하는 다양한 고장들을 검출하기 위한 기법으로 BIST(Built-in self test)가 있고 고장이 검출되면 Spare를 할당하여 수리하는 BIRA(Built-in redundancy analysis)가 있다. 그리고 BIST와 BIRA를 통합한 형태인 BISR(Built-in self repair)를 통해 전체 메모리의 수율을 증가시킬 수 있다. 그러나 이전에 제안된 기법들은 RAM을 위해 제안된 기법으로 RAM의 메모리 구조와 특성이 다른 NAND-형 플래시 메모리에 사용하기에는 NAND-형 플래시 메모리의 고유 고장인 Disturbance를 진단하기 어렵다. 따라서 본 논문에서는 NAND-형 플래시 메모리에서 발생하는 Disturbance 고장을 검출하고 고장의 위치도 진단할 있는 BISD(Built-in self diagnosis)와 고장 블록을 수리할 수 있는 BISR을 제안한다.

• 전자공학회논문지
• /
• 제50권6호
• /
• pp.122-130
• /
• 2013

메모리반도체산업이 성장함에 따라 수요와 공급이 큰 폭으로 증가하고 있다. 그 중 플래시 메모리가 스마트폰, 테블릿PC, SoC(System on Chip)산업에 많이 사용되고 있다. 플래시 메모리는 NOR-형 플래시 메모리와 NAND-형 플래시 메모리로 나뉜다. NOR-형 플래시 메모리는 BIST(Built-In Self Test), BISR(Built-In Self Repair), BIRA(Built-In Redundancy Analysis) 등 많은 연구가 진행되었지만 NAND-형 플래시 메모리 BIST는 연구가 진행되지 않았다. 현재 NAND-형 플래시 메모리 패턴 테스트는 고가의 외부 테스트 장비를 사용하여 테스트를 수행하고 있다. NAND-형 플래시 메모리에서는 블록단위로 소거, 페이지 단위로 읽기, 쓰기 동작이 가능하기 때문에 자체 내장 테스트가 존재하지 않고 외부장비에 의존하고 있다. 고가의 외부 패턴 테스트 장비에 의존해서 테스트를 수행하던 NAND-형 플래시 메모리를 외부 패턴 테스트 장비 없이 패턴 테스트를 수행할 수 있도록 두 가지의 유한 상태 머신 기반 구조를 갖고 있는 BIST를 제안한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.438-439
• /
• 2011

Substations in Korea are classified into an outdoor steel structure type, an outdoor GIS(Gas Insulated Switchgear) type, an indoor GIS type, an underground GIS type, and a complex GIS type. Before 1970, substations were built in outdoor steel structure types only. In 1980, an 154kV indoor GIS type substation was built for the first time in Pusan. And the first 345kV indoor GIS type substation, the first 765kV full GIS substation were built in 1984 and in 2002 each. In 1998, 154kV indoor type substations were standardized into regular type and urban type which applied steel frames to structures. In 2002, this was re-standardized into five different types in detail. In 2007, hub substations which had high capacity were built in the region of industrial zone and heavy load areas. And 154kV compact substation was developed and standardized by compacting an indoor GIS type substation in 2009. This paper would present a series of substation type transition and application standards for substation types and facility scales.

• 건축역사연구
• /
• 제1권1호
• /
• pp.129-141
• /
• 1992

The purpose of this study was to investigate type of the modern architecture in Daegu province, based on 91 buildings which were built from 1886 to 1945 in Daegu province. The results of this study could be summarized as follows : The modern buildings were built by the western missionary, Japanese, Chineses and Korean. The catholic, built Korean style cathedral and parsonage early in the missionary period, then changed to build Gothic revival and georgian style masonary buildings. The protestant built eclectic buildings. With masonary structure and Korean roof style. Then from 1930's, they started to build Gothic revival style buildings. Japanese built eclectic buildings which mixed with Western and Japan type during the first period. Then, they also started to build Western eclectic building. Chinese built only two buildings during the whole periods and those were Western eclectic style buildings. Korean started to build commercial and school buildings which were Western style from the middle of the second period by nationalist and local commercialist.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.163-164
• /
• 2007

In this study, we developed intelligent spacer built in the internal type UHF PD sensors. 3-Dimensional electro-magnetic simulations were performed to analyze electric-field distribution of the single-phase GIS and three-phase GIS. After considering the spacer's specification, Sensor structures were designed and analyzed using the 3-D EM Simulator. As a result of the simulation the internal type UHF PD sensors were built in. Performance of the sensor built into real scale GIS spacer was measured in terms of return loss and detected Max voltage. And we identified a character of the intelligent spacer by using 5pC partial discharge ceil.

• 한국농촌건축학회논문집
• /
• 제18권2호
• /
• pp.11-18
• /
• 2016

The collapsing accidents of greenhouse frames have been increased yearly due to strong wind and heavy snow, but as it was, there were few studies about the structural safety of greenhouses. Therefore, this study was carried out to develop the stress tolerant structural frame systems in built-up greenhouses. The vertical loading experiment of developed scale models were implemented and the developed types of models were simulated by 3-D analysis program in this study. These types of models, which are existing type and honeycomb type, in arch and standard style frames were classified. As a result of this study, it was verified that the honeycomb type model of arch style frame is better than the existing type model of it in stress resistance against snow load and wind load.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.436-437
• /
• 2011

Before 1970s, 154kV substations in Korea were built in outdoor steel structure types only. In early 1970s, Germany developed GIS and the first indoor GIS type substation was built in Korea in 1980. In 1998, 154kV indoor type substations were standardized into regular type and urban type which applied steel frames to structures. In 2002, this was re-standardized into five different types in detail. In 2009, 154kV compact substation design was developed and standardized and saved about 20% of the construction cost with new technology and methods. Compact substations were classified into three types ; urban type, multi-function type, and regular type. The first urban type compact substation, Jang-ki substation, was built in Kimpo in June, 2010. This paper would present the standard model of 154kV compact substation and the way of improving facilities for the first compact substation.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.105-110
• /
• 2001

Unsteady-state temperature distributions for spindle system with built-in motor according to spindle type are studied. For the analysis, three dimensional model is built considering heat transfer characteristics such as natural and forced convection coefficients. Temperature distributions are analyzed by using the finite element method. Results of analysis are compared.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.51-55
• /
• 2003

In this paper, the authors propose a new high performance Built-in Type spindle motor drive using vector-controlled technique at 15,000 r/min. Control method is changed by variation of motor speed in a conventional Built-in type spindle drive. In the drive system to be presented, the conventional vector control is used in the low-speed range, and the vector control without encoder is used in the high-speed range. Furthermore, in order to drive the motor from 0 to 15,000 rpm smoothly, the vector control with encoder in the low-speed range (from 0 to 8,000 rpm) is utilized and the vector control without encoder in the high-speed range (from 8,000 to 15,000 rpm) is utilized. This paper describes problem of control method in conventional spindle drive and proposes control method as variation of motor speed

• 한국컴퓨터정보학회논문지
• /
• 제21권5호
• /
• pp.11-18
• /
• 2016

Linked Data is a web standard data definition method devised to connect, expand resources with a standardized type. Linked Data built in various areas expands existing knowledge through an open data cloud like LOD(Linked Open Data). A project to link and service existing knowledge through LOD is under way worldwide. However, LOD project in domestic is being participated in a specific field to the level of research. In this paper, we suggests a method to build the area of technical knowledge like legislations in type of Linked Data, and distribute such Linked Data built to LOD. The construction method suggested by this paper divides knowledge of legislations in structural, semantic, and integrated perspective, and builds each of them by converting to Linked Data according to the perspective. Also, such built Linked Legal Data prepares to link knowledge in a standardized type by distributing them onto LOD. Built Linked Legal Data are equipped with schema for link service in various types, and give help increase understand the access type to existing legal information.